lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160610162528.GI19309@localhost>
Date:	Fri, 10 Jun 2016 11:25:28 -0500
From:	Bjorn Helgaas <helgaas@...nel.org>
To:	Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Cc:	iommu@...ts.linux-foundation.org,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Robin Murphy <robin.murphy@....com>,
	Tomasz Nowicki <tn@...ihalf.com>,
	Joerg Roedel <joro@...tes.org>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Will Deacon <will.deacon@....com>,
	Marc Zyngier <marc.zyngier@....com>,
	Hanjun Guo <hanjun.guo@...aro.org>,
	Jon Masters <jcm@...hat.com>,
	Sinan Kaya <okaya@...eaurora.org>, linux-acpi@...r.kernel.org,
	linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [RFC PATCH v2 12/15] drivers: acpi: implement acpi_dma_configure

On Tue, Jun 07, 2016 at 02:31:07PM +0100, Lorenzo Pieralisi wrote:
> On DT based systems, the of_dma_configure() API implements DMA configuration
> for a given device. On ACPI systems an API equivalent to of_dma_configure()
> is missing which implies that it is currently not possible to set-up DMA
> operations for devices through the ACPI generic kernel layer.
> 
> This patch fills the gap by introducing acpi_dma_configure/deconfigure()
> calls that for now are just wrappers around arch_setup_dma_ops() and
> arch_teardown_dma_ops() and also updates ACPI and PCI core code to use
> the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions.
> 
> The DMA range size passed to arch_setup_dma_ops() is sized according
> to the device coherent_dma_mask (starting at address 0x0), mirroring the
> DT probing path behaviour when a dma-ranges property is not provided
> for the device being probed; this changes the current arch_setup_dma_ops()
> call parameters in the ACPI probing case, but since arch_setup_dma_ops()
> is a NOP on all architectures but ARM/ARM64 this patch does not change
> the current kernel behaviour on them.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
> Cc: Bjorn Helgaas <bhelgaas@...gle.com>
> Cc: Robin Murphy <robin.murphy@....com>
> Cc: Tomasz Nowicki <tn@...ihalf.com>
> Cc: Joerg Roedel <joro@...tes.org>
> Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>

Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>

I assume this will be merged by somebody else along with the rest
of the series.

> ---
>  drivers/acpi/glue.c     |  4 ++--
>  drivers/acpi/scan.c     | 24 ++++++++++++++++++++++++
>  drivers/pci/probe.c     |  3 +--
>  include/acpi/acpi_bus.h |  2 ++
>  include/linux/acpi.h    |  5 +++++
>  5 files changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
> index 5ea5dc2..f8d6564 100644
> --- a/drivers/acpi/glue.c
> +++ b/drivers/acpi/glue.c
> @@ -227,8 +227,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
>  
>  	attr = acpi_get_dma_attr(acpi_dev);
>  	if (attr != DEV_DMA_NOT_SUPPORTED)
> -		arch_setup_dma_ops(dev, 0, 0, NULL,
> -				   attr == DEV_DMA_COHERENT);
> +		acpi_dma_configure(dev, attr);
>  
>  	acpi_physnode_link_name(physical_node_name, node_id);
>  	retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
> @@ -251,6 +250,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
>  	return 0;
>  
>   err:
> +	acpi_dma_deconfigure(dev);
>  	ACPI_COMPANION_SET(dev, NULL);
>  	put_device(dev);
>  	put_device(&acpi_dev->dev);
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 5f28cf7..b4b9064 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1358,6 +1358,30 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>  		return DEV_DMA_NON_COHERENT;
>  }
>  
> +/**
> + * acpi_dma_configure - Set-up DMA configuration for the device.
> + * @dev: The pointer to the device
> + * @attr: device dma attributes
> + */
> +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
> +{
> +	/*
> +	 * Assume dma valid range starts at 0 and covers the whole
> +	 * coherent_dma_mask.
> +	 */
> +	arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL,
> +			   attr == DEV_DMA_COHERENT);
> +}
> +
> +/**
> + * acpi_dma_deconfigure - Tear-down DMA configuration for the device.
> + * @dev: The pointer to the device
> + */
> +void acpi_dma_deconfigure(struct device *dev)
> +{
> +	arch_teardown_dma_ops(dev);
> +}
> +
>  static void acpi_init_coherency(struct acpi_device *adev)
>  {
>  	unsigned long long cca = 0;
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 8e3ef72..01dd369 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1725,8 +1725,7 @@ static void pci_dma_configure(struct pci_dev *dev)
>  		if (attr == DEV_DMA_NOT_SUPPORTED)
>  			dev_warn(&dev->dev, "DMA not supported.\n");
>  		else
> -			arch_setup_dma_ops(&dev->dev, 0, 0, NULL,
> -					   attr == DEV_DMA_COHERENT);
> +			acpi_dma_configure(&dev->dev, attr);
>  	}
>  
>  	pci_put_host_bridge_device(bridge);
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 788c6c35..8b5039a 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -566,6 +566,8 @@ struct acpi_pci_root {
>  
>  bool acpi_dma_supported(struct acpi_device *adev);
>  enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
> +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
> +void acpi_dma_deconfigure(struct device *dev);
>  
>  struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
>  					   u64 address, bool check_children);
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 288fac5..135a452 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -676,6 +676,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>  	return DEV_DMA_NOT_SUPPORTED;
>  }
>  
> +static inline void acpi_dma_configure(struct device *dev,
> +				      enum dev_dma_attr attr) { }
> +
> +static inline void acpi_dma_deconfigure(struct device *dev) { }
> +
>  #define ACPI_PTR(_ptr)	(NULL)
>  
>  #endif	/* !CONFIG_ACPI */
> -- 
> 2.6.4
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