| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1465859076-4868-11-git-send-email-dianders@chromium.org>
Date: Mon, 13 Jun 2016 16:04:34 -0700
From: Douglas Anderson <dianders@...omium.org>
To: ulf.hansson@...aro.org, kishon@...com,
Heiko Stuebner <heiko@...ech.de>, robh+dt@...nel.org
Cc: shawn.lin@...k-chips.com, xzy.xu@...k-chips.com,
briannorris@...omium.org, adrian.hunter@...el.com,
linux-rockchip@...ts.infradead.org, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org,
Douglas Anderson <dianders@...omium.org>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v2 10/11] phy: rockchip-emmc: Set phyctrl_frqsel based on card clock
The "phyctrl_frqsel" is described in the Arasan datasheet [1] as "the
frequency range of DLL operation". Although the Rockchip variant of
this PHY has different ranges than the reference Arasan PHY it appears
as if the functionality is similar. We should set this phyctrl field
properly.
Note: as per Rockchip engineers, apparently the "phyctrl_frqsel" is
actually only useful in HS200 / HS400 modes even though the DLL itself
it used for some purposes in all modes. See the discussion in the
earlier change in this series: ("mmc: sdhci-of-arasan: Always power the
PHY off/on when clock changes"). In any case, it shouldn't hurt to set
this always.
Note that this change should allow boards to run at HS200 / HS400 speed
modes while running at 100 MHz or 150 MHz. In fact, running HS400 at
150 MHz (giving 300 MB/s) is the main motivation of this series, since
performance is still good but signal integrity problems are less
prevelant at 150 MHz.
[1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
Changes in v2:
- Warn if we're more than 15 MHz from ideal rate (Shawn)
- Move code cleanup before set phyctrl_frqsel based on card clock (Shawn)
- Fix typo USB => SDHCI (Shawn)
drivers/phy/phy-rockchip-emmc.c | 82 ++++++++++++++++++++++++++++++++++-------
1 file changed, 69 insertions(+), 13 deletions(-)
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
index 23fe50864526..51ddd543fd04 100644
--- a/drivers/phy/phy-rockchip-emmc.c
+++ b/drivers/phy/phy-rockchip-emmc.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
@@ -78,16 +79,73 @@
struct rockchip_emmc_phy {
unsigned int reg_offset;
struct regmap *reg_base;
+ struct clk *emmcclk;
};
-static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
- bool on_off)
+static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
{
+ struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
unsigned int caldone;
unsigned int dllrdy;
+ unsigned int freqsel = PHYCTRL_FREQSEL_200M;
unsigned long timeout;
/*
+ * We purposely get the clock here and not in probe to avoid the
+ * circular dependency problem. We expect:
+ * - PHY driver to probe
+ * - SDHCI driver to start probe
+ * - SDHCI driver to register it's clock
+ * - SDHCI driver to get the PHY
+ * - SDHCI driver to power on the PHY
+ */
+ if (!rk_phy->emmcclk) {
+ rk_phy->emmcclk = devm_clk_get(&phy->dev, "emmcclk");
+
+ /* Don't expect defer at this point; try next time */
+ if (PTR_ERR(rk_phy->emmcclk) == -EPROBE_DEFER) {
+ dev_warn(&phy->dev, "Unexpected emmcclk defer\n");
+ rk_phy->emmcclk = NULL;
+ }
+ }
+
+ if (!IS_ERR_OR_NULL(rk_phy->emmcclk)) {
+ unsigned long rate = clk_get_rate(rk_phy->emmcclk);
+ unsigned long ideal_rate;
+ unsigned long diff;
+
+ switch (rate) {
+ case 0 ... 74999999:
+ ideal_rate = 50000000;
+ freqsel = PHYCTRL_FREQSEL_50M;
+ break;
+ case 75000000 ... 124999999:
+ ideal_rate = 100000000;
+ freqsel = PHYCTRL_FREQSEL_100M;
+ break;
+ case 125000000 ... 174999999:
+ ideal_rate = 150000000;
+ freqsel = PHYCTRL_FREQSEL_150M;
+ break;
+ default:
+ ideal_rate = 200000000;
+ break;
+ };
+
+ diff = (rate > ideal_rate) ?
+ rate - ideal_rate : ideal_rate - rate;
+
+ /*
+ * In order for tuning delays to be accurate we need to be
+ * pretty spot on for the DLL range, so warn if we're too
+ * far off. Also warn if we're above the 200 MHz max. Don't
+ * warn for really slow rates since we won't be tuning then.
+ */
+ if ((rate > 50000000 && diff > 15000000) || (rate > 200000000))
+ dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+ }
+
+ /*
* Keep phyctrl_pdb and phyctrl_endll low to allow
* initialization of CALIO state M/C DFFs
*/
@@ -132,6 +190,13 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
return -ETIMEDOUT;
}
+ /* Set the frequency of the DLL operation */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+ HIWORD_UPDATE(freqsel, PHYCTRL_FREQSEL_MASK,
+ PHYCTRL_FREQSEL_SHIFT));
+
+ /* Turn on the DLL */
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
@@ -168,23 +233,14 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
static int rockchip_emmc_phy_power_off(struct phy *phy)
{
- struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
-
/* Power down emmc phy analog blocks */
- return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF);
+ return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_OFF);
}
static int rockchip_emmc_phy_power_on(struct phy *phy)
{
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
- /* DLL operation: 200 MHz */
- regmap_write(rk_phy->reg_base,
- rk_phy->reg_offset + GRF_EMMCPHY_CON0,
- HIWORD_UPDATE(PHYCTRL_FREQSEL_200M,
- PHYCTRL_FREQSEL_MASK,
- PHYCTRL_FREQSEL_SHIFT));
-
/* Drive impedance: 50 Ohm */
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
@@ -207,7 +263,7 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
PHYCTRL_OTAPDLYSEL_SHIFT));
/* Power up emmc phy analog blocks */
- return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON);
+ return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
}
static const struct phy_ops ops = {
--
2.8.0.rc3.226.g39d4020
Powered by blists - more mailing lists