| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160605213907.038700542@linuxfoundation.org>
Date: Sun, 5 Jun 2016 14:41:13 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Larry Finger <Larry.Finger@...inger.net>,
Kalle Valo <kvalo@...eaurora.org>
Subject: [PATCH 4.4 40/99] rtlwifi: btcoexist: Implement antenna selection
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <Larry.Finger@...inger.net>
commit baa1702290953295e421f0f433e2b1ff4815827c upstream.
The previous patch added an option to rtl8723be to manually select the
antenna for those cases when only a single antenna is present, and the
on-board EEPROM is incorrectly programmed. This patch implements the
necessary changes in the Bluetooth coexistence driver.
Signed-off-by: Larry Finger <Larry.Finger@...inger.net>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c | 9 ++-
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c | 27 +++++++++-
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h | 2
drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c | 5 +
4 files changed, 38 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
@@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(st
/* Force GNT_BT to low */
btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0);
- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
/* tell firmware "no antenna inverse" */
@@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(st
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
} else {
/* tell firmware "antenna inverse" */
h2c_parameter[0] = 1;
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
}
}
/* ext switch setting */
if (use_ext_switch) {
/* fixed internal switch S1->WiFi, S0->BT */
- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+ if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT)
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+ else
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
+
switch (antpos_type) {
case BTC_ANT_WIFI_AT_MAIN:
/* ext switch main at wifi */
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type
}
}
-void exhalbtc_set_ant_num(u8 type, u8 ant_num)
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num)
{
if (BT_COEX_ANT_TYPE_PG == type) {
gl_bt_coexist.board_info.pg_ant_num = ant_num;
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ /* The antenna position:
+ * Main (default) or Aux for pgAntNum=2 && btdmAntNum =1.
+ * The antenna position should be determined by
+ * auto-detect mechanism.
+ * The following is assumed to main,
+ * and those must be modified
+ * if y auto-detect mechanism is ready
+ */
+ if ((gl_bt_coexist.board_info.pg_ant_num == 2) &&
+ (gl_bt_coexist.board_info.btdm_ant_num == 1))
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
+ else
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
} else if (BT_COEX_ANT_TYPE_ANTDIV == type) {
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
+ } else if (type == BT_COEX_ANT_TYPE_DETECTED) {
+ gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ if (rtlpriv->cfg->mod_params->ant_sel == 1)
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_AUX_PORT;
+ else
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
}
}
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
@@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 b
void exhalbtc_update_min_bt_rssi(char bt_rssi);
void exhalbtc_set_bt_exist(bool bt_exist);
void exhalbtc_set_chip_type(u8 chip_type);
-void exhalbtc_set_ant_num(u8 type, u8 ant_num);
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num);
void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist);
void exhalbtc_signal_compensation(struct btc_coexist *btcoexist,
u8 *rssi_wifi, u8 *rssi_bt);
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
@@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_pr
__func__, bt_type);
exhalbtc_set_chip_type(bt_type);
- exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num);
+ if (rtlpriv->cfg->mod_params->ant_sel == 1)
+ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1);
+ else
+ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num);
}
void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)
Powered by blists - more mailing lists