[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1465465471-28740-14-git-send-email-k.kozlowski@samsung.com>
Date: Thu, 09 Jun 2016 11:44:30 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hans de Goede <hdegoede@...hat.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Tomi Valkeinen <tomi.valkeinen@...com>,
Heiko Stuebner <heiko@...ech.de>, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-usb@...r.kernel.org, linux-fbdev@...r.kernel.org,
hzpeterchen@...il.com
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: [RFC v4 13/14] ARM: dts: exynos: Switch the buck8 to GPIO mode on
Odroid U3
Switch the control of buck8 to GPIO mode. It is faster than I2C/register
mode and it is the easiest way to disable it (regulator state is a
logical OR state of GPIO and register value).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Reviewed-by: Javier Martinez Canillas <javier@....samsung.com>
---
arch/arm/boot/dts/exynos4412-odroidu3.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index d73aa6c58fe3..31cdc036fda4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -74,6 +74,7 @@
regulator-name = "BUCK8_P3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ maxim,ena-gpios = <&gpa1 1 GPIO_ACTIVE_HIGH>;
};
/* VDDQ for MSHC (eMMC card) */
--
1.9.1
Powered by blists - more mailing lists