| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1465647219-7798-4-git-send-email-srinivas.pandruvada@linux.intel.com>
Date: Sat, 11 Jun 2016 05:13:36 -0700
From: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
To: jikos@...nel.org, jic23@...nel.org, benjamin.tissoires@...hat.com
Cc: linux-input@...r.kernel.org, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org, chaya.golan@...el.com,
daniel.drubin@...el.com, A.Bhattacharya@....ac.be,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Subject: [PATCH 3/6] hid: intel-ish-hid: ipc layer
From: Daniel Drubin <daniel.drubin@...el.com>
This layer is responsible for
- Enumerating over PCI bus
- Inform FW about host readiness
- Provide HW interface to transport layer for control and messages
- Interrupt handling and routing
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
---
drivers/hid/intel-ish-hid/Kconfig | 5 +
drivers/hid/intel-ish-hid/Makefile | 6 +
drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h | 220 +++++++++
drivers/hid/intel-ish-hid/ipc/hw-ish.h | 70 +++
drivers/hid/intel-ish-hid/ipc/ipc.c | 720 ++++++++++++++++++++++++++++
drivers/hid/intel-ish-hid/ipc/pci-ish.c | 305 ++++++++++++
drivers/hid/intel-ish-hid/ipc/utils.h | 64 +++
include/trace/events/intel_ish.h | 30 ++
8 files changed, 1420 insertions(+)
create mode 100644 drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
create mode 100644 drivers/hid/intel-ish-hid/ipc/hw-ish.h
create mode 100644 drivers/hid/intel-ish-hid/ipc/ipc.c
create mode 100644 drivers/hid/intel-ish-hid/ipc/pci-ish.c
create mode 100644 drivers/hid/intel-ish-hid/ipc/utils.h
create mode 100644 include/trace/events/intel_ish.h
diff --git a/drivers/hid/intel-ish-hid/Kconfig b/drivers/hid/intel-ish-hid/Kconfig
index 8914f3b..88967a1 100644
--- a/drivers/hid/intel-ish-hid/Kconfig
+++ b/drivers/hid/intel-ish-hid/Kconfig
@@ -5,10 +5,15 @@ config INTEL_ISH_HID_TRANSPORT
bool
default n
+config INTEL_ISH_HID_IPC
+ bool
+ default n
+
config INTEL_ISH_HID
bool "Intel Integrated Sensor Hub"
default n
select INTEL_ISH_HID_TRANSPORT
+ select INTEL_ISH_HID_IPC
help
The Integrated Sensor Hub (ISH) enables the ability to offload
sensor polling and algorithm processing to a dedicated low power
diff --git a/drivers/hid/intel-ish-hid/Makefile b/drivers/hid/intel-ish-hid/Makefile
index a5eaa6e..2c83cb9 100644
--- a/drivers/hid/intel-ish-hid/Makefile
+++ b/drivers/hid/intel-ish-hid/Makefile
@@ -8,3 +8,9 @@ intel-ishtp-objs += ishtp/hbm.o
intel-ishtp-objs += ishtp/client.o
intel-ishtp-objs += ishtp/bus.o
intel-ishtp-objs += ishtp/dma-if.o
+
+obj-$(CONFIG_INTEL_ISH_HID_IPC) += intel-ish-ipc.o
+intel-ish-ipc-objs := ipc/ipc.o
+intel-ish-ipc-objs += ipc/pci-ish.o
+
+ccflags-y += -Idrivers/hid/intel-ish-hid/ishtp
diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
new file mode 100644
index 0000000..ab68afc
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
@@ -0,0 +1,220 @@
+/*
+ * ISH registers definitions
+ *
+ * Copyright (c) 2012-2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ISHTP_ISH_REGS_H_
+#define _ISHTP_ISH_REGS_H_
+
+
+/*** IPC PCI Offsets and sizes ***/
+/* ISH IPC Base Address */
+#define IPC_REG_BASE 0x0000
+/* Peripheral Interrupt Status Register */
+#define IPC_REG_PISR_CHV_AB (IPC_REG_BASE + 0x00)
+/* Peripheral Interrupt Mask Register */
+#define IPC_REG_PIMR_CHV_AB (IPC_REG_BASE + 0x04)
+/*BXT, CHV_K0*/
+/*Peripheral Interrupt Status Register */
+#define IPC_REG_PISR_BXT (IPC_REG_BASE + 0x0C)
+/*Peripheral Interrupt Mask Register */
+#define IPC_REG_PIMR_BXT (IPC_REG_BASE + 0x08)
+/***********************************/
+/* ISH Host Firmware status Register */
+#define IPC_REG_ISH_HOST_FWSTS (IPC_REG_BASE + 0x34)
+/* Host Communication Register */
+#define IPC_REG_HOST_COMM (IPC_REG_BASE + 0x38)
+/* Reset register */
+#define IPC_REG_ISH_RST (IPC_REG_BASE + 0x44)
+
+/* Inbound doorbell register Host to ISH */
+#define IPC_REG_HOST2ISH_DRBL (IPC_REG_BASE + 0x48)
+/* Outbound doorbell register ISH to Host */
+#define IPC_REG_ISH2HOST_DRBL (IPC_REG_BASE + 0x54)
+/* ISH to HOST message registers */
+#define IPC_REG_ISH2HOST_MSG (IPC_REG_BASE + 0x60)
+/* HOST to ISH message registers */
+#define IPC_REG_HOST2ISH_MSG (IPC_REG_BASE + 0xE0)
+/* REMAP2 to enable DMA (D3 RCR) */
+#define IPC_REG_ISH_RMP2 (IPC_REG_BASE + 0x368)
+
+#define IPC_REG_MAX (IPC_REG_BASE + 0x400)
+
+/*** register bits - HISR ***/
+/* bit corresponds HOST2ISH interrupt in PISR and PIMR registers */
+#define IPC_INT_HOST2ISH_BIT (1<<0)
+/***********************************/
+/*CHV_A0, CHV_B0*/
+/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
+#define IPC_INT_ISH2HOST_BIT_CHV_AB (1<<3)
+/*BXT, CHV_K0*/
+/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
+#define IPC_INT_ISH2HOST_BIT_BXT (1<<0)
+/***********************************/
+
+/* bit corresponds ISH2HOST busy clear interrupt in PIMR register */
+#define IPC_INT_ISH2HOST_CLR_MASK_BIT (1<<11)
+
+/* offset of ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
+#define IPC_INT_ISH2HOST_CLR_OFFS (0)
+
+/* bit corresponds ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
+#define IPC_INT_ISH2HOST_CLR_BIT (1<<IPC_INT_ISH2HOST_CLR_OFFS)
+
+/* bit corresponds busy bit in doorbell registers */
+#define IPC_DRBL_BUSY_OFFS (31)
+#define IPC_DRBL_BUSY_BIT (1<<IPC_DRBL_BUSY_OFFS)
+
+#define IPC_HOST_OWNS_MSG_OFFS (30)
+
+/*
+ * A0: bit means that host owns MSGnn registers and is reading them.
