| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1465363832-9585-3-git-send-email-ravishankarkm32@gmail.com> Date: Wed, 8 Jun 2016 11:00:30 +0530 From: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@...il.com> To: abbotti@....co.uk, hsweeten@...ionengravers.com, gregkh@...uxfoundation.org Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org, ravishankarkm32@...il.com Subject: [PATCH 3/5] Staging: comedi: das800: fix comment issue This fixes up a WARNING: 'Block comments use a trailing */ on a separate line'found by the checkpatch.pl tool Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@...il.com> --- drivers/staging/comedi/drivers/das800.c | 102 ++++++++++++++++---------------- 1 file changed, 51 insertions(+), 51 deletions(-) diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c index b02f122..0680d87 100644 --- a/drivers/staging/comedi/drivers/das800.c +++ b/drivers/staging/comedi/drivers/das800.c @@ -1,56 +1,56 @@ /* - comedi/drivers/das800.c - Driver for Keitley das800 series boards and compatibles - Copyright (C) 2000 Frank Mori Hess <fmhess@...rs.sourceforge.net> - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 2000 David A. Schleef <ds@...leef.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ + * comedi/drivers/das800.c + * Driver for Keitley das800 series boards and compatibles + * Copyright (C) 2000 Frank Mori Hess <fmhess@...rs.sourceforge.net> + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2000 David A. Schleef <ds@...leef.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ /* -Driver: das800 -Description: Keithley Metrabyte DAS800 (& compatibles) -Author: Frank Mori Hess <fmhess@...rs.sourceforge.net> -Devices: [Keithley Metrabyte] DAS-800 (das-800), DAS-801 (das-801), - DAS-802 (das-802), - [Measurement Computing] CIO-DAS800 (cio-das800), - CIO-DAS801 (cio-das801), CIO-DAS802 (cio-das802), - CIO-DAS802/16 (cio-das802/16) -Status: works, cio-das802/16 untested - email me if you have tested it - -Configuration options: - [0] - I/O port base address - [1] - IRQ (optional, required for timed or externally triggered conversions) - -Notes: - IRQ can be omitted, although the cmd interface will not work without it. - - All entries in the channel/gain list must use the same gain and be - consecutive channels counting upwards in channel number (these are - hardware limitations.) - - I've never tested the gain setting stuff since I only have a - DAS-800 board with fixed gain. - - The cio-das802/16 does not have a fifo-empty status bit! Therefore - only fifo-half-full transfers are possible with this card. - -cmd triggers supported: - start_src: TRIG_NOW | TRIG_EXT - scan_begin_src: TRIG_FOLLOW - scan_end_src: TRIG_COUNT - convert_src: TRIG_TIMER | TRIG_EXT - stop_src: TRIG_NONE | TRIG_COUNT -*/ + * Driver: das800 + * Description: Keithley Metrabyte DAS800 (& compatibles) + * Author: Frank Mori Hess <fmhess@...rs.sourceforge.net> + * Devices: [Keithley Metrabyte] DAS-800 (das-800), DAS-801 (das-801), + * DAS-802 (das-802), + * [Measurement Computing] CIO-DAS800 (cio-das800), + * CIO-DAS801 (cio-das801), CIO-DAS802 (cio-das802), + * CIO-DAS802/16 (cio-das802/16) + * Status: works, cio-das802/16 untested - email me if you have tested it + * + * Configuration options: + * [0] - I/O port base address + * [1] - IRQ (optional, required for timed or externally triggered conversions) + * + * Notes: + * IRQ can be omitted, although the cmd interface will not work without it. + * + * All entries in the channel/gain list must use the same gain and be + * consecutive channels counting upwards in channel number (these are + * hardware limitations.) + * + * I've never tested the gain setting stuff since I only have a + * DAS-800 board with fixed gain. + * + * The cio-das802/16 does not have a fifo-empty status bit! Therefore + * only fifo-half-full transfers are possible with this card. + * + * cmd triggers supported: + * start_src: TRIG_NOW | TRIG_EXT + * scan_begin_src: TRIG_FOLLOW + * scan_end_src: TRIG_COUNT + * convert_src: TRIG_TIMER | TRIG_EXT + * stop_src: TRIG_NONE | TRIG_COUNT + */ #include <linux/module.h> #include <linux/interrupt.h> -- 1.9.1
Powered by blists - more mailing lists