lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1465393686-16644-1-git-send-email-k.kozlowski@samsung.com>
Date:	Wed, 08 Jun 2016 15:47:59 +0200
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	MyungJoo Ham <myungjoo.ham@...sung.com>,
	Chanwoo Choi <cw00.choi@...sung.com>,
	Rob Herring <robh+dt@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	Kukjin Kim <kgene@...nel.org>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org
Cc:	rogerq@...com, Peter Chen <peter.chen@...escale.com>,
	"Ivan T. Ivanov" <iivanov@...sol.com>, balbi@...com, kishon@...com,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: [RFC v4 0/7] extcon: usb-gpio: fixes and improvements

Hi,


Some time ago, Robert tried to add VBUS detection to extcon-usb-gpio
driver [1].  There was a discussion about patch #2 ("extcon: usb-gpio:
add support for VBUS detection").

The final conclusion was that Chanwoo will add VBUS/ID notifiers [2].
That unfortunately never happened so this patchset is a follow up.

1. Add VBUS/ID cable state notifiers to extcon, so USB controllers
   could use it.
2. Add VBUS detection to extcon-usb-gpio driver.

Some parts are based on old Robert's work, some are new, some are
reworked.


Best regards,
Krzysztof


[1] http://thread.gmane.org/gmane.linux.kernel/1923192/focus=1923193
[2] http://thread.gmane.org/gmane.linux.kernel/1923192/focus=1941152


Krzysztof Kozlowski (5):
  Revert "extcon: usb-gpio: switch to use pm wakeirq apis"
  extcon: Add raw VBUS and ID cable states
  extcon: usb-gpio: Add support for VBUS detection
  ARM: exynos_defconfig: Enable EXTCON_USB_GPIO for Odroid XU3 USB OTG
  ARM: dts: exynos: Add extcon-usb-gpio node for Odroid XU3

Robert Baldyga (2):
  Documentation: extcon: usb-gpio: update usb-gpio binding description
  extcon: usb-gpio: make debounce value configurable in devicetree

 .../devicetree/bindings/extcon/extcon-usb-gpio.txt |  28 ++++-
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts    |  21 ++++
 arch/arm/boot/dts/exynos5422-odroidxu3.dts         |  21 ++++
 arch/arm/configs/exynos_defconfig                  |   1 +
 drivers/extcon/extcon-usb-gpio.c                   | 138 +++++++++++++++++----
 drivers/extcon/extcon.c                            |   3 +
 include/linux/extcon.h                             |   8 +-
 7 files changed, 190 insertions(+), 30 deletions(-)

-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