linux-kernel - Re: [RESEND PATCH v2] power_supply: power_supply_read_temp only if use

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <57567654.5060503@samsung.com>
Date:	Tue, 07 Jun 2016 09:23:00 +0200
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Rhyland Klein <rklein@...dia.com>,
	Sebastian Reichel <sre@...nel.org>,
	Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
	David Woodhouse <dwmw2@...radead.org>
Cc:	linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
	Jon Hunter <jonathanh@...dia.com>, stable@...r.kernel.org
Subject: Re: [RESEND PATCH v2] power_supply: power_supply_read_temp only if
 use_cnt > 0

On 06/06/2016 06:56 PM, Rhyland Klein wrote:
> Add check to power_supply_read_temp() to only use the power_supply
> get_property() callback if the use_cnt is > 0. The use_cnt will
> be incremented at the end of __power_supply_register, so this will
> block to case where get_property can be called before the supply
> is fully registered. This fixes the issue show in the stack below:
> 
> [    1.452598] power_supply_read_temp+0x78/0x80
> [    1.458680] thermal_zone_get_temp+0x5c/0x11c
> [    1.464765] thermal_zone_device_update+0x34/0xb4
> [    1.471195] thermal_zone_device_register+0x87c/0x8cc
> [    1.477974] __power_supply_register+0x364/0x424
> [    1.484317] power_supply_register_no_ws+0x10/0x18
> [    1.490833] bq27xxx_battery_setup+0x10c/0x164
> [    1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0
> [    1.503435] i2c_device_probe+0x174/0x240
> [    1.509172] driver_probe_device+0x1fc/0x29c
> [    1.515167] __driver_attach+0xa4/0xa8
> [    1.520643] bus_for_each_dev+0x58/0x98
> [    1.526204] driver_attach+0x20/0x28
> [    1.531505] bus_add_driver+0x1c8/0x22c
> [    1.537067] driver_register+0x68/0x108
> [    1.542630] i2c_register_driver+0x38/0x7c
> [    1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20
> [    1.555321] do_one_initcall+0x38/0x12c
> [    1.560886] kernel_init_freeable+0x148/0x1ec
> [    1.566972] kernel_init+0x10/0xfc
> [    1.572101] ret_from_fork+0x10/0x40
> 
> Cc: stable@...r.kernel.org
> Signed-off-by: Rhyland Klein <rklein@...dia.com>

And maybe:
Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core")


> ---
> v2:
>  - Added cc stable
>  - changed return to -EAGAIN in case of use_cnt < 1
>  - Removed WARNING
>  - return value check added in additional patch:
>   "thermal: helpers: Check return value of get_temp"
> 
>  drivers/power/power_supply_core.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
> index 456987c88baa..bbd80631f31e 100644
> --- a/drivers/power/power_supply_core.c
> +++ b/drivers/power/power_supply_core.c
> @@ -561,11 +561,15 @@ static int power_supply_read_temp(struct thermal_zone_device *tzd,
>  {
>  	struct power_supply *psy;
>  	union power_supply_propval val;
> -	int ret;
> +	int ret = -EAGAIN;
>  
>  	WARN_ON(tzd == NULL);
> +
>  	psy = tzd->devdata;
> -	ret = psy->desc->get_property(psy, POWER_SUPPLY_PROP_TEMP, &val);
> +
> +	if (atomic_read(&psy->use_cnt) > 0)
> +		ret = psy->desc->get_property(psy, POWER_SUPPLY_PROP_TEMP,
> +					      &val);

How about using just power_supply_get_property() and convert return
value to EAGAIN?

Anyway probably such check should be present also on other
get_property() calls, like thermal cooling path.

Best regards,
Krzysztof