[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v661ERE7zi9uExMtiEgG68owxT6x4jX3nCsVH8BwohJ53A@mail.gmail.com>
Date: Wed, 8 Jun 2016 09:37:30 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Chen-Yu Tsai <wens@...e.org>,
linux-clk <linux-clk@...r.kernel.org>,
Hans de Goede <hdegoede@...hat.com>,
Andre Przywara <andre.przywara@....com>,
Rob Herring <robh+dt@...nel.org>,
Vishnu Patekar <vishnupatekar0510@...il.com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Jean-Francois Moine <moinejf@...e.fr>,
linux-kernel <linux-kernel@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation
On Wed, Jun 8, 2016 at 4:41 AM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> Introduce a new binding with its documentation for the brand new clock
> sub-framework.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> ---
> Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> new file mode 100644
> index 000000000000..2c66046a1342
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -0,0 +1,17 @@
> +Allwinner Clock Control Unit Binding
> +------------------------------------
> +
> +Required properties :
> +- compatible: must contain one of the following compatible:
> + - "allwinner,sun8i-h3-ccu"
> +
> +- reg: Must contain the registers base address and length
> +- clocks: phandle to the oscillators feeding the SPI controller. Two are
SPI? copy paste error?
> + needed:
> + - "hosc": the high frequency oscillator (usually at 24MHz)
> + - "losc": the low frequency oscillator (usually at 32kHz)
> +- clock-names: Must contain the clock names described just above
> +- #clock-cells : must contain 1
> +- #reset-cells : must contain 1
> +
> +Example:
No example? Maybe just remove this section then.
ChenYu
> --
> 2.8.3
>
Powered by blists - more mailing lists