[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <871t46q189.fsf@free-electrons.com>
Date: Thu, 09 Jun 2016 09:18:30 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Stephan Linz <linz@...pro.net>
Cc: linux-leds@...r.kernel.org, linux-ide@...r.kernel.org,
BenoƮt Cousson
<bcousson@...libre.com>, Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@...linux.org.uk>,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 4/7] arm: use the new LED disk activity trigger
Hi Stephan,
On jeu., juin 09 2016, Stephan Linz <linz@...pro.net> wrote:
> - dts: rename 'ide-disk' to 'disk-activity'
> - platform: rename 'ide-disk' to 'disk-activity'
> - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
>
> Signed-off-by: Stephan Linz <linz@...pro.net>
> ---
I don't comment about the change itslef but if the change is OK for the
dt and led maintainer then you will have to split this patch in 3 chunks
(on for each subystem):
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +-
for omap
> arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +-
> arch/arm/boot/dts/kirkwood-topkick.dts | 2 +-
for mvebu
> arch/arm/configs/collie_defconfig | 2 +-
> arch/arm/configs/ixp4xx_defconfig | 2 +-
for pxa
> arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
> arch/arm/mach-omap1/board-osk.c | 2 +-
for omap
> arch/arm/mach-pxa/spitz.c | 2 +-
for pxa
Thanks,
Gregory
> 8 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 81d6c30..c4d04c5 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -86,7 +86,7 @@
> led@3 {
> label = "beagle-x15:usr3";
> gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> default-state = "off";
> };
> };
> diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> index 1f2ca60..2c661ad 100644
> --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
> +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> @@ -26,7 +26,7 @@
> blue-sata {
> label = "ns2:blue:sata";
> gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> };
> };
> };
> diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
> index f5c8c0d..1e9a721 100644
> --- a/arch/arm/boot/dts/kirkwood-topkick.dts
> +++ b/arch/arm/boot/dts/kirkwood-topkick.dts
> @@ -129,7 +129,7 @@
> disk {
> label = "topkick:yellow:disk";
> gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> };
> system2 {
> label = "topkick:red:system";
> diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
> index 6c56ad0..52dbad5 100644
> --- a/arch/arm/configs/collie_defconfig
> +++ b/arch/arm/configs/collie_defconfig
> @@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
> CONFIG_LEDS_LOCOMO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
> # CONFIG_DNOTIFY is not set
> CONFIG_VFAT_FS=y
> CONFIG_TMPFS=y
> diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
> index 24636cf..cf4918a 100644
> --- a/arch/arm/configs/ixp4xx_defconfig
> +++ b/arch/arm/configs/ixp4xx_defconfig
> @@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
> CONFIG_LEDS_GPIO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_ISL1208=y
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index 68cc099..ab47b8e 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
> { .name = "DS2", .active_low = 1,
> .default_trigger = "mmc0", },
> { .name = "DS1", .active_low = 1,
> - .default_trigger = "ide-disk", },
> + .default_trigger = "disk-activity", },
> };
>
> static const struct gpio_led_platform_data evm_led_data = {
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 209aecb..4dfb995 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
> * Also, D9 requires non-battery power.
> */
> { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
> - .default_trigger = "ide-disk", },
> + .default_trigger = "disk-activity", },
> { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
> { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
> .default_trigger = "heartbeat", },
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index bd7cd8b..1080580 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
> },
> {
> .name = "spitz:green:hddactivity",
> - .default_trigger = "ide-disk",
> + .default_trigger = "disk-activity",
> .gpio = SPITZ_GPIO_LED_GREEN,
> },
> };
> --
> 2.8.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Powered by blists - more mailing lists