| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 7 Jun 2016 10:30:16 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: <thloh@...era.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
<galak@...eaurora.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: Re: [PATCH v3 1/1] net: ethernet: Add TSE PCS support to
dwmac-socfpga
Hello
On 6/7/2016 5:01 AM, thloh@...era.com wrote:
> From: Tien Hock Loh <thloh@...era.com>
>
> This adds support for TSE PCS that uses SGMII adapter when the phy-mode of
> the dwmac is set to sgmii
>
> Signed-off-by: Tien Hock Loh <thloh@...era.com>
>
> ---
> v2:
> - Refactored the TSE PCS out from the dwmac-socfpga.c file
> - Added binding documentation for TSE PCS sgmii adapter
> v3:
> - Added missing license header for new source files
> - Updated tse_pcs.h include headers
> - Standardize if statements
> ---
> .../devicetree/bindings/net/socfpga-dwmac.txt | 4 +
> drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
> .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 140 +++++++++--
> drivers/net/ethernet/stmicro/stmmac/tse_pcs.c | 261 +++++++++++++++++++++
> drivers/net/ethernet/stmicro/stmmac/tse_pcs.h | 36 +++
> 5 files changed, 419 insertions(+), 24 deletions(-)
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/tse_pcs.c
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/tse_pcs.h
I just wonder if it could make sense to rename the
tse_pcs.[hc] files or creating a sub-directory for altera devel.
It seems that tse_pcs.[hc] are common files but this support
is for Altera.
Anyway, I let you decide and I also ask you to update the stmmac.txt
file.
> diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
> index 3a9d679..2bc39f1 100644
> --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
> +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
> @@ -15,6 +15,8 @@ Required properties:
> Optional properties:
> altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
> DWMAC controller is connected emac splitter.
> +phy-mode: The phy mode the ethernet operates in
> +altr,sgmii_to_sgmii_converter: phandle to the TSE SGMII converter
>
> Example:
>
> @@ -28,4 +30,6 @@ gmac0: ethernet@...00000 {
> mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
> clocks = <&emac_0_clk>;
> clock-names = "stmmaceth";
> + phy-mode = "sgmii";
> + altr,gmii_to_sgmii_converter = <&sgmii_1_gmii_to_sgmii_converter_0>;
> };
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index 73c2715..29c1dee 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
>
> obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
> stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \
> - dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
> + dwmac-sti.o dwmac-socfpga.o dwmac-rk.o tse_pcs.o
>
> obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
> stmmac-pci-objs:= stmmac_pci.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> index 3f9588e..88fba4e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> @@ -27,6 +27,8 @@
> #include "stmmac.h"
> #include "stmmac_platform.h"
>
> +#include "tse_pcs.h"
> +
> #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
> #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
> #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
> @@ -47,48 +49,60 @@ struct socfpga_dwmac {
> struct regmap *sys_mgr_base_addr;
> struct reset_control *stmmac_rst;
> void __iomem *splitter_base;
> + struct tse_pcs pcs;
> };
>
> static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
> {
> struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv;
> void __iomem *splitter_base = dwmac->splitter_base;
> + void __iomem *tse_pcs_base = dwmac->pcs.tse_pcs_base;
> + void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base;
> + struct device *dev = dwmac->dev;
> + struct net_device *ndev = dev_get_drvdata(dev);
> + struct phy_device *phy_dev = ndev->phydev;
> u32 val;
>
> - if (!splitter_base)
> - return;
> -
