[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160614231256.GA17242@rob-hp-laptop>
Date: Tue, 14 Jun 2016 18:12:56 -0500
From: Rob Herring <robh@...nel.org>
To: Chris Zhong <zyw@...k-chips.com>
Cc: dianders@...omium.org, tfiga@...omium.org, heiko@...ech.de,
yzq@...k-chips.com, groeck@...omium.org,
linux-rockchip@...ts.infradead.org,
Mark Yao <mark.yao@...k-chips.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [v2 PATCH 3/4] Documentation: bindings: add dt documentation for
cdn DP controller
On Mon, Jun 13, 2016 at 05:39:48PM +0800, Chris Zhong wrote:
> This patch adds a binding that describes the cdn DP controller for
> rk3399.
>
> Signed-off-by: Chris Zhong <zyw@...k-chips.com>
>
> ---
>
> Changes in v2: None
> Changes in v1:
> - add extcon node description
> - add #sound-dai-cells description
>
> .../bindings/display/rockchip/cdn-dp-rockchip.txt | 62 ++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
>
> diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
> new file mode 100644
> index 0000000..4a66fc3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
> @@ -0,0 +1,62 @@
> +Rockchip RK3399 specific extensions to the cdn Display Port
> +================================
> +
> +Required properties:
> +- compatible: must be "rockchip,cdn-dp"
SoC specific compatible string please.
> +
> +- reg: physical base address of the controller and length
> +
> +- clocks: from common clock binding: handle to dp clock.
> +
> +- clock-names: from common clock binding:
> + Required elements: "core_clk" "pclk" "spdif"
> +
> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> +
> +- ports: contain a port nodes with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> + contained 2 endpoints, connecting to the output of vop.
> +
> +- phys: from general PHY binding: the phandle for the PHY device.
> +
> +- extcon: extcon specifier for the Power Delivery
> +
> +- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
> +
> +-------------------------------------------------------------------------------
> +
> +Example:
> + cdn_dp: dp@...00000 {
> + compatible = "rockchip,cdn-dp";
> + reg = <0x0 0xfec00000 0x0 0x100000>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
> + <&cru SCLK_SPDIF_REC_DPTX>;
> + clock-names = "core_clk", "pclk", "spdif";
> + phys = <&tcphy0>;
> + extcon = <&fusb1>;
> + rockchip,grf = <&grf>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
Don't need these with a single port.
> +
> + dp_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dp_in_vopb: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vopb_out_dp>;
> + };
> +
> + dp_in_vopl: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&vopl_out_dp>;
> + };
> + };
> + };
> + };
> --
> 2.6.3
>
>
Powered by blists - more mailing lists