| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACxGe6sE0oWRXd+vAERQQvQoW52+cfEJ19T_KzLN9bbpTWLnbg@mail.gmail.com>
Date: Tue, 14 Jun 2016 22:33:46 +0100
From: Grant Likely <grant.likely@...retlab.ca>
To: Bastien Nocera <hadess@...ess.net>
Cc: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Jiri Kosina <jikos@...nel.org>, benjamin.tissoires@...hat.com,
Jonathan Cameron <jic23@...nel.org>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
linux-iio@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
chaya.golan@...el.com, daniel.drubin@...el.com,
Darren Hart <darren@...art.com>
Subject: Re: [RFC 0/4] Intel Integrated Sensor Hub Support (ISH)
On Tue, Jun 14, 2016 at 6:01 PM, Bastien Nocera <hadess@...ess.net> wrote:
> On Tue, 2016-06-14 at 17:08 +0100, Grant Likely wrote:
>> On Tue, Jun 14, 2016 at 4:12 PM, Bastien Nocera <hadess@...ess.net>
>> wrote:
>> > On Tue, 2016-06-14 at 14:44 +0100, Grant Likely wrote:
>> > > On Fri, Jun 10, 2016 at 4:27 PM, Bastien Nocera <hadess@...ess.ne
>> > > t>
>> > > wrote:
>> > > > On Fri, 2016-06-10 at 08:23 -0700, Srinivas Pandruvada wrote:
>> > > > > On Fri, 2016-06-10 at 17:04 +0200, Bastien Nocera wrote:
>> > > > > > >
>> > > > >
>> > > > > [...]
>> > > > >
>> > > > > > Are there any errors when setting the triggers?
>> > > > > >
>> > > > > Is there any debug option in this service to give more
>> > > > > verbose
>> > > > > output?
>> > > >
>> > > > Add:
>> > > > Environment="G_MESSAGES_DEBUG=all"
>> > > >
>> > > > To the service file. You should see the debug in systemctl:
>> > > > systemctl status iio-sensor-proxy.service
>> > > >
>> > > > Or in journalctl if there's too much data:
>> > > > journalctl --reverse -u iio-sensor-proxy.service
>> > >
>> > > Still no joy on the sensors. The proxy starts up and detects the
>> > > sensors, but I don't see any sensor events occurring:
>> >
>> > Could you try again with the current master of iio-sensor-proxy?
>> > Make
>> > sure to install the file in the same location as in your distro
>> > provided package.
>> >
>> > I've added more debug/warnings to a few cases where it would have
>> > silently failed in the past.
>> >
>> > In particular, I don't see any messages that would be coming out
>> > of:
>> > https://github.com/hadess/iio-sensor-proxy/blob/master/src/iio-buff
>> > er-utils.c#L512
>> >
>> > Could it be that the sub-directory is populated after the device is
>> > created in the kernel, causing a race?
>> >
>> > Either that, or the contents of the scan_elements/ directory is not
>> > the
>> > one expected by this code.
>> >
>> > The output of this command should us that:
>> > ls /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-
>> > A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-
>> > 200073.8.auto/iio:device1/scan_elements
>>
>> Hmmm, this is interesting. I fetched, built and ran the latest
>> iio-sensor-proxy. It quit with the following error. However,
>> immediately afterwards, I ran the Debian packaged version (1.1-1),
>> and
>> the sensors started to work. Something in the latest master activates
>> the sensors enough for the older version to work.
>
> There's no changes in that code other than me introducing a bug that'd
> make it throw a warning when the sensor was already enabled. Fixed now.
>
> Could you try again, but make sure to replace the existing iio-sensor-
> proxy so it's started on boot, when the device appears. If you see the
> warning again, please attach the output out from "ls" as requested in
> the earlier mail.
Oops, missed that the first time. Here you go:
root@...dys:~# ls
/sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements
in_accel_x_en in_accel_y_en in_accel_z_en
in_accel_x_index in_accel_y_index in_accel_z_index
in_accel_x_type in_accel_y_type in_accel_z_type
> If it doesn't warn on startup, and it fails to work, then we're
> probably looking at a bug in the kernel...
Here is the output. The latest master still doesn't work. However, it
has the same behaviour that running the broken version of
iio-sensors-proxy (207b5bbd8) will cause the good one start working
(92fa6ea9e).
-- Logs begin at Tue 2016-06-14 22:19:47 BST, end at Tue 2016-06-14
22:20:52 BST. --
Jun 14 22:19:48 gladys systemd[1]: Starting IIO Sensor Proxy service...
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Found accel_3d at
/sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Found device /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1
of type accelerometer at IIO Buffer accelerometer
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Found magn_3d at
/sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Found device /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6
of type compass at IIO Buffer Compass
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Found associated trigger at
/sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/trigger1
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements/in_accel_x_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements/in_accel_y_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements/in_accel_z_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_accel_x: is signed: 1, bytes: 4, bits_used: 32, shift:
0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_accel_y: is signed: 1, bytes: 4, bits_used: 32, shift:
0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_accel_z: is signed: 1, bytes: 4, bits_used: 32, shift:
0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_accel_x: is signed: 1, bytes: 4, bits_used:
32, shift: 0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_accel_y: is signed: 1, bytes: 4, bits_used:
32, shift: 0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_accel_z: is signed: 1, bytes: 4, bits_used:
32, shift: 0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Found associated trigger at
/sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/trigger6
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_magn_x_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_magn_y_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_magn_z_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_magn_x: is signed: 1, bytes: 4, bits_used: 32, shift:
0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_magn_y: is signed: 1, bytes: 4, bits_used: 32, shift:
0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_magn_z: is signed: 1, bytes: 4, bits_used: 32, shift:
0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Got type for in_rot_from_north_magnetic_tilt_comp: is signed: 1,
bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_magn_x: is signed: 1, bytes: 4, bits_used:
32, shift: 0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_magn_y: is signed: 1, bytes: 4, bits_used:
32, shift: 0, mask: 0x0, be: 0
Jun 14 22:19:48 gladys systemd[1]: Started IIO Sensor Proxy service.
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_magn_z: is signed: 1, bytes: 4, bits_used:
32, shift: 0, mask: 0x0, be: 0
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Built channel array for in_rot_from_north_magnetic_tilt_comp: is
signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Handling driver refcounting method 'ClaimAccelerometer' for
accelerometer device
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Handling driver refcounting method 'ReleaseLight' for ambient light
sensor device
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
Handling driver refcounting method 'ClaimAccelerometer' for
accelerometer device
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG:
No new data available
Jun 14 22:20:47 gladys systemd[1]: Stopping IIO Sensor Proxy service...
Jun 14 22:20:47 gladys iio-sensor-proxy[577]: ** (process:577):
Jun 14 22:20:47 gladys systemd[1]: Stopped IIO Sensor Proxy service.
>
> Cheers
Powered by blists - more mailing lists