> - val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
> - val &= ~EMAC_SPLITTER_CTRL_SPEED_MASK;
> -
> - switch (speed) {
> - case 1000:
> - val |= EMAC_SPLITTER_CTRL_SPEED_1000;
> - break;
> - case 100:
> - val |= EMAC_SPLITTER_CTRL_SPEED_100;
> - break;
> - case 10:
> - val |= EMAC_SPLITTER_CTRL_SPEED_10;
> - break;
> - default:
> - return;
> + if (splitter_base) {
> + val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
> + val &= ~EMAC_SPLITTER_CTRL_SPEED_MASK;
> +
> + switch (speed) {
> + case 1000:
> + val |= EMAC_SPLITTER_CTRL_SPEED_1000;
> + break;
> + case 100:
> + val |= EMAC_SPLITTER_CTRL_SPEED_100;
> + break;
> + case 10:
> + val |= EMAC_SPLITTER_CTRL_SPEED_10;
> + break;
> + default:
> + return;
> + }
> + writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
> }
>
> - writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
> + if ((tse_pcs_base) && (sgmii_adapter_base))
> + tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
> }
>
> -static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
> +static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac,
> + struct device *dev)
> {
> struct device_node *np = dev->of_node;
> struct regmap *sys_mgr_base_addr;
> u32 reg_offset, reg_shift;
> - int ret;
> - struct device_node *np_splitter;
> + int ret, index;
> + struct device_node *np_splitter = NULL;
> + struct device_node *np_sgmii_adapter = NULL;
> +
> struct resource res_splitter;
> + struct resource res_tse_pcs;
> + struct resource res_sgmii_adapter;
>
> dwmac->stmmac_rst = devm_reset_control_get(dev,
> - STMMAC_RESOURCE_NAME);
> + STMMAC_RESOURCE_NAME);
> if (IS_ERR(dwmac->stmmac_rst)) {
> dev_info(dev, "Could not get reset control!\n");
> if (PTR_ERR(dwmac->stmmac_rst) == -EPROBE_DEFER)
> @@ -99,6 +113,7 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
> dwmac->interface = of_get_phy_mode(np);
>
> sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
> +
> if (IS_ERR(sys_mgr_base_addr)) {
> dev_info(dev, "No sysmgr-syscon node found\n");
> return PTR_ERR(sys_mgr_base_addr);
> @@ -130,6 +145,74 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
> }
> }
>
> + np_sgmii_adapter = of_parse_phandle(np,
> + "altr,gmii_to_sgmii_converter", 0);
> + if (np_sgmii_adapter) {
> + index = of_property_match_string(np_sgmii_adapter, "reg-names",
> + "hps_emac_interface_splitter_avalon_slave");
> +
> + if (index >= 0) {
> + if (of_address_to_resource(np_sgmii_adapter, index,
> + &res_splitter)) {
> + dev_err(dev, "%s: ERROR: missing emac splitter address\n",
> + __func__);
> + return -EINVAL;
> + }
> +
> + dwmac->splitter_base = devm_ioremap_resource(
> + dev, &res_splitter);
> +
> + if (IS_ERR(dwmac->splitter_base)) {
> + dev_err(dev, "%s: ERROR: failed mapping emac splitter\n",
> + __func__);
> + return PTR_ERR(dwmac->splitter_base);
> + }
> + }
> +
> + index = of_property_match_string(np_sgmii_adapter, "reg-names",
> + "gmii_to_sgmii_adapter_avalon_slave");
> +
> + if (index >= 0) {
> + if (of_address_to_resource(np_sgmii_adapter, index,
> + &res_sgmii_adapter)) {
> + dev_err(dev,
> + "%s: ERROR: failed mapping adapter\n",
> + __func__);
> + return -EINVAL;
> + }
> +
> + dwmac->pcs.sgmii_adapter_base =
> + devm_ioremap_resource(dev, &res_sgmii_adapter);
> +
> + if (IS_ERR(dwmac->pcs.sgmii_adapter_base)) {
> + dev_err(dev, "%s: failed to mapping adapter\n",
> + __func__);
> + return PTR_ERR(dwmac->pcs.sgmii_adapter_base);
> + }
> + }
> +
> + index = of_property_match_string(np_sgmii_adapter, "reg-names",
> + "eth_tse_control_port");
reg-names looks to be specific and mandatory, IMO they should be
documented in the binding.
> +
> + if (index >= 0) {
> + if (of_address_to_resource(np_sgmii_adapter, index,
> + &res_tse_pcs)) {
> + dev_err(dev,
> + "%s: ERROR: failed mapping tse control port\n",
> + __func__);
> + return -EINVAL;
> + }
> +
> + dwmac->pcs.tse_pcs_base = devm_ioremap_resource(
> + dev, &res_tse_pcs);
can you check with indentation (scripts/Lindent)?
