[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1465290954-15852-1-git-send-email-frank.wang@rock-chips.com>
Date: Tue, 7 Jun 2016 17:15:52 +0800
From: Frank Wang <frank.wang@...k-chips.com>
To: heiko@...ech.de, dianders@...omium.org, linux@...ck-us.net,
groeck@...omium.org, jwerner@...omium.org, kishon@...com,
robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-usb@...r.kernel.org, linux-rockchip@...ts.infradead.org,
xzy.xu@...k-chips.com, kever.yang@...k-chips.com,
huangtao@...k-chips.com, william.wu@...k-chips.com,
frank.wang@...k-chips.com
Subject: [PATCH v4 0/2] Add a new Rockchip usb2 phy driver
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.
These series patches add phy-rockchip-inno-usb2.c and the corresponding
documentation.
Changes in v4:
- Used 'phy-supply' instead of 'vbus_*-supply'.
Changes in v3:
- Supplemented some hardware-description into the devicetree bindings.
- Resolved the mapping defect between fixed value in driver and the property
in devicetree.
- Code cleanup.
Changes in v2:
- Specified more hardware-description into the devicetree bindings.
- Optimized some process of driver.
Frank Wang (2):
Documentation: bindings: add DT documentation for Rockchip USB2PHY
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
.../bindings/phy/phy-rockchip-inno-usb2.txt | 62 ++
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-inno-usb2.c | 614 ++++++++++++++++++++
4 files changed, 684 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
--
1.7.9.5
Powered by blists - more mailing lists