+ * ISH FW may not write to them
+ */
+#define IPC_HOST_OWNS_MSG_BIT (1<<IPC_HOST_OWNS_MSG_OFFS)
+
+/*
+ * Host status bits (HOSTCOMM)
+ */
+/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
+#define IPC_HOSTCOMM_READY_OFFS (7)
+#define IPC_HOSTCOMM_READY_BIT (1<<IPC_HOSTCOMM_READY_OFFS)
+
+/***********************************/
+/*CHV_A0, CHV_B0*/
+#define IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB (31)
+#define IPC_HOSTCOMM_INT_EN_BIT_CHV_AB \
+ (1<<IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB)
+/*BXT, CHV_K0*/
+#define IPC_PIMR_INT_EN_OFFS_BXT (0)
+#define IPC_PIMR_INT_EN_BIT_BXT (1<<IPC_PIMR_INT_EN_OFFS_BXT)
+
+#define IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT (8)
+#define IPC_HOST2ISH_BUSYCLEAR_MASK_BIT \
+ (1<<IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT)
+/***********************************/
+/*
+ * both Host and ISH have ILUP at bit 0
+ * bit corresponds host ready bit in both status registers
+ */
+#define IPC_ILUP_OFFS (0)
+#define IPC_ILUP_BIT (1<<IPC_ILUP_OFFS)
+
+/*
+ * FW status bits (relevant)
+ */
+#define IPC_FWSTS_ILUP 0x1
+#define IPC_FWSTS_ISHTP_UP (1<<1)
+#define IPC_FWSTS_DMA0 (1<<16)
+#define IPC_FWSTS_DMA1 (1<<17)
+#define IPC_FWSTS_DMA2 (1<<18)
+#define IPC_FWSTS_DMA3 (1<<19)
+
+#define IPC_ISH_IN_DMA \
+ (IPC_FWSTS_DMA0 | IPC_FWSTS_DMA1 | IPC_FWSTS_DMA2 | IPC_FWSTS_DMA3)
+
+/* bit corresponds host ready bit in ISH FW Status Register */
+#define IPC_ISH_ISHTP_READY_OFFS (1)
+#define IPC_ISH_ISHTP_READY_BIT (1<<IPC_ISH_ISHTP_READY_OFFS)
+
+#define IPC_RMP2_DMA_ENABLED 0x1 /* Value to enable DMA, per D3 RCR */
+
+#define IPC_MSG_MAX_SIZE 0x80
+
+
+#define IPC_HEADER_LENGTH_MASK 0x03FF
+#define IPC_HEADER_PROTOCOL_MASK 0x0F
+#define IPC_HEADER_MNG_CMD_MASK 0x0F
+
+#define IPC_HEADER_LENGTH_OFFSET 0
+#define IPC_HEADER_PROTOCOL_OFFSET 10
+#define IPC_HEADER_MNG_CMD_OFFSET 16
+
+#define IPC_HEADER_GET_LENGTH(drbl_reg) \
+ (((drbl_reg) >> IPC_HEADER_LENGTH_OFFSET)&IPC_HEADER_LENGTH_MASK)
+#define IPC_HEADER_GET_PROTOCOL(drbl_reg) \
+ (((drbl_reg) >> IPC_HEADER_PROTOCOL_OFFSET)&IPC_HEADER_PROTOCOL_MASK)
+#define IPC_HEADER_GET_MNG_CMD(drbl_reg) \
+ (((drbl_reg) >> IPC_HEADER_MNG_CMD_OFFSET)&IPC_HEADER_MNG_CMD_MASK)
+
+#define IPC_IS_BUSY(drbl_reg) \
+ (((drbl_reg)&IPC_DRBL_BUSY_BIT) == ((uint32_t)IPC_DRBL_BUSY_BIT))
+
+/***********************************/
+/*CHV_A0, CHV_B0*/
+#define IPC_INT_FROM_ISH_TO_HOST_CHV_AB(drbl_reg) \
+ (((drbl_reg)&IPC_INT_ISH2HOST_BIT_CHV_AB) == \
+ ((u32)IPC_INT_ISH2HOST_BIT_CHV_AB))
+/*BXT, CHV_K0*/
+#define IPC_INT_FROM_ISH_TO_HOST_BXT(drbl_reg) \
+ (((drbl_reg)&IPC_INT_ISH2HOST_BIT_BXT) == \
+ ((u32)IPC_INT_ISH2HOST_BIT_BXT))
+/***********************************/
+
+#define IPC_BUILD_HEADER(length, protocol, busy) \
+ (((busy)<<IPC_DRBL_BUSY_OFFS) | \
+ ((protocol) << IPC_HEADER_PROTOCOL_OFFSET) | \
+ ((length)<<IPC_HEADER_LENGTH_OFFSET))
+
+#define IPC_BUILD_MNG_MSG(cmd, length) \
+ (((1)<<IPC_DRBL_BUSY_OFFS)| \
+ ((IPC_PROTOCOL_MNG)<<IPC_HEADER_PROTOCOL_OFFSET)| \
+ ((cmd)<<IPC_HEADER_MNG_CMD_OFFSET)| \
+ ((length)<<IPC_HEADER_LENGTH_OFFSET))
+
+
+#define IPC_SET_HOST_READY(host_status) \
+ ((host_status) |= (IPC_HOSTCOMM_READY_BIT))
+
+#define IPC_SET_HOST_ILUP(host_status) \
+ ((host_status) |= (IPC_ILUP_BIT))
+
+#define IPC_CLEAR_HOST_READY(host_status) \
+ ((host_status) ^= (IPC_HOSTCOMM_READY_BIT))
+
+#define IPC_CLEAR_HOST_ILUP(host_status) \
+ ((host_status) ^= (IPC_ILUP_BIT))
+
+/* todo - temp until PIMR HW ready */
+#define IPC_HOST_BUSY_READING_OFFS 6
+
+/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
+#define IPC_HOST_BUSY_READING_BIT (1<<IPC_HOST_BUSY_READING_OFFS)
+
+#define IPC_SET_HOST_BUSY_READING(host_status) \
+ ((host_status) |= (IPC_HOST_BUSY_READING_BIT))
+
+#define IPC_CLEAR_HOST_BUSY_READING(host_status)\
+ ((host_status) ^= (IPC_HOST_BUSY_READING_BIT))
+
+
+#define IPC_IS_ISH_ISHTP_READY(ish_status) \
+ (((ish_status) & IPC_ISH_ISHTP_READY_BIT) == \
+ ((uint32_t)IPC_ISH_ISHTP_READY_BIT))
+
+#define IPC_IS_ISH_ILUP(ish_status) \
+ (((ish_status) & IPC_ILUP_BIT) == ((uint32_t)IPC_ILUP_BIT))
+
+
+#define IPC_PROTOCOL_ISHTP 1
+#define IPC_PROTOCOL_MNG 3
+
+#define MNG_RX_CMPL_ENABLE 0
+#define MNG_RX_CMPL_DISABLE 1
+#define MNG_RX_CMPL_INDICATION 2
+#define MNG_RESET_NOTIFY 3
+#define MNG_RESET_NOTIFY_ACK 4
+#define MNG_SYNC_FW_CLOCK 5
+#define MNG_ILLEGAL_CMD 0xFF
+
+#endif /* _ISHTP_ISH_REGS_H_ */
diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish.h b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
new file mode 100644
index 0000000..02f68ad
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
@@ -0,0 +1,70 @@
+/*
+ * H/W layer of ISHTP provider device (ISH)
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ISHTP_HW_ISH_H_
+#define _ISHTP_HW_ISH_H_