> +
> + if (IS_ERR(dwmac->pcs.tse_pcs_base)) {
> + dev_err(dev, "%s: ERROR: failed mapping tse control port\n",
> + __func__);
> + return PTR_ERR(dwmac->pcs.sgmii_adapter_base);
> + }
> + }
> + }
> dwmac->reg_offset = reg_offset;
> dwmac->reg_shift = reg_shift;
> dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
> @@ -153,6 +236,7 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
> break;
> case PHY_INTERFACE_MODE_MII:
> case PHY_INTERFACE_MODE_GMII:
> + case PHY_INTERFACE_MODE_SGMII:
> val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
> break;
> default:
> @@ -172,6 +256,10 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
> ctrl |= val << reg_shift;
>
> regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
> +
> + if (phymode == PHY_INTERFACE_MODE_SGMII)
> + tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs);
> +
> return 0;
> }
>
> @@ -191,6 +279,12 @@ static void *socfpga_dwmac_probe(struct platform_device *pdev)
> return ERR_PTR(ret);
> }
>
> + ret = socfpga_dwmac_setup(dwmac);
> + if (ret) {
> + dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> return dwmac;
> }
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/tse_pcs.c
> new file mode 100644
> index 0000000..1989bd1
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/tse_pcs.c
> @@ -0,0 +1,261 @@
> +/* Copyright Altera Corporation (C) 2016. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2,
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Author: Tien Hock Loh <thloh@...era.com>
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_net.h>
> +#include <linux/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/stmmac.h>
> +
> +#include "stmmac.h"
> +#include "stmmac_platform.h"
> +#include "tse_pcs.h"
> +
> +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
> +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
> +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
> +#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
> +#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
> +
> +#define EMAC_SPLITTER_CTRL_REG 0x0
> +#define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3
> +#define EMAC_SPLITTER_CTRL_SPEED_10 0x2
> +#define EMAC_SPLITTER_CTRL_SPEED_100 0x3
> +#define EMAC_SPLITTER_CTRL_SPEED_1000 0x0
pls use BIT and GENMASK.
...
> +static void config_tx_buffer(u16 data, void __iomem *base)
> +{
> + writew(data, base + SGMII_ADAPTER_CTRL_REG);
> +}
hmm, is this function really necessary? I think you can use
directly writew or maybe writew_relaxed.
> +
> +static void tse_pcs_reset(void __iomem *base, struct tse_pcs *pcs)
> +{
> + int counter = 0;
> + u16 val;
> +
> + val = readw(base + TSE_PCS_CONTROL_REG);
> + val |= TSE_PCS_SW_RST_MASK;
> + writew(val, base + TSE_PCS_CONTROL_REG);
> +
> + while (counter < TSE_PCS_SW_RESET_TIMEOUT) {
> + val = readw(base + TSE_PCS_CONTROL_REG);
> + val &= TSE_PCS_SW_RST_MASK;
> + if (val == 0)
> + break;
> + counter++;
> + udelay(1);
> + }
> + if (counter >= TSE_PCS_SW_RESET_TIMEOUT)
> + dev_err(pcs->dev, "PCS could not get out of sw reset\n");
> +}
> +
maybe this should return an error to stop the init if reset is NOK.
