Message-ID: <20160608015631.GE4759@localhost>
Date:	Tue, 7 Jun 2016 20:56:31 -0500
From:	Bjorn Helgaas <helgaas@...nel.org>
To:	Tomasz Nowicki <tn@...ihalf.com>
Cc:	arnd@...db.de, will.deacon@....com, catalin.marinas@....com,
	rafael@...nel.org, hanjun.guo@...aro.org,
	Lorenzo.Pieralisi@....com, okaya@...eaurora.org,
	jchandra@...adcom.com, robert.richter@...iumnetworks.com,
	mw@...ihalf.com, Liviu.Dudau@....com, ddaney@...iumnetworks.com,
	wangyijing@...wei.com, Suravee.Suthikulpanit@....com,
	msalter@...hat.com, linux-pci@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-acpi@...r.kernel.org,
	linux-kernel@...r.kernel.org, linaro-acpi@...ts.linaro.org,
	jcm@...hat.com, andrea.gallo@...aro.org, dhdang@....com,
	jeremy.linton@....com, liudongdong3@...wei.com, cov@...eaurora.org
Subject: Re: [PATCH V8 7/9] acpi: Add generic MCFG table handling

On Mon, May 30, 2016 at 05:14:20PM +0200, Tomasz Nowicki wrote:
> In order to handle PCI config space regions properly in ACPI, new MCFG
> interface is defined which does sanity checks on MCFG table and keeps its
> root pointer. The user is able to lookup MCFG regions based on
> host bridge root structure and domain:bus_start:bus_end touple.
> Use pci_mmcfg_late_init old prototype to avoid another function name.
> 
> Signed-off-by: Tomasz Nowicki <tn@...ihalf.com>
> Signed-off-by: Jayachandran C <jchandra@...adcom.com>
> ---
>  drivers/acpi/Kconfig     |  3 ++
>  drivers/acpi/Makefile    |  1 +
>  drivers/acpi/pci_mcfg.c  | 94 ++++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/pci-acpi.h |  2 ++
>  include/linux/pci.h      |  2 +-
>  5 files changed, 101 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/acpi/pci_mcfg.c
> 
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index b7e2e77..f98c328 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -217,6 +217,9 @@ config ACPI_PROCESSOR_IDLE
>  	bool
>  	select CPU_IDLE
>  
> +config ACPI_MCFG
> +	bool
> +
>  config ACPI_CPPC_LIB
>  	bool
>  	depends on ACPI_PROCESSOR
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 251ce85..632e81f 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
>  acpi-y				+= ec.o
>  acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
>  acpi-y				+= pci_root.o pci_link.o pci_irq.o
> +obj-$(CONFIG_ACPI_MCFG)		+= pci_mcfg.o
>  acpi-y				+= acpi_lpss.o acpi_apd.o
>  acpi-y				+= acpi_platform.o
>  acpi-y				+= acpi_pnp.o
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> new file mode 100644
> index 0000000..1847f74
> --- /dev/null
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (C) 2016 Broadcom
> + *	Author: Jayachandran C <jchandra@...adcom.com>
> + * Copyright (C) 2016 Semihalf
> + * 	Author: Tomasz Nowicki <tn@...ihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2, as
> + * published by the Free Software Foundation (the "GPL").
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License version 2 (GPLv2) for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * version 2 (GPLv2) along with this source code.
> + */
> +
> +#define pr_fmt(fmt) "ACPI: " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/pci-acpi.h>
> +
> +/* Root pointer to the mapped MCFG table */
> +static struct acpi_table_mcfg *mcfg_table;
> +static int mcfg_entries;
> +
> +int pci_mcfg_lookup(struct acpi_pci_root *root)

I think this would be better if we passed in the domain and a pointer
to the bus range resource and returned the ECAM base address.  I don't
think we need to be connected to struct acpi_pci_root.