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include "hw-ish-regs.h"
+#include "ishtp-dev.h"
+
+#define CHV_DEVICE_ID 0x22D8
+#define BXT_Ax_DEVICE_ID 0x0AA2
+#define BXT_Bx_DEVICE_ID 0x1AA2
+#define BXTP_Ax_DEVICE_ID 0x5AA2
+#define SPT_Ax_DEVICE_ID 0x9D35
+
+#define REVISION_ID_CHT_A0 0x6
+#define REVISION_ID_CHT_Ax_SI 0x0
+#define REVISION_ID_CHT_Bx_SI 0x10
+#define REVISION_ID_CHT_Kx_SI 0x20
+#define REVISION_ID_CHT_Dx_SI 0x30
+#define REVISION_ID_CHT_B0 0xB0
+#define REVISION_ID_SI_MASK 0x70
+
+struct ipc_rst_payload_type {
+ uint16_t reset_id;
+ uint16_t reserved;
+};
+
+struct time_sync_format {
+ uint8_t ts1_source;
+ uint8_t ts2_source;
+ uint16_t reserved;
+} __packed;
+
+struct ipc_time_update_msg {
+ uint64_t primary_host_time;
+ struct time_sync_format sync_info;
+ uint64_t secondary_host_time;
+} __packed;
+
+enum {
+ HOST_UTC_TIME_USEC = 0,
+ HOST_SYSTEM_TIME_USEC = 1
+};
+
+struct ish_hw {
+ void __iomem *mem_addr;
+};
+
+#define to_ish_hw(dev) (struct ish_hw *)((dev)->hw)
+
+irqreturn_t ish_irq_handler(int irq, void *dev_id);
+struct ishtp_device *ish_dev_init(struct pci_dev *pdev);
+int ish_hw_start(struct ishtp_device *dev);
+
+#endif /* _ISHTP_HW_ISH_H_ */
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
new file mode 100644
index 0000000..dd5df4b
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -0,0 +1,720 @@
+/*
+ * H/W layer of ISHTP provider device (ISH)
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include "client.h"
+#include "hw-ish.h"
+#include "utils.h"
+#include "hbm.h"
+
+/* For FW reset flow */
+static struct work_struct fw_reset_work;
+static struct ishtp_device *ishtp_dev;
+
+/* ish_reg_read - reads 32bit register */
+static inline uint32_t ish_reg_read(const struct ishtp_device *dev,
+ unsigned long offset)
+{
+ struct ish_hw *hw = to_ish_hw(dev);
+
+ return readl(hw->mem_addr + offset);
+}
+
+/* ish_reg_write - writes 32bit register */
+static inline void ish_reg_write(struct ishtp_device *dev,
+ unsigned long offset,
+ uint32_t value)
+{
+ struct ish_hw *hw = to_ish_hw(dev);
+
+ writel(value, hw->mem_addr + offset);
+}
+
+static inline uint32_t _ish_read_fw_sts_reg(struct ishtp_device *dev)
+{
+ return ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+}
+
+bool check_generated_interrupt(struct ishtp_device *dev)
+{
+ bool interrupt_generated = true;
+ uint32_t pisr_val = 0;
+
+ if (dev->pdev->device == CHV_DEVICE_ID) {
+ pisr_val = ish_reg_read(dev, IPC_REG_PISR_CHV_AB);
+ interrupt_generated =
+ IPC_INT_FROM_ISH_TO_HOST_CHV_AB(pisr_val);
+ } else {
+ pisr_val = ish_reg_read(dev, IPC_REG_PISR_BXT);
+ interrupt_generated = IPC_INT_FROM_ISH_TO_HOST_BXT(pisr_val);
+ }
+
+ return interrupt_generated;
+}
+
+/* ish_is_input_ready - check if ISH FW is ready for receiving data */
+static bool ish_is_input_ready(struct ishtp_device *dev)
+{
+ uint32_t doorbell_val;
+
+ doorbell_val = ish_reg_read(dev, IPC_REG_HOST2ISH_DRBL);
+ return !IPC_IS_BUSY(doorbell_val);
+}
+
+/* set_host_ready - set host ready indication to FW */
+void set_host_ready(struct ishtp_device *dev)
+{
+ if (dev->pdev->device == CHV_DEVICE_ID) {
+ if (dev->pdev->revision == REVISION_ID_CHT_A0 ||
+ (dev->pdev->revision & REVISION_ID_SI_MASK) ==
+ REVISION_ID_CHT_Ax_SI)
+ ish_reg_write(dev, IPC_REG_HOST_COMM, 0x81);
+ else if (dev->pdev->revision == REVISION_ID_CHT_B0 ||
+ (dev->pdev->revision & REVISION_ID_SI_MASK) ==
+ REVISION_ID_CHT_Bx_SI ||
+ (dev->pdev->revision & REVISION_ID_SI_MASK) ==
+ REVISION_ID_CHT_Kx_SI ||
+ (dev->pdev->revision & REVISION_ID_SI_MASK) ==
+ REVISION_ID_CHT_Dx_SI) {
+ uint32_t host_comm_val;
+
+ host_comm_val = ish_reg_read(dev, IPC_REG_HOST_COMM);
+ host_comm_val |= IPC_HOSTCOMM_INT_EN_BIT_CHV_AB | 0x81;
+ ish_reg_write(dev, IPC_REG_HOST_COMM, host_comm_val);
+ }
+ } else {
+ uint32_t host_pimr_val;
+
+ host_pimr_val = ish_reg_read(dev, IPC_REG_PIMR_BXT);
+ host_pimr_val |= IPC_PIMR_INT_EN_BIT_BXT;
+ /*
+ * disable interrupt generated instead of
+ * RX_complete_msg
+ */
+ host_pimr_val &= ~IPC_HOST2ISH_BUSYCLEAR_MASK_BIT;
+
+ ish_reg_write(dev, IPC_REG_PIMR_BXT, host_pimr_val);
+ }
+}
+
+/* ishtp_fw_is_ready - check if the hw is ready */
+static bool ishtp_fw_is_ready(struct ishtp_device *dev)
+{
+ uint32_t ish_status = _ish_read_fw_sts_reg(dev);
+
+ return IPC_IS_ISH_ILUP(ish_status) &&
+ IPC_IS_ISH_ISHTP_READY(ish_status);
+}
+
+/* Indicate to FW that the host is ready */
+static void ish_set_host_rdy(struct ishtp_device *dev)
+{
+ uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
+
+ IPC_SET_HOST_READY(host_status);
+ ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
+}
+
+void ish_clr_host_rdy(struct ishtp_device *dev)
+{
+ uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
+
+ IPC_CLEAR_HOST_READY(host_status);
+ ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
