[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1465870678-30128-3-git-send-email-wens@csie.org>
Date: Tue, 14 Jun 2016 10:17:49 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Mark Brown <broonie@...nel.org>, Lee Jones <lee.jones@...aro.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: Chen-Yu Tsai <wens@...e.org>, rtc-linux@...glegroups.com,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org
Subject: [PATCH 02/10] mfd: ac100: Add device tree bindings for X-Powers AC100 codec/RTC combo IC
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
Documentation/devicetree/bindings/mfd/ac100.txt | 42 +++++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt
diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
new file mode 100644
index 000000000000..fbab623e6fba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ac100.txt
@@ -0,0 +1,42 @@
+X-Powers AC100 Codec/RTC IC device tree bindings
+
+AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
+separated, including power supplies and interrupt lines, but share
+a common register address space and host interface.
+
+Required properties:
+- compatible: "x-powers,ac100"
+- reg: The I2C slave address or RSB hardware address for the chip
+- sub-nodes:
+ - codec
+ - compatible: "x-powers,ac100-codec"
+ - interrupt-parent: The parent interrupt controller
+ - interrupts: SoC NMI / GPIO interrupt connected to the IRQ_AUDIO pin
+ - rtc
+ - compatible: "x-powers,ac100-rtc"
+ - interrupt-parent: The parent interrupt controller
+ - interrupts: SoC NMI / GPIO interrupt connected to the IRQ_RTC pin
+ - #clock-cells: shall be 1
+ - clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc"
+ - see clock/clock-bindings.txt for common clock bindings
+
+Example:
+
+ac100: codec@e89 {
+ compatible = "x-powers,ac100";
+ reg = <0xe89>;
+
+ ac100_codec {
+ compatible = "x-powers,ac100-codec";
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ ac100_rtc {
+ compatible = "x-powers,ac100-rtc";
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
+ };
+};
--
2.8.1
Powered by blists - more mailing lists