[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1465988991-1220-1-git-send-email-boris.brezillon@free-electrons.com>
Date: Wed, 15 Jun 2016 13:09:51 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH] mtd: nand: Fix nand_command_lp() for 8bits opcodes
8 bits opcodes should be followed by a single address cycle. Make the
2nd address cycle dependent of !nand_opcode_8bits(command).
Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
---
drivers/mtd/nand/nand_base.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 0b0dc29..c2f83236 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -745,7 +745,10 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
- chip->cmd_ctrl(mtd, column >> 8, ctrl);
+
+ /* Only ouput a single addr cycle for 8bits opcodes. */
+ if (!nand_opcode_8bits(command))
+ chip->cmd_ctrl(mtd, column >> 8, ctrl);
}
if (page_addr != -1) {
chip->cmd_ctrl(mtd, page_addr, ctrl);
--
2.7.4
Powered by blists - more mailing lists