+}
+
+/* _ish_read_hdr - reads hdr of 32 bit length. */
+static uint32_t _ishtp_read_hdr(const struct ishtp_device *dev)
+{
+ return ish_reg_read(dev, IPC_REG_ISH2HOST_MSG);
+}
+
+/* ish_read - reads a message from ishtp device. */
+static int _ishtp_read(struct ishtp_device *dev, unsigned char *buffer,
+ unsigned long buffer_length)
+{
+ uint32_t i;
+ uint32_t *r_buf = (uint32_t *)buffer;
+ uint32_t msg_offs;
+
+ msg_offs = IPC_REG_ISH2HOST_MSG + sizeof(struct ishtp_msg_hdr);
+ for (i = 0; i < buffer_length; i += sizeof(uint32_t))
+ *r_buf++ = ish_reg_read(dev, msg_offs + i);
+
+ return 0;
+}
+
+/**
+ * write_ipc_from_queue() - try to write ipc msg from Tx queue to device
+ * @dev: ishtp device pointer
+ *
+ * Check if DRBL is cleared. if it is - write the first IPC msg, then call
+ * the callback function (unless it's NULL)
+ */
+int write_ipc_from_queue(struct ishtp_device *dev)
+{
+ struct wr_msg_ctl_info *ipc_link;
+ unsigned long length;
+ unsigned long rem;
+ unsigned long flags;
+ uint32_t doorbell_val;
+ uint32_t *r_buf;
+ uint32_t reg_addr;
+ int i;
+ void (*ipc_send_compl)(void *);
+ void *ipc_send_compl_prm;
+ static int out_ipc_locked;
+ unsigned long out_ipc_flags;
+
+ if (dev->dev_state == ISHTP_DEV_DISABLED)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->out_ipc_spinlock, out_ipc_flags);
+ if (out_ipc_locked) {
+ spin_unlock_irqrestore(&dev->out_ipc_spinlock, out_ipc_flags);
+ return -EBUSY;
+ }
+ out_ipc_locked = 1;
+ if (!ish_is_input_ready(dev)) {
+ out_ipc_locked = 0;
+ spin_unlock_irqrestore(&dev->out_ipc_spinlock, out_ipc_flags);
+ return -EBUSY;
+ }
+ spin_unlock_irqrestore(&dev->out_ipc_spinlock, out_ipc_flags);
+
+ spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
+ /*
+ * if tx send list is empty - return 0;
+ * may happen, as RX_COMPLETE handler doesn't check list emptiness.
+ */
+ if (list_empty(&dev->wr_processing_list_head.link)) {
+ spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+ out_ipc_locked = 0;
+ return 0;
+ }
+
+ ipc_link = list_entry(dev->wr_processing_list_head.link.next,
+ struct wr_msg_ctl_info, link);
+ /* first 4 bytes of the data is the doorbell value (IPC header) */
+ length = ipc_link->length - sizeof(uint32_t);
+ doorbell_val = *(uint32_t *)ipc_link->inline_data;
+ r_buf = (uint32_t *)(ipc_link->inline_data + sizeof(uint32_t));
+
+ /* If sending MNG_SYNC_FW_CLOCK, update clock again */
+ if (IPC_HEADER_GET_PROTOCOL(doorbell_val) == IPC_PROTOCOL_MNG &&
+ IPC_HEADER_GET_MNG_CMD(doorbell_val) == MNG_SYNC_FW_CLOCK) {
+ struct timespec ts_system;
+ struct timeval tv_utc;
+ uint64_t usec_system, usec_utc;
+ struct ipc_time_update_msg time_update;
+ struct time_sync_format ts_format;
+
+ get_monotonic_boottime(&ts_system);
+ do_gettimeofday(&tv_utc);
+ usec_system = (timespec_to_ns(&ts_system)) / NSEC_PER_USEC;
+ usec_utc = (uint64_t)tv_utc.tv_sec * 1000000 +
+ ((uint32_t)tv_utc.tv_usec);
+ ts_format.ts1_source = HOST_SYSTEM_TIME_USEC;
+ ts_format.ts2_source = HOST_UTC_TIME_USEC;
+
+ time_update.primary_host_time = usec_system;
+ time_update.secondary_host_time = usec_utc;
+ time_update.sync_info = ts_format;
+
+ memcpy(r_buf, &time_update,
+ sizeof(struct ipc_time_update_msg));
+ }
+
+ for (i = 0, reg_addr = IPC_REG_HOST2ISH_MSG; i < length >> 2; i++,
+ reg_addr += 4)
+ ish_reg_write(dev, reg_addr, r_buf[i]);
+
+ rem = length & 0x3;
+ if (rem > 0) {
+ uint32_t reg = 0;
+
+ memcpy(®, &r_buf[length >> 2], rem);
+ ish_reg_write(dev, reg_addr, reg);
+ }
+ /* Flush writes to msg registers and doorbell */
+ ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+ /* Update IPC counters */
+ ++dev->ipc_tx_cnt;
+ dev->ipc_tx_bytes_cnt += IPC_HEADER_GET_LENGTH(doorbell_val);
+
+ ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, doorbell_val);
+ out_ipc_locked = 0;
+
+ ipc_send_compl = ipc_link->ipc_send_compl;
+ ipc_send_compl_prm = ipc_link->ipc_send_compl_prm;
+ list_del_init(&ipc_link->link);
+ list_add_tail(&ipc_link->link, &dev->wr_free_list_head.link);
+ spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+
+ /*
+ * callback will be called out of spinlock,
+ * after ipc_link returned to free list
+ */
+ if (ipc_send_compl)
+ ipc_send_compl(ipc_send_compl_prm);
+
+ return 0;
+}
+
+/**
+ * write_ipc_to_queue() - write ipc msg to Tx queue
+ * @dev: ishtp device instance
+ * @ipc_send_compl: Send complete callback
+ * @ipc_send_compl_prm: Parameter to send in complete callback
+ * @msg: Pointer to message
+ * @length: Length of message
+ *
+ * Recived msg with IPC (and upper protocol) header and add it to the device
+ * Tx-to-write list then try to send the first IPC waiting msg
+ * (if DRBL is cleared)
+ * This function returns negative value for failure (means free list
+ * is empty, or msg too long) and 0 for success.
