[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160614161227.GA10893@kwestfie-linux.qualcomm.com>
Date: Tue, 14 Jun 2016 09:12:27 -0700
From: Kenneth Westfield <kwestfie@...eaurora.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: Mark Brown <broonie@...nel.org>, alsa-devel@...a-project.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kwestfie@...eaurora.org,
plai@...eaurora.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v3 1/2] ASoC: msm8916: Add codec Device Tree bindings.
On Fri, Jun 10, 2016 at 11:18:44AM -0700, Srinivas Kandagatla wrote:
> diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd.txt
> b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd.txt
> new file mode 100644
> index 0000000..0559c1f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd.txt
> @@ -0,0 +1,103 @@
> +msm8916 audio CODEC audio CODEC
> +
> +Codec IP is divided into two parts, first analog which is integrated in
> pmic pm8916
> +and secondly digital part which is integrated into application processor.
> Codec register
> +controls are also split across pmic an lpass. Analog part is controlled
> via spmi bus to pmic.
Cleaning up the description:
msm8916 audio CODEC
Codec IP is divided into two parts:
* analog, which is integrated into pmic pm8916
* digital, which is integrated into LPASS on the SOC
Codec registers are also split across pmic and LPASS.
Analog codec is controlled via spmi bus to pmic.
> +## Bindings for codec core on pmic:
> +
> +Required properties
> + - compatible = "qcom,msm8916-pmic-wcd-codec";
OK. Looking at this again, I think its better just to drop the pmic.
> + "spk_cnp_int" - Speaker click and pop interrupt
> + "spk_clip_int" - Speaker clip interrupt
> + "spk_ocp_int" - Speaker over current protect interrupt.
> + "ins_rem_det1" - jack insert removal detect interrupt 1.
> + "but_rel_det" - button release interrupt
> + "but_press_det" - button press event
> + "ins_rem_det" - jack insert removal detect interrup
> + "mbhc_int" - multi button headset interrupt.
> + "ear_ocp_int" - Earphone over current protect interrupt.
> + "hphr_ocp_int" - Headphone R over current protect interrupt.
> + "hphl_ocp_det" - Headphone L over current protect interrupt
> + "ear_cnp_int" - earphone cnp interrupt.
> + "hphr_cnp_int" - hphr click and pop interrupt.
> + "hphl_cnp_int" - hphl click and pop interrupt
Please use labels that more closely match the HW spec:
"cdc_spk_cnp_int"
"cdc_spk_clip_int"
"cdc_spk_ocp_int"
"mbhc_ins_rem_det1"
"mbhc_but_rel_det"
"mbhc_but_press_det"
"mbhc_ins_rem_det"
"mbhc_switch_int"
"cdc_ear_ocp_int"
"cdc_hphr_ocp_int"
"cdc_hphl_ocp_int"
"cdc_ear_cnp_int"
"cdc_hphr_cnp_int"
"cdc_hphl_cnp_int"
--
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists