linux-kernel - [PATCH 1/4] drivers-on-gpio.txt: Fix paths to GPIO driver source files

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 10 Jun 2016 16:46:33 +0930
From:	Andrew Jeffery <andrew@...id.au>
To:	Jonathan Corbet <corbet@....net>
Cc:	Linus Walleij <linus.walleij@...aro.org>,
	linux-doc@...r.kernel.org, linux-gpio@...r.kernel.org,
	linux-kernel@...r.kernel.org, trivial@...nel.org,
	Andrew Jeffery <andrew@...id.au>
Subject: [PATCH 1/4] drivers-on-gpio.txt: Fix paths to GPIO driver source files

Signed-off-by: Andrew Jeffery <andrew@...id.au>
---
 Documentation/gpio/drivers-on-gpio.txt | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt
index 14bf95a13bae..306513251713 100644
--- a/Documentation/gpio/drivers-on-gpio.txt
+++ b/Documentation/gpio/drivers-on-gpio.txt
@@ -37,15 +37,16 @@ hardware descriptions such as device tree or ACPI:
   external connector status, such as a headset line for an audio driver or an
   HDMI connector. It will provide a better userspace sysfs interface than GPIO.
 
-- restart-gpio: drivers/power/gpio-restart.c is used to restart/reboot the
-  system by pulling a GPIO line and will register a restart handler so
+- restart-gpio: drivers/power/reset/gpio-restart.c is used to restart/reboot
+  the system by pulling a GPIO line and will register a restart handler so
   userspace can issue the right system call to restart the system.
 
-- poweroff-gpio: drivers/power/gpio-poweroff.c is used to power the system down
-  by pulling a GPIO line and will register a pm_power_off() callback so that
-  userspace can issue the right system call to power down the system.
+- poweroff-gpio: drivers/power/reset/gpio-poweroff.c is used to power the
+  system down by pulling a GPIO line and will register a pm_power_off()
+  callback so that userspace can issue the right system call to power down the
+  system.
 
-- gpio-gate-clock: drivers/clk/clk-gpio-gate.c is used to control a gated clock
+- gpio-gate-clock: drivers/clk/clk-gpio.c is used to control a gated clock
   (off/on) that uses a GPIO, and integrated with the clock subsystem.
 
 - i2c-gpio: drivers/i2c/busses/i2c-gpio.c is used to drive an I2C bus
-- 
2.7.4