+ */
+static int write_ipc_to_queue(struct ishtp_device *dev,
+ void (*ipc_send_compl)(void *), void *ipc_send_compl_prm,
+ unsigned char *msg, int length)
+{
+ struct wr_msg_ctl_info *ipc_link;
+ unsigned long flags;
+
+ if (length > IPC_FULL_MSG_SIZE)
+ return -EMSGSIZE;
+
+ spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
+ if (list_empty(&dev->wr_free_list_head.link)) {
+ spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+ return -ENOMEM;
+ }
+ ipc_link = list_entry(dev->wr_free_list_head.link.next,
+ struct wr_msg_ctl_info, link);
+ list_del_init(&ipc_link->link);
+
+ ipc_link->ipc_send_compl = ipc_send_compl;
+ ipc_link->ipc_send_compl_prm = ipc_send_compl_prm;
+ ipc_link->length = length;
+ memcpy(ipc_link->inline_data, msg, length);
+
+ list_add_tail(&ipc_link->link, &dev->wr_processing_list_head.link);
+ spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+
+ write_ipc_from_queue(dev);
+
+ return 0;
+}
+
+/* Send a bus management message */
+static int ipc_send_mng_msg(struct ishtp_device *dev, uint32_t msg_code,
+ void *msg, size_t size)
+{
+ unsigned char ipc_msg[IPC_FULL_MSG_SIZE];
+ uint32_t drbl_val = IPC_BUILD_MNG_MSG(msg_code, size);
+
+ memcpy(ipc_msg, &drbl_val, sizeof(uint32_t));
+ memcpy(ipc_msg + sizeof(uint32_t), msg, size);
+ return write_ipc_to_queue(dev, NULL, NULL, ipc_msg,
+ sizeof(uint32_t) + size);
+}
+
+static int ish_fw_reset_handler(struct ishtp_device *dev)
+{
+ uint32_t reset_id;
+ unsigned long flags;
+ struct wr_msg_ctl_info *processing, *next;
+
+ /* Read reset ID */
+ reset_id = ish_reg_read(dev, IPC_REG_ISH2HOST_MSG) & 0xFFFF;
+
+ /* Clear IPC output queue */
+ spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
+ list_for_each_entry_safe(processing, next,
+ &dev->wr_processing_list_head.link, link) {
+ list_del(&processing->link);
+ list_add_tail(&processing->link, &dev->wr_free_list_head.link);
+ }
+ spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+
+ /* ISHTP notification in IPC_RESET */
+ ishtp_reset_handler(dev);
+
+ if (!ish_is_input_ready(dev))
+ timed_wait_for_timeout(WAIT_FOR_SEND_SLICE,
+ ish_is_input_ready(dev), (2 * HZ));
+
+ /* ISH FW is dead */
+ if (!ish_is_input_ready(dev))
+ return -EPIPE;
+ /*
+ * Set HOST2ISH.ILUP. Apparently we need this BEFORE sending
+ * RESET_NOTIFY_ACK - FW will be checking for it
+ */
+ ish_set_host_rdy(dev);
+ /* Send RESET_NOTIFY_ACK (with reset_id) */
+ ipc_send_mng_msg(dev, MNG_RESET_NOTIFY_ACK, &reset_id,
+ sizeof(uint32_t));
+
+ /* Wait for ISH FW'es ILUP and ISHTP_READY */
+ timed_wait_for_timeout(WAIT_FOR_SEND_SLICE, ishtp_fw_is_ready(dev),
+ (2 * HZ));
+ if (!ishtp_fw_is_ready(dev)) {
+ /* ISH FW is dead */
+ uint32_t ish_status;
+
+ ish_status = _ish_read_fw_sts_reg(dev);
+ dev_err(dev->devc,
+ "[ishtp-ish]: completed reset, ISH is dead "
+ "(FWSTS = %08X)\n",
+ ish_status);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void fw_reset_work_fn(struct work_struct *unused)
+{
+ int rv;
+
+ rv = ish_fw_reset_handler(ishtp_dev);
+ if (!rv) {
+ /* ISH is ILUP & ISHTP-ready. Restart ISHTP */
+ schedule_timeout(HZ / 3);
+ ishtp_dev->recvd_hw_ready = 1;
+ wake_up_interruptible(&ishtp_dev->wait_hw_ready);
+
+ /* ISHTP notification in IPC_RESET sequence completion */
+ ishtp_reset_compl_handler(ishtp_dev);
+ } else
+ dev_err(ishtp_dev->devc, "[ishtp-ish]: FW reset failed (%d)\n",
+ rv);
+}
+
+static void _ish_sync_fw_clock(struct ishtp_device *dev)
+{
+ static unsigned long prev_sync;
+ struct timespec ts;
+ uint64_t usec;
+
+ if (prev_sync && jiffies - prev_sync < 20 * HZ)
+ return;
+
+ prev_sync = jiffies;
+ get_monotonic_boottime(&ts);
+ usec = (timespec_to_ns(&ts)) / NSEC_PER_USEC;
+ ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &usec, sizeof(uint64_t));
+}
+
+/*
+ * recv_ipc() - Receive and process IPC management messages
+ * @dev: ishtp device instance
+ * @doorbell_val: doorbell value
+ *
+ * This function runs in ISR context.