> +void tse_pcs_init(void __iomem *base, struct tse_pcs *pcs)
> +{
> + writew(0x0001, base + TSE_PCS_IF_MODE_REG);
> +
> + writew(TSE_PCS_SGMII_LINK_TIMER_0, base + TSE_PCS_LINK_TIMER_0_REG);
> + writew(TSE_PCS_SGMII_LINK_TIMER_1, base + TSE_PCS_LINK_TIMER_1_REG);
> +
> + tse_pcs_reset(base, pcs);
> + config_tx_buffer(SGMII_ADAPTER_ENABLE,
> + pcs->sgmii_adapter_base);
> +}
> +
> +static void pcs_link_timer_callback(unsigned long data)
> +{
> + u16 val = 0;
> +
> + struct tse_pcs *pcs = (struct tse_pcs *)data;
> + void __iomem *tse_pcs_base = pcs->tse_pcs_base;
> + void __iomem *sgmii_adapter_base = pcs->sgmii_adapter_base;
> +
> + val = readw(tse_pcs_base + TSE_PCS_STATUS_REG);
> + val &= TSE_PCS_STATUS_LINK_MASK;
> +
> + if (val != 0) {
> + dev_dbg(pcs->dev, "Adapter: Link is established\n");
> + config_tx_buffer(SGMII_ADAPTER_ENABLE, sgmii_adapter_base);
> + } else {
> + mod_timer(&pcs->link_timer, jiffies +
> + msecs_to_jiffies(LINK_TIMER));
> + }
> +}
> +
> +static void auto_nego_timer_callback(unsigned long data)
> +{
> + u16 val = 0;
> + u16 speed = 0;
> + u16 duplex = 0;
> +
> + struct tse_pcs *pcs = (struct tse_pcs *)data;
> + void __iomem *tse_pcs_base = pcs->tse_pcs_base;
> + void __iomem *sgmii_adapter_base = pcs->sgmii_adapter_base;
> +
> + val = readw(tse_pcs_base + TSE_PCS_STATUS_REG);
> + val &= TSE_PCS_STATUS_AN_COMPLETED_MASK;
> +
> + if (val != 0) {
> + dev_dbg(pcs->dev, "Adapter: Auto Negotiation is completed\n");
> + val = readw(tse_pcs_base + TSE_PCS_PARTNER_ABILITY_REG);
> + speed = val & TSE_PCS_PARTNER_SPEED_MASK;
> + duplex = val & TSE_PCS_PARTNER_DUPLEX_MASK;
> +
> + if (speed == TSE_PCS_PARTNER_SPEED_10 &&
> + duplex == TSE_PCS_PARTNER_DUPLEX_FULL)
> + dev_dbg(pcs->dev,
> + "Adapter: Link Partner is Up - 10/Full\n");
> + else if (speed == TSE_PCS_PARTNER_SPEED_100 &&
> + duplex == TSE_PCS_PARTNER_DUPLEX_FULL)
> + dev_dbg(pcs->dev,
> + "Adapter: Link Partner is Up - 100/Full\n");
> + else if (speed == TSE_PCS_PARTNER_SPEED_1000 &&
> + duplex == TSE_PCS_PARTNER_DUPLEX_FULL)
> + dev_dbg(pcs->dev,
> + "Adapter: Link Partner is Up - 1000/Full\n");
> + else if (speed == TSE_PCS_PARTNER_SPEED_10 &&
> + duplex == TSE_PCS_PARTNER_DUPLEX_HALF)
> + dev_err(pcs->dev,
> + "Adapter does not support Half Duplex\n");
> + else if (speed == TSE_PCS_PARTNER_SPEED_100 &&
> + duplex == TSE_PCS_PARTNER_DUPLEX_HALF)
> + dev_err(pcs->dev,
> + "Adapter does not support Half Duplex\n");
> + else if (speed == TSE_PCS_PARTNER_SPEED_1000 &&
> + duplex == TSE_PCS_PARTNER_DUPLEX_HALF)
> + dev_err(pcs->dev,
> + "Adapter does not support Half Duplex\n");
> + else
> + dev_err(pcs->dev,
> + "Adapter: Invalid Partner Speed and Duplex\n");
ANE is completed but speed or duplex is NOK. Any failure to signalling?
I see that you then enable the adpter in any case.
Maybe we could try to restart ANE again or force it (reducing the speed)
I wonder what happens if, for some reason, there is some hw problem. In
that case the timer is always running signalling an invalid Parter
speed. Anyway, this is jus a question... I expect that this error will
always point us to a problem to debug further (if occurs).
