[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 6 Jun 2016 12:27:54 +0100
From: Mark Rutland <mark.rutland@....com>
To: Frank Wang <frank.wang@...k-chips.com>
Cc: heiko@...ech.de, dianders@...omium.org, linux@...ck-us.net,
groeck@...omium.org, jwerner@...omium.org, kishon@...com,
robh+dt@...nel.org, pawel.moll@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-usb@...r.kernel.org, linux-rockchip@...ts.infradead.org,
xzy.xu@...k-chips.com, kever.yang@...k-chips.com,
huangtao@...k-chips.com, william.wu@...k-chips.com
Subject: Re: [PATCH v3 1/2] Documentation: bindings: add DT documentation for
Rockchip USB2PHY
On Mon, Jun 06, 2016 at 05:20:03PM +0800, Frank Wang wrote:
> Signed-off-by: Frank Wang <frank.wang@...k-chips.com>
> ---
>
> Changes in v3:
> - Added 'clocks' and 'clock-names' optional properties.
> - Specified 'otg-port' and 'host-port' as the sub-node name.
>
> Changes in v2:
> - Changed vbus_host optional property from gpio to regulator.
> - Specified vbus_otg-supply optional property.
> - Specified otg_id and otg_bvalid property.
>
> .../bindings/phy/phy-rockchip-inno-usb2.txt | 60 ++++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> new file mode 100644
> index 0000000..0b4bbbb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> @@ -0,0 +1,60 @@
> +ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
> +
> +Required properties (phy (parent) node):
> + - compatible : should be one of the listed compatibles:
> + * "rockchip,rk3366-usb2phy"
> + * "rockchip,rk3399-usb2phy"
> + - #clock-cells : should be 0.
> + - clock-output-names : specify the 480m output clock name.
> +
> +Optional properties:
> + - clocks : phandle + phy specifier pair, for the input clock of phy.
> + - clock-names : input clock name of phy, must be "phyclk".
> + - vbus_host-supply : phandle to a regulator that supplies host vbus.
> + - vbus_otg-supply : phandle to a regulator that supplies otg vbus.
Nit: s/_/-/ here.
Otherwise the rest of this looks generally fine, though I'm confused as
to how you address the programming interface(s), given none are
described.
Thanks,
Mark.
> +
> +Required nodes : a sub-node is required for each port the phy provides.
> + The sub-node name is used to identify host or otg port,
> + and shall be the following entries:
> + * "otg-port" : the name of otg port.
> + * "host-port" : the name of host port.
> +
> +Required properties (port (child) node):
> + - #phy-cells : must be 0. See ./phy-bindings.txt for details.
> + - interrupts : specify an interrupt for each entry in interrupt-names.
> + - interrupt-names : a list which shall be the following entries:
> + * "otg_id" : for the otg id interrupt.
> + * "otg_bvalid" : for the otg vbus interrupt.
> + * "linestate" : for the host/otg linestate interrupt.
> +
> +Example:
> +
> +grf: syscon@...70000 {
> + compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> +...
> +
> + u2phy: usb2-phy {
> + compatible = "rockchip,rk3366-usb2phy";
> + #clock-cells = <0>;
> + clock-output-names = "sclk_otgphy0_480m";
> +
> + u2phy_otg: otg-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "otg_id", "otg_bvalid", "linestate";
> + status = "okay";
> + };
> +
> + u2phy_host: host-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "linestate";
> + status = "okay";
> + };
> + };
> +};
> --
> 1.7.9.5
>
>
Powered by blists - more mailing lists