[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1465521892-31420-3-git-send-email-ttnguyen@apm.com>
Date: Thu, 9 Jun 2016 18:24:50 -0700
From: Tai Nguyen <ttnguyen@....com>
To: mark.rutland@....com, will.deacon@....com, catalin.marinas@....com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, patches@....com,
Tai Nguyen <ttnguyen@....com>
Subject: [PATCH v3 2/4] Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
Signed-off-by: Tai Nguyen <ttnguyen@....com>
---
.../devicetree/bindings/perf/apm-xgene-pmu.txt | 112 +++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
new file mode 100644
index 0000000..afb11cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC PMU bindings
+
+This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
+The following PMU devices are supported:
+
+ L3C - L3 cache controller
+ IOB - IO bridge
+ MCB - Memory controller bridge
+ MC - Memory controller
+
+The following section describes the SoC PMU DT node binding.
+
+Required properties:
+- compatible : Shall be "apm,xgene-pmu" for revision 1 or
+ "apm,xgene-pmu-v2" for revision 2.
+- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
+- reg : First resource shall be the CPU bus PMU resource.
+- interrupts : Interrupt-specifier for PMU IRQ.
+
+Required properties for L3C subnode:
+- compatible : Shall be "apm,xgene-pmu-l3c".
+- reg : First resource shall be the L3C PMU resource.
+
+Required properties for IOB subnode:
+- compatible : Shall be "apm,xgene-pmu-iob".
+- reg : First resource shall be the IOB PMU resource.
+
+Required properties for MCB subnode:
+- compatible : Shall be "apm,xgene-pmu-mcb".
+- reg : First resource shall be the MCB PMU resource.
+- enable-bit-index : The bit indicates if the according MCB is enabled.
+
+Required properties for MC subnode:
+- compatible : Shall be "apm,xgene-pmu-mc".
+- reg : First resource shall be the MC PMU resource.
+- enable-bit-index : The bit indicates if the according MC is enabled.
+
+Example:
+ csw: csw@...00000 {
+ compatible = "apm,xgene-csw", "syscon";
+ reg = <0x0 0x7e200000 0x0 0x1000>;
+ };
+
+ mcba: mcba@...00000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e700000 0x0 0x1000>;
+ };
+
+ mcbb: mcbb@...20000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e720000 0x0 0x1000>;
+ };
+
+ pmu: pmu@...10000 {
+ compatible = "apm,xgene-pmu-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ reg = <0x0 0x78810000 0x0 0x1000>;
+ interrupts = <0x0 0x22 0x4>;
+
+ pmul3c@...10000 {
+ compatible = "apm,xgene-pmu-l3c";
+ reg = <0x0 0x7e610000 0x0 0x1000>;
+ };
+
+ pmuiob@...40000 {
+ compatible = "apm,xgene-pmu-iob";
+ reg = <0x0 0x7e940000 0x0 0x1000>;
+ };
+
+ pmucmcb@...10000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e710000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmcb@...30000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e730000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@...10000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e810000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmc@...50000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e850000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@...90000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e890000 0x0 0x1000>;
+ enable-bit-index = <2>;
+ };
+
+ pmucmc@...d0000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e8d0000 0x0 0x1000>;
+ enable-bit-index = <3>;
+ };
+ };
--
1.9.1
Powered by blists - more mailing lists