> +
> + config_tx_buffer(SGMII_ADAPTER_ENABLE, sgmii_adapter_base);
> + } else {
> + val = readw(tse_pcs_base + TSE_PCS_CONTROL_REG);
> + val |= TSE_PCS_CONTROL_RESTART_AN_MASK;
> + writew(val, tse_pcs_base + TSE_PCS_CONTROL_REG);
> +
> + tse_pcs_reset(tse_pcs_base, pcs);
> + mod_timer(&pcs->an_timer, jiffies +
> + msecs_to_jiffies(AUTONEGO_TIMER));
> + }
> +}
> +
> +void tse_pcs_fix_mac_speed(struct tse_pcs *pcs, struct phy_device *phy_dev,
> + unsigned int speed)
> +{
> + void __iomem *tse_pcs_base = pcs->tse_pcs_base;
> + void __iomem *sgmii_adapter_base = pcs->sgmii_adapter_base;
> + u32 val;
> +
> + config_tx_buffer(SGMII_ADAPTER_DISABLE, sgmii_adapter_base);
> +
> + if (phy_dev->autoneg == AUTONEG_ENABLE) {
> + val = readw(tse_pcs_base + TSE_PCS_CONTROL_REG);
> + val |= TSE_PCS_CONTROL_AN_EN_MASK;
> + writew(val, tse_pcs_base + TSE_PCS_CONTROL_REG);
> +
> + val = readw(tse_pcs_base + TSE_PCS_IF_MODE_REG);
> + val |= TSE_PCS_USE_SGMII_AN_MASK;
> + writew(val, tse_pcs_base + TSE_PCS_IF_MODE_REG);
> +
> + val = readw(tse_pcs_base + TSE_PCS_CONTROL_REG);
> + val |= TSE_PCS_CONTROL_RESTART_AN_MASK;
> + writew(val, tse_pcs_base + TSE_PCS_CONTROL_REG);
> +
> + tse_pcs_reset(tse_pcs_base, pcs);
why do you need to reset here?
> +
> + setup_timer(&pcs->an_timer,
> + auto_nego_timer_callback,
> + (unsigned long)pcs);
> + mod_timer(&pcs->an_timer, jiffies +
> + msecs_to_jiffies(AUTONEGO_TIMER));
> + } else if (phy_dev->autoneg == AUTONEG_DISABLE) {
> + val = readw(tse_pcs_base + TSE_PCS_CONTROL_REG);
> + val &= ~TSE_PCS_CONTROL_AN_EN_MASK;
> + writew(val, tse_pcs_base + TSE_PCS_CONTROL_REG);
> +
> + val = readw(tse_pcs_base + TSE_PCS_IF_MODE_REG);
> + val &= ~TSE_PCS_USE_SGMII_AN_MASK;
> + writew(val, tse_pcs_base + TSE_PCS_IF_MODE_REG);
> +
> + val = readw(tse_pcs_base + TSE_PCS_IF_MODE_REG);
> + val &= ~TSE_PCS_SGMII_SPEED_MASK;
> +
> + switch (speed) {
> + case 1000:
> + val |= TSE_PCS_SGMII_SPEED_1000;
> + break;
> + case 100:
> + val |= TSE_PCS_SGMII_SPEED_100;
> + break;
> + case 10:
> + val |= TSE_PCS_SGMII_SPEED_10;
> + break;
> + default:
> + return;
> + }
> + writew(val, tse_pcs_base + TSE_PCS_IF_MODE_REG);
> +
> + tse_pcs_reset(tse_pcs_base, pcs);
> +
> + setup_timer(&pcs->link_timer,
> + pcs_link_timer_callback,
> + (unsigned long)pcs);
> + mod_timer(&pcs->link_timer, jiffies +
> + msecs_to_jiffies(LINK_TIMER));
I wonder if we can have just one timer to manage ANE and LINK.
> + }
> +}
> diff --git a/drivers/net/ethernet/stmicro/stmmac/tse_pcs.h b/drivers/net/ethernet/stmicro/stmmac/tse_pcs.h
> new file mode 100644
> index 0000000..e3d4511
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/tse_pcs.h
> @@ -0,0 +1,36 @@
> +/* Copyright Altera Corporation (C) 2016. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2,
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Author: Tien Hock Loh <thloh@...era.com>
> + */
> +
> +#ifndef __TSE_PCS_H__
> +#define __TSE_PCS_H__
> +
> +#include <linux/phy.h>
> +#include <linux/timer.h>
> +
> +struct tse_pcs {
> + struct device *dev;
> + void __iomem *tse_pcs_base;
> + void __iomem *sgmii_adapter_base;
> + struct timer_list an_timer;
> + struct timer_list link_timer;
> +};
> +
> +void tse_pcs_init(void __iomem *base, struct tse_pcs *pcs);
> +void tse_pcs_fix_mac_speed(struct tse_pcs *pcs, struct phy_device *phy_dev,
> + unsigned int speed);
> +
> +#endif /* __TSE_PCS_H__ */
>
Powered by blists - more mailing lists