| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1465596231-21766-18-git-send-email-alexandre.belloni@free-electrons.com>
Date: Sat, 11 Jun 2016 00:03:20 +0200
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: Boris Brezillon <boris.brezillon@...e-electrons.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Gregory Hermant <gregory.hermant@...ao-systems.com>
Subject: [PATCH 17/48] ARM: dts: at91: calao: use TCB0 as clocksource
Use tcb0 as the clocksource like previously selected in at91_dt_defconfig.
Cc: Gregory Hermant <gregory.hermant@...ao-systems.com>
[tested on usb_a9g20 and usb_a9263]
Tested-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
arch/arm/boot/dts/at91-qil_a9260.dts | 12 ++++++++++++
arch/arm/boot/dts/tny_a9260_common.dtsi | 12 ++++++++++++
arch/arm/boot/dts/tny_a9263.dts | 12 ++++++++++++
arch/arm/boot/dts/usb_a9260_common.dtsi | 12 ++++++++++++
arch/arm/boot/dts/usb_a9263.dts | 12 ++++++++++++
5 files changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 4f2eebf4a560..bbc1f667cc65 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -40,6 +40,18 @@
ahb {
apb {
+ tcb0: timer@...a0000 {
+ timer@0 {
+ compatible = "atmel,tcb-clksrc";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-clkevt";
+ reg = <2>;
+ };
+ };
+
usb1: gadget@...a4000 {
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index ce7138c3af1b..0b2902d7ccd3 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -36,6 +36,18 @@
ahb {
apb {
+ tcb0: timer@...a0000 {
+ timer@0 {
+ compatible = "atmel,tcb-clksrc";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-clkevt";
+ reg = <2>;
+ };
+ };
+
dbgu: serial@...ff200 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 3043296345b7..32ee65a9f99f 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -45,6 +45,18 @@
status = "okay";
};
+ tcb0: timer@...7c000 {
+ timer@0 {
+ compatible = "atmel,tcb-clksrc";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-clkevt";
+ reg = <2>;
+ };
+ };
+
usb1: gadget@...78000 {
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 9beea8976584..369a26bc5edc 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -32,6 +32,18 @@
status = "okay";
};
+ tcb0: timer@...a0000 {
+ timer@0 {
+ compatible = "atmel,tcb-clksrc";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-clkevt";
+ reg = <2>;
+ };
+ };
+
macb0: ethernet@...c4000 {
phy-mode = "rmii";
status = "okay";
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 8cc6edb29694..49a25c26b8e4 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -45,6 +45,18 @@
status = "okay";
};
+ tcb0: timer@...7c000 {
+ timer@0 {
+ compatible = "atmel,tcb-clksrc";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-clkevt";
+ reg = <2>;
+ };
+ };
+
macb0: ethernet@...bc000 {
phy-mode = "rmii";
status = "okay";
--
2.8.1
Powered by blists - more mailing lists