+ * NOTE: Any other mng command than reset_notify and reset_notify_ack
+ * won't wake BH handler
+ */
+static void recv_ipc(struct ishtp_device *dev, uint32_t doorbell_val)
+{
+ uint32_t mng_cmd;
+
+ mng_cmd = IPC_HEADER_GET_MNG_CMD(doorbell_val);
+
+ switch (mng_cmd) {
+ default:
+ break;
+
+ case MNG_RX_CMPL_INDICATION:
+ if (dev->suspend_flag) {
+ dev->suspend_flag = 0;
+ wake_up_interruptible(&dev->suspend_wait);
+ }
+ if (dev->resume_flag) {
+ dev->resume_flag = 0;
+ wake_up_interruptible(&dev->resume_wait);
+ }
+
+ write_ipc_from_queue(dev);
+ break;
+
+ case MNG_RESET_NOTIFY:
+ if (!ishtp_dev) {
+ ishtp_dev = dev;
+ INIT_WORK(&fw_reset_work, fw_reset_work_fn);
+ }
+ schedule_work(&fw_reset_work);
+ break;
+
+ case MNG_RESET_NOTIFY_ACK:
+ dev->recvd_hw_ready = 1;
+ wake_up_interruptible(&dev->wait_hw_ready);
+ break;
+ }
+}
+
+/* ish_irq_handler - ISR of the ISHTP device */
+irqreturn_t ish_irq_handler(int irq, void *dev_id)
+{
+ struct ishtp_device *dev = dev_id;
+ uint32_t doorbell_val;
+ bool interrupt_generated;
+
+ /* Check that it's interrupt from ISH (may be shared) */
+ interrupt_generated = check_generated_interrupt(dev);
+
+ if (!interrupt_generated)
+ return IRQ_NONE;
+
+ doorbell_val = ish_reg_read(dev, IPC_REG_ISH2HOST_DRBL);
+ if (!IPC_IS_BUSY(doorbell_val))
+ return IRQ_HANDLED;
+
+ if (dev->dev_state == ISHTP_DEV_DISABLED)
+ return IRQ_HANDLED;
+
+ /* Sanity check: IPC dgram length in header */
+ if (IPC_HEADER_GET_LENGTH(doorbell_val) > IPC_PAYLOAD_SIZE) {
+ dev_err(dev->devc,
+ "IPC hdr - bad length: %u; dropped\n",
+ (unsigned int)IPC_HEADER_GET_LENGTH(doorbell_val));
+ goto eoi;
+ }
+
+ switch (IPC_HEADER_GET_PROTOCOL(doorbell_val)) {
+ default:
+ break;
+ case IPC_PROTOCOL_MNG:
+ recv_ipc(dev, doorbell_val);
+ break;
+ case IPC_PROTOCOL_ISHTP:
+ ishtp_recv(dev);
+ break;
+ }
+
+eoi:
+ /* Update IPC counters */
+ ++dev->ipc_rx_cnt;
+ dev->ipc_rx_bytes_cnt += IPC_HEADER_GET_LENGTH(doorbell_val);
+
+ ish_reg_write(dev, IPC_REG_ISH2HOST_DRBL, 0);
+ /* Flush write to doorbell */
+ ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+ return IRQ_HANDLED;
+}
+
+static int _ish_hw_reset(struct ishtp_device *dev)
+{
+ struct pci_dev *pdev = dev->pdev;
+ int rv;
+ unsigned int dma_delay;
+ uint16_t csr;
+
+ if (!pdev)
+ return -ENODEV;
+
+ rv = pci_reset_function(pdev);
+ if (!rv)
+ dev->dev_state = ISHTP_DEV_RESETTING;
+
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, "Can't reset - no PM caps\n");
+ return -EINVAL;
+ }
+
+ /* Now trigger reset to FW */
+ ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
+
+ for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
+ _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
+ dma_delay += 5)
+ mdelay(5);
+
+ if (dma_delay >= MAX_DMA_DELAY) {
+ dev_err(&pdev->dev,
+ "Can't reset - stuck with DMA in-progress\n");
+ return -EBUSY;
+ }
+
+ pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &csr);
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D3hot;
+ pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
+
+ mdelay(pdev->d3_delay);
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D0;
+ pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
+
+ ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
+
+ /*
+ * Send 0 IPC message so that ISH FW wakes up if it was already
+ * asleep
+ */
+ ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
+
+ /* Flush writes to doorbell and REMAP2 */
+ ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+ return 0;
+}
+
+/* _ish_ipc_reset - resets host and fw IPC and upper layers. */
+static int _ish_ipc_reset(struct ishtp_device *dev)
+{
+ struct ipc_rst_payload_type ipc_mng_msg;
+ int rv = 0;
+
+ ipc_mng_msg.reset_id = 1;
+ ipc_mng_msg.reserved = 0;
+
+ set_host_ready(dev);
+
+ /* Clear the incoming doorbell */
+ ish_reg_write(dev, IPC_REG_ISH2HOST_DRBL, 0);
+ /* Flush write to doorbell */
+ ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+ dev->recvd_hw_ready = 0;
+
+ /* send message */
+ rv = ipc_send_mng_msg(dev, MNG_RESET_NOTIFY, &ipc_mng_msg,
+ sizeof(struct ipc_rst_payload_type));
+ if (rv) {
+ dev_err(dev->devc, "Failed to send IPC MNG_RESET_NOTIFY\n");
+ return rv;
+ }
+
+ wait_event_interruptible_timeout(dev->wait_hw_ready,
+ dev->recvd_hw_ready, 2 * HZ);
+ if (!dev->recvd_hw_ready) {
+ dev_err(dev->devc, "Timed out waiting for HW ready\n");
+ rv = -ENODEV;
+ }
+
+ return rv;
+}
+
+int ish_hw_start(struct ishtp_device *dev)
+{
+ ish_set_host_rdy(dev);
+ /* After that we can enable ISH DMA operation */
+ ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
+
+ /*
+ * Send 0 IPC message so that ISH FW wakes up if it was already
+ * asleep
+ */
+ ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
+ /* Flush write to doorbell */
+ ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+ set_host_ready(dev);
+
+ /* wait for FW-initiated reset flow */
+ if (!dev->recvd_hw_ready)
+ wait_event_interruptible_timeout(dev->wait_hw_ready,
+ dev->recvd_hw_ready,
+ 10 * HZ);
+
+ if (!dev->recvd_hw_ready) {
+ dev_err(dev->devc,
+ "[ishtp-ish]: Timed out waiting for "
+ "FW-initiated reset\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static uint32_t ish_ipc_get_header(struct ishtp_device *dev, int length,
+ int busy)
+{
+ uint32_t drbl_val;
+
+ drbl_val = IPC_BUILD_HEADER(length, IPC_PROTOCOL_ISHTP, busy);
+
+ return drbl_val;
+}
+
+static const struct ishtp_hw_ops ish_hw_ops = {
+ .hw_reset = _ish_hw_reset,
+ .ipc_reset = _ish_ipc_reset,
+ .ipc_get_header = ish_ipc_get_header,
+ .ishtp_read = _ishtp_read,
