linux-kernel - Re: [PATCH 12/14] regulator: pwm: Retrieve correct voltage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160603205540.GJ124478@google.com>
Date:	Fri, 3 Jun 2016 13:55:40 -0700
From:	Brian Norris <briannorris@...omium.org>
To:	Boris Brezillon <boris.brezillon@...e-electrons.com>
Cc:	Thierry Reding <thierry.reding@...il.com>,
	linux-pwm@...r.kernel.org, Mark Brown <broonie@...nel.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Heiko Stuebner <heiko@...ech.de>,
	linux-rockchip@...ts.infradead.org,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Milo Kim <milo.kim@...com>,
	Doug Anderson <dianders@...gle.com>,
	Caesar Wang <wxt@...k-chips.com>,
	Stephen Barber <smbarber@...omium.org>,
	Ajit Pal Singh <ajitpal.singh@...com>,
	Srinivas Kandagatla <srinivas.kandagatla@...il.com>,
	Maxime Coquelin <maxime.coquelin@...com>,
	Patrice Chotard <patrice.chotard@...com>, kernel@...inux.com
Subject: Re: [PATCH 12/14] regulator: pwm: Retrieve correct voltage

On Fri, Jun 03, 2016 at 10:23:10AM +0200, Boris Brezillon wrote:
> The continuous PWM voltage regulator is caching the voltage value in
> the ->volt_uV field. While most of the time this value should reflect the
> real voltage, sometime it can be sightly different if the PWM device
> rounded the set_duty_cycle request.
> Moreover, this value is not valid until someone has modified the regulator
> output.
> 
> Remove the ->volt_uV field and always rely on the PWM state to calculate
> the regulator output.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> ---
> Mark,
> 
> I know you already added your Tested-by/Acked-by tags on this patch
> but this version has slightly change and is now making use of the
> pwm_get_relative_duty_cycle() helper instead of manually converting
> the absolute duty_cycle value into a relative one.
> ---
>  drivers/regulator/pwm-regulator.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index 8c56e16..c39ecd1 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -35,9 +35,6 @@ struct pwm_regulator_data {
>  	struct regulator_ops ops;
>  
>  	int state;
> -
> -	/* Continuous voltage */
> -	int volt_uV;
>  };
>  
>  struct pwm_voltages {
> @@ -135,8 +132,13 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
>  static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
>  {
>  	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
> +	int min_uV = rdev->constraints->min_uV;
> +	int diff = rdev->constraints->max_uV - min_uV;
> +	struct pwm_state pstate;
>  
> -	return drvdata->volt_uV;
> +	pwm_get_state(drvdata->pwm, &pstate);
> +
> +	return min_uV + pwm_get_relative_duty_cycle(&pstate, diff);
>  }
>  
>  static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
> @@ -162,8 +164,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
>  		return ret;
>  	}
>  
> -	drvdata->volt_uV = min_uV;
> -
>  	/* Delay required by PWM regulator to settle to the new voltage */
>  	usleep_range(ramp_delay, ramp_delay + 1000);
>  

Reviewed-by: Brian Norris <briannorris@...omium.org>
Tested-by: Brian Norris <briannorris@...omium.org>