| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1465465471-28740-2-git-send-email-k.kozlowski@samsung.com>
Date: Thu, 09 Jun 2016 11:44:18 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hans de Goede <hdegoede@...hat.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Tomi Valkeinen <tomi.valkeinen@...com>,
Heiko Stuebner <heiko@...ech.de>, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-usb@...r.kernel.org, linux-fbdev@...r.kernel.org,
hzpeterchen@...il.com
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: [RFC v4 01/14] regulator: of: Add helper for getting all supplies
Few drivers have a need of getting regulator supplies without knowing
their names:
1. The Simple Framebuffer driver works on setup provided by bootloader
(outside of scope of kernel);
2. Generic power sequence driver may be attached to any device node.
Add a Device Tree helper for parsing "-supply" properties and returning
allocated bulk regulator consumers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
---
drivers/regulator/of_regulator.c | 86 ++++++++++++++++++++++++++++++++++
include/linux/regulator/of_regulator.h | 13 +++++
2 files changed, 99 insertions(+)
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index cd828dbf9d52..0d2c8dd0ebc0 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -350,3 +350,89 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
return init_data;
}
+
+/**
+ * devm_of_regulator_all_get - get all regulator consumers
+ *
+ * @dev: Device to supply
+ * @num_consumers Number of consumers registered (only on success)
+ * @consumers: Configuration of consumers; names of supplies and clients
+ * are stored here; allocated only on success (NULL otherwise);
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get all regulator consumers
+ * for given device in one operation. The names of regulator supplies
+ * do not have to be provided. If any of the regulators cannot be
+ * acquired then any regulators that were allocated will be freed
+ * before returning to the caller.
+ */
+int devm_of_regulator_all_get(struct device *dev, unsigned int *num_consumers,
+ struct regulator_bulk_data **consumers)
+{
+ struct device_node *np = dev->of_node;
+ struct regulator_bulk_data *bulk;
+ unsigned int count = 0, i = 0;
+ struct property *prop;
+ const char *p;
+ int ret;
+
+ if (!np) {
+ ret = 0;
+ goto err; /* Not really an error */
+ }
+
+ /* Count the number of regulator supplies */
+ for_each_property_of_node(np, prop) {
+ p = strstr(prop->name, "-supply");
+ if (p && p != prop->name)
+ count++;
+ }
+
+ if (!count) {
+ ret = 0;
+ goto err; /* Not really an error */
+ }
+
+ bulk = devm_kcalloc(dev, count, sizeof(**consumers), GFP_KERNEL);
+ if (!bulk) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* Get all the names for supplies */
+ for_each_property_of_node(np, prop) {
+ char *name;
+ int len;
+
+ p = strstr(prop->name, "-supply");
+ if (!p || p == prop->name)
+ continue;
+
+ len = strlen(prop->name) - strlen("-supply") + 1;
+ name = devm_kzalloc(dev, len, GFP_KERNEL);
+ if (!name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ strlcpy(name, prop->name, len);
+ bulk[i++].supply = name;
+ }
+
+ ret = devm_regulator_bulk_get(dev, i, bulk);
+ if (ret)
+ goto err;
+
+ *consumers = bulk;
+ *num_consumers = i;
+
+ return 0;
+
+err:
+ *num_consumers = 0;
+ *consumers = NULL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_of_regulator_all_get);
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
index 763953f7e3b8..93a3b7fe92e8 100644
--- a/include/linux/regulator/of_regulator.h
+++ b/include/linux/regulator/of_regulator.h
@@ -7,6 +7,7 @@
#define __LINUX_OF_REG_H
struct regulator_desc;
+struct regulator_bulk_data;
struct of_regulator_match {
const char *name;
@@ -24,6 +25,9 @@ extern struct regulator_init_data
extern int of_regulator_match(struct device *dev, struct device_node *node,
struct of_regulator_match *matches,
unsigned int num_matches);
+extern int devm_of_regulator_all_get(struct device *dev,
+ unsigned int *num_consumers,
+ struct regulator_bulk_data **consumers);
#else
static inline struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
@@ -40,6 +44,15 @@ static inline int of_regulator_match(struct device *dev,
{
return 0;
}
+static inline int devm_of_regulator_all_get(struct device *dev,
+ unsigned int *num_consumers,
+ struct regulator_bulk_data **consumers)
+{
+ *num_consumers = 0;
+ *consumers = NULL;
+
+ return 0;
+}
#endif /* CONFIG_OF */
#endif /* __LINUX_OF_REG_H */
--
1.9.1
Powered by blists - more mailing lists