+ .write = write_ipc_to_queue,
+ .get_fw_status = _ish_read_fw_sts_reg,
+ .sync_fw_clock = _ish_sync_fw_clock,
+ .ishtp_read_hdr = _ishtp_read_hdr
+};
+
+struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
+{
+ struct ishtp_device *dev;
+ int i;
+
+ dev = kzalloc(sizeof(struct ishtp_device) + sizeof(struct ish_hw),
+ GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ ishtp_device_init(dev);
+
+ init_waitqueue_head(&dev->wait_hw_ready);
+
+ spin_lock_init(&dev->wr_processing_spinlock);
+ spin_lock_init(&dev->out_ipc_spinlock);
+
+ /* Init IPC processing and free lists */
+ INIT_LIST_HEAD(&dev->wr_processing_list_head.link);
+ INIT_LIST_HEAD(&dev->wr_free_list_head.link);
+ for (i = 0; i < IPC_TX_FIFO_SIZE; ++i) {
+ struct wr_msg_ctl_info *tx_buf;
+
+ tx_buf = kzalloc(sizeof(struct wr_msg_ctl_info), GFP_KERNEL);
+ if (!tx_buf) {
+ /*
+ * IPC buffers may be limited or not available
+ * at all - although this shouldn't happen
+ */
+ dev_err(dev->devc,
+ "[ishtp-ish]: failure in Tx FIFO "
+ "allocations (%d)\n", i);
+ break;
+ }
+ list_add_tail(&tx_buf->link, &dev->wr_free_list_head.link);
+ }
+
+ dev->ops = &ish_hw_ops;
+ dev->devc = &pdev->dev;
+ dev->mtu = IPC_PAYLOAD_SIZE - sizeof(struct ishtp_msg_hdr);
+ return dev;
+}
+
+void ishtp_device_disable(struct ishtp_device *dev)
+{
+ dev->dev_state = ISHTP_DEV_DISABLED;
+ ish_clr_host_rdy(dev);
+ kfree(dev->fw_clients);
+}
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
new file mode 100644
index 0000000..e737992
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -0,0 +1,305 @@
+/*
+ * PCI glue for ISHTP provider device (ISH) driver
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/miscdevice.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/intel_ish.h>
+#include "ishtp-dev.h"
+#include "hw-ish.h"
+
+static const struct pci_device_id ish_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, CHV_DEVICE_ID)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Ax_DEVICE_ID)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Bx_DEVICE_ID)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXTP_Ax_DEVICE_ID)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)},
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
+
+/**
+ * ish_event_tracer() - Callback function to dump trace messages
+ *
+ * @dev: ishtp device
+ * @format: printf style format
+ *
+ * Callback to direct log messages to Linux trace buffers
+ */
+static void ish_event_tracer(struct ishtp_device *dev, char *format, ...)
+{
+ if (trace_ishtp_dump_enabled()) {
+ va_list args;
+ char tmp_buf[100];
+
+ va_start(args, format);
+ vsnprintf(tmp_buf, sizeof(tmp_buf), format, args);
+ va_end(args);
+
+ trace_ishtp_dump(tmp_buf);
+ }
+}
+
+/**
+ * ish_init() - Init function
+ *
+ * @dev: ishtp device
+ *
+ * This function initialize wait queues for suspend/resume and call
+ * calls hadware initialization function. This will initiate
+ * startup sequence
+ */
+static int ish_init(struct ishtp_device *dev)
+{
+ int ret;
+
+ dev_set_drvdata(dev->devc, dev);
+
+ init_waitqueue_head(&dev->suspend_wait);
+ init_waitqueue_head(&dev->resume_wait);
+
+ /* Register ishtp bus */
+ ret = ishtp_cl_bus_init();
+ if (ret) {
+ dev_err(dev->devc, "ISH: Init hw failed.\n");
+ return ret;
+ }
+
+ /* Set the state of ISH HW to start */
+ ret = ish_hw_start(dev);
+ if (ret) {
+ dev_err(dev->devc, "ISH: Init hw failed.\n");
+ goto bus_unreg;
+ }
+
+ /* Start the inter process communication to ISH processor */
+ ret = ishtp_start(dev);
+ if (ret) {
+ dev_err(dev->devc, "ISHTP: Protocol init failed.\n");
+ goto bus_unreg;
+ }
+
+ return 0;
+
+bus_unreg:
+ ishtp_cl_bus_exit();
+
+ return ret;
+}
+
+/**
+ * ish_probe() - PCI driver probe callback
+ *
+ * @pdev: pci device
+ * @ent: pci device id
+ *
+ * Initialize PCI function, setup interrupt and call for ISH initialization
+ */
+static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct ishtp_device *dev;
+ struct ish_hw *hw;
+ int ret;
+
+ /* enable pci dev */
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "ISH: Failed to enable PCI device\n");
+ return ret;
+ }
+
+ /* set PCI host mastering */
+ pci_set_master(pdev);
+
+ /* pci request regions for ISH driver */
+ ret = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (ret) {
+ dev_err(&pdev->dev, "ISH: Failed to get PCI regions\n");
+ goto disable_device;
+ }
+
+ /* allocates and initializes the ISH dev structure */
+ dev = ish_dev_init(pdev);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto release_regions;
+ }
+ hw = to_ish_hw(dev);
+ dev->print_log = ish_event_tracer;
+
+ /* mapping IO device memory */
+ hw->mem_addr = pci_iomap(pdev, 0, 0);
+ if (!hw->mem_addr) {
+ dev_err(&pdev->dev, "ISH: mapping I/O range failure\n");
+ ret = -ENOMEM;
+ goto free_device;
+ }
+
+ dev->pdev = pdev;
+
+ /* request and enable interrupt */
+ ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND,
+ KBUILD_MODNAME, dev);
+ if (ret) {
+ dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n",
+ pdev->irq);
+ goto free_device;
+ }
+
+ ret = ish_init(dev);
+ if (ret)
+ goto free_device;
+
+ return 0;
+
+free_device:
+ pci_iounmap(pdev, hw->mem_addr);
+ kfree(dev);
+release_regions:
+ pci_release_regions(pdev);
+disable_device:
+ pci_disable_device(pdev);
+ dev_err(&pdev->dev, "ISH: PCI driver initialization failed.\n");
+
+ return ret;
+}
+
+static struct device *ish_resume_device;
+
+/**
+ * ish_resume_handler() - Work function to complete resume
+ *
+ * @work: work struct
+ *
+ * The resume work function to complete resume function asynchronously.