> +{
> +	struct acpi_mcfg_allocation *mptr, *entry = NULL;
> +	struct resource *bus_res = &root->secondary;
> +	int i;
> +
> +	if (mcfg_table) {
> +		mptr = (struct acpi_mcfg_allocation *) &mcfg_table[1];
> +		for (i = 0; i < mcfg_entries && !entry; i++, mptr++)
> +			if (mptr->pci_segment == root->segment &&
> +			    mptr->start_bus_number == bus_res->start)
> +				entry = mptr;
> +	}
> +
> +	/* not found, use _CBA if available, else error */
> +	if (!entry) {
> +		if (root->mcfg_addr)
> +			return root->mcfg_addr;
> +		pr_err("%04x:%pR MCFG lookup failed\n", root->segment, bus_res);
> +		return -ENOENT;
> +	} else if (root->mcfg_addr && entry->address != root->mcfg_addr) {
> +		pr_warn("%04x:%pR CBA %pa != MCFG %lx, using CBA\n",
> +			root->segment, bus_res, &root->mcfg_addr,
> +			(unsigned long)entry->address);
> +		return 0;
> +	}

I keep looking at this code, trying to find where we "use _CBA", but I
can't find it.  Oh, I see, acpi_pci_root_add() calls
acpi_pci_root_get_mcfg_addr() (which evaluates _CBA), and sets
root->mcfg_addr to the result.

"root->mcfg_addr" is sort of an unfortunate name because "MCFG" is the
ACPI table name, we've used "ECAM" for the memory-mapped config space,
and this address can come from either the MCFG table or the _CBA
method.

In the case where we have both _CBA and an MCFG entry, I think we
should prefer _CBA, and I'm not sure it's even worth warning about it.
So I think you could simplify this function if you made
pci_acpi_setup_ecam_mapping() look like this:

  ... pci_acpi_setup_ecam_mapping(...)
  {
    ...
    if (!root->mcfg_addr)
      root->mcfg_addr = pci_mcfg_lookup(root);

    if (!root->mcfg_addr) {
      dev_err(..., "no ECAM region found\n");
      return -EINVAL;
    }

> +
> +	/* found matching entry, bus range check */
> +	if (entry->end_bus_number != bus_res->end) {
> +		resource_size_t bus_end = min_t(resource_size_t,
> +					entry->end_bus_number, bus_res->end);
> +		pr_warn("%04x:%pR bus end mismatch, using %02lx\n",
> +			root->segment, bus_res, (unsigned long)bus_end);
> +		bus_res->end = bus_end;
> +	}
> +
> +	if (!root->mcfg_addr)
> +		root->mcfg_addr = entry->address;

Please move the assignment to the caller (I think Lorenzo pointed this
out already).

> +	return 0;
> +}
> +
> +static __init int pci_mcfg_parse(struct acpi_table_header *header)
> +{
> +	if (header->length < sizeof(struct acpi_table_mcfg))
> +		return -EINVAL;
> +
> +	mcfg_entries = (header->length - sizeof(struct acpi_table_mcfg)) /
> +					sizeof(struct acpi_mcfg_allocation);
> +	if (mcfg_entries == 0) {
> +		pr_err("MCFG has no entries\n");

Include an address here?  I'm not really sure either of the messages
here is necessary.  Users (callers of pci_mcfg_lookup()) will notice
if we can't find any ECAM space and will probably complain there,
where the message can include more information, e.g., the affected
device.

> +		return -EINVAL;
> +	}
> +
> +	mcfg_table = (struct acpi_table_mcfg *)header;
> +	pr_info("MCFG table detected, %d entries\n", mcfg_entries);
> +	return 0;
> +}
> +
> +/* Interface called by ACPI - parse and save MCFG table */

I think we save a *pointer* to the MCFG table, not the table itself.

And acpi_table_parse() calls early_acpi_os_unmap_memory() immediately
after it calls pci_mcfg_parse(), so I'm doubtful that the pointer
remains valid.

> +void __init pci_mmcfg_late_init(void)
> +{
> +	int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
> +	if (err)
> +		pr_err("Failed to parse MCFG (%d)\n", err);
> +}
> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 89ab057..e0e6dfc 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -24,6 +24,8 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
>  }
>  extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>  
> +extern int pci_mcfg_lookup(struct acpi_pci_root *root);
> +
>  static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
>  {
>  	struct pci_bus *pbus = pdev->bus;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index bba4053..9661c85 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1724,7 +1724,7 @@ void pcibios_free_irq(struct pci_dev *dev);
>  extern struct dev_pm_ops pcibios_pm_ops;
>  #endif
>  
> -#ifdef CONFIG_PCI_MMCONFIG
> +#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
>  void __init pci_mmcfg_early_init(void);
>  void __init pci_mmcfg_late_init(void);
>  #else
> -- 
> 1.9.1
> 

Powered by blists - more mailing lists