lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Jun 2016 10:00:45 -0700 From: Doug Anderson <dianders@...omium.org> To: Yakir Yang <ykk@...k-chips.com> Cc: David Airlie <airlied@...ux.ie>, Thierry Reding <thierry.reding@...il.com>, Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>, Mark Rutland <mark.rutland@....com>, Kumar Gala <galak@...eaurora.org>, Ian Campbell <ijc+devicetree@...lion.org.uk>, Emil Velikov <emil.l.velikov@...il.com>, "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>, "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org> Subject: Re: [PATCH v3 4/6] drm/panel: simple: Add support for Samsung LSN122DL01-C01 2560x1600 panel Yakir, On Sat, Jun 11, 2016 at 7:56 PM, Yakir Yang <ykk@...k-chips.com> wrote: > The Samsung LSN122DL01-C01 is an 12.2" 2560x1600 (WQXGA) TFT-LCD panel > connected using eDP interfaces. > > Signed-off-by: Yakir Yang <ykk@...k-chips.com> > --- > Changes in v3: > - Correct the size of panel_desc to active area 262mmx164mm (Emil, Stéphane) > > Changes in v2: None > > drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index 2d40a21..17cc973 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -1246,6 +1246,28 @@ static const struct panel_desc qd43003c0_40 = { > .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > }; > > +static const struct drm_display_mode samsung_lsn122dl01_c01_mode = { > + .clock = 271560, > + .hdisplay = 2560, > + .hsync_start = 2560 + 48, > + .hsync_end = 2560 + 48 + 32, > + .htotal = 2560 + 48 + 32 + 80, > + .vdisplay = 1600, > + .vsync_start = 1600 + 2, > + .vsync_end = 1600 + 2 + 5, > + .vtotal = 1600 + 2 + 5 + 57, > + .vrefresh = 60, > +}; > + > +static const struct panel_desc samsung_lsn122dl01_c01 = { > + .modes = &samsung_lsn122dl01_c01_mode, > + .num_modes = 1, > + .size = { > + .width = 262, > + .height = 164, Earlier you said that the active area of this panel was: > Display area 262.656(H) X 164.16(V) (12.2”diagonal) In other panels I looked at the EDID tended to round numbers, not truncate them. For instance the Starry panel that I sent the patch for says in the manual "262.7712 (H) x 164.232 (V)" but then the EDID says "263 x 164". That would mean your width should be 263 mm, not 262 mm. -Doug
Powered by blists - more mailing lists