+ * There are two types of platforms, one where ISH is not powered off,
+ * in that case a simple resume message is enough, others we need
+ * a reset sequence.
+ */
+static void ish_resume_handler(struct work_struct *work)
+{
+ struct pci_dev *pdev = to_pci_dev(ish_resume_device);
+ struct ishtp_device *dev = pci_get_drvdata(pdev);
+ int ret;
+
+ ishtp_send_resume(dev);
+
+ /* 50 ms to get resume response */
+ if (dev->resume_flag)
+ ret = wait_event_interruptible_timeout(dev->resume_wait,
+ !dev->resume_flag,
+ msecs_to_jiffies(50));
+
+ if (dev->resume_flag) {
+ ish_hw_reset(dev);
+ ish_ipc_reset(dev);
+ }
+}
+
+/**
+ * ish_suspend() - ISH suspend callback
+ *
+ * @device: device pointer
+ *
+ * ISH suspend callback
+ */
+static int ish_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct ishtp_device *dev = pci_get_drvdata(pdev);
+
+ enable_irq_wake(pdev->irq);
+ /*
+ * If previous suspend hasn't been asnwered then ISH is likely dead,
+ * don't attempt nested notification
+ */
+ if (dev->suspend_flag)
+ return 0;
+
+ dev->resume_flag = 0;
+ dev->suspend_flag = 1;
+ ishtp_send_suspend(dev);
+
+ /* 25 ms should be enough for live ISH to flush all IPC buf */
+ if (dev->suspend_flag)
+ wait_event_interruptible_timeout(dev->suspend_wait,
+ !dev->suspend_flag,
+ msecs_to_jiffies(25));
+
+ return 0;
+}
+
+static DECLARE_WORK(resume_work, ish_resume_handler);
+/**
+ * ish_resume() - ISH resume callback
+ *
+ * @device: device pointer
+ *
+ * ISH resume callback
+ */
+static int ish_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct ishtp_device *dev = pci_get_drvdata(pdev);
+
+ ish_resume_device = device;
+ dev->resume_flag = 1;
+
+ disable_irq_wake(pdev->irq);
+ schedule_work(&resume_work);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops ish_pm_ops = {
+ .suspend = ish_suspend,
+ .resume = ish_resume,
+};
+#define ISHTP_ISH_PM_OPS (&ish_pm_ops)
+#else
+#define ISHTP_ISH_PM_OPS NULL
+#endif
+
+static struct pci_driver ish_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ish_pci_tbl,
+ .probe = ish_probe,
+ .driver.pm = ISHTP_ISH_PM_OPS,
+};
+
+static int __init ish_driver_init(void)
+{
+ return pci_register_driver(&ish_driver);
+}
+device_initcall(ish_driver_init);
+
+/* Primary author */
+MODULE_AUTHOR("Daniel Drubin <daniel.drubin@...el.com>");
+/* Adoption to upstream Linux kernel */
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>");
+
+MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/intel-ish-hid/ipc/utils.h b/drivers/hid/intel-ish-hid/ipc/utils.h
new file mode 100644
index 0000000..5a82123
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/utils.h
@@ -0,0 +1,64 @@
+/*
+ * Utility macros of ISH
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#ifndef UTILS__H
+#define UTILS__H
+
+#define WAIT_FOR_SEND_SLICE (HZ / 10)
+#define WAIT_FOR_CONNECT_SLICE (HZ / 10)
+
+/*
+ * Waits for specified event when a thread that triggers event can't signal
+ * Also, waits *at_least* `timeinc` after condition is satisfied
+ */
+#define timed_wait_for(timeinc, condition) \
+ do { \
+ int completed = 0; \
+ do { \
+ unsigned long j; \
+ int done = 0; \
+ \
+ completed = (condition); \
+ for (j = jiffies, done = 0; !done; ) { \
+ schedule_timeout(timeinc); \
+ if (time_is_before_eq_jiffies(j + timeinc)) \
+ done = 1; \
+ } \
+ } while (!(completed)); \
+ } while (0)
+
+
+/*
+ * Waits for specified event when a thread that triggers event
+ * can't signal with timeout (use whenever we may hang)
+ */
+#define timed_wait_for_timeout(timeinc, condition, timeout) \
+ do { \
+ int t = timeout; \
+ do { \
+ unsigned long j; \
+ int done = 0; \
+ \
+ for (j = jiffies, done = 0; !done; ) { \
+ schedule_timeout(timeinc); \
+ if (time_is_before_eq_jiffies(j + timeinc)) \
+ done = 1; \
+ } \
+ t -= timeinc; \
+ if (t <= 0) \
+ break; \
+ } while (!(condition)); \
+ } while (0)
+
+#endif /* UTILS__H */
diff --git a/include/trace/events/intel_ish.h b/include/trace/events/intel_ish.h
new file mode 100644
index 0000000..92f7d5b
--- /dev/null
+++ b/include/trace/events/intel_ish.h
@@ -0,0 +1,30 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM intel_ish
+
+#if !defined(_TRACE_INTEL_ISH_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_INTEL_ISH_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(ishtp_dump,
+
+ TP_PROTO(const char *message),
+
+ TP_ARGS(message),
+
+ TP_STRUCT__entry(
+ __string(message, message)
+ ),
+
+ TP_fast_assign(
+ __assign_str(message, message);
+ ),
+
+ TP_printk("%s", __get_str(message))
+);
+
+
+#endif /* _TRACE_INTEL_ISH_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--
2.5.5
Powered by blists - more mailing lists