| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160615160219.GP4948@dell>
Date: Wed, 15 Jun 2016 17:02:19 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Wadim Egorov <w.egorov@...tec.de>
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
rtc-linux@...glegroups.com, devicetree@...r.kernel.org,
linux-rockchip@...ts.infradead.org, robh+dt@...nel.org,
mark.rutland@....com, mturquette@...libre.com,
sboyd@...eaurora.org, lgirdwood@...il.com, broonie@...nel.org,
a.zummo@...ertech.it, alexandre.belloni@...e-electrons.com,
dianders@...omium.org, zyw@...k-chips.com
Subject: Re: [PATCH v6 1/5] mfd: RK808: Add RK818 support
On Mon, 13 Jun 2016, Wadim Egorov wrote:
> The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
> devices. It contains the following components:
>
> - Regulators
> - RTC
> - Clocking
> - Battery support
>
> Both RK808 and RK818 chips are using a similar register map,
> so we can reuse the RTC and Clocking functionality.
>
> Signed-off-by: Wadim Egorov <w.egorov@...tec.de>
> ---
> Changes since v5:
> - Few spell fixes in the commit description
> - Alignment fixes
> - Moved rk808_reg_data struct back to c file
> - Removed cells and pre_init_reg from the rk808 struct
> - Moved of_match_device and variant determination to probe
> ---
> drivers/mfd/Kconfig | 4 +-
> drivers/mfd/rk808.c | 225 +++++++++++++++++++++++++++++++++++++++-------
> include/linux/mfd/rk808.h | 152 +++++++++++++++++++++++++++++--
> 3 files changed, 339 insertions(+), 42 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601..d0b7ea3 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -839,13 +839,13 @@ config MFD_RC5T583
> different functionality of the device.
>
> config MFD_RK808
> - tristate "Rockchip RK808 Power Management chip"
> + tristate "Rockchip RK808/RK818 Power Management Chip"
> depends on I2C && OF
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> help
> - If you say yes here you get support for the RK808
> + If you say yes here you get support for the RK808 and RK818
> Power Management chips.
> This driver provides common support for accessing the device
> through I2C interface. The device supports multiple sub-devices
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index 49d7f62..66f7b08 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -1,11 +1,15 @@
> /*
> - * MFD core driver for Rockchip RK808
> + * MFD core driver for Rockchip RK808/RK818
> *
> * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> *
> * Author: Chris Zhong <zyw@...k-chips.com>
> * Author: Zhang Qing <zhangqing@...k-chips.com>
> *
> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH
> + *
> + * Author: Wadim Egorov <w.egorov@...tec.de>
> + *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms and conditions of the GNU General Public License,
> * version 2, as published by the Free Software Foundation.
> @@ -22,6 +26,7 @@
> #include <linux/mfd/core.h>
> #include <linux/module.h>
> #include <linux/regmap.h>
> +#include <linux/of_device.h>
>
> struct rk808_reg_data {
> int addr;
> @@ -57,6 +62,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> return false;
> }
>
> +static const struct regmap_config rk818_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = RK818_USB_CTRL_REG,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = rk808_is_volatile_reg,
> +};
> +
> static const struct regmap_config rk808_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> @@ -79,11 +92,21 @@ static const struct mfd_cell rk808s[] = {
> {
> .name = "rk808-rtc",
> .num_resources = ARRAY_SIZE(rtc_resources),
> - .resources = &rtc_resources[0],
> + .resources = rtc_resources,
> },
> };
>
> -static const struct rk808_reg_data pre_init_reg[] = {
> +static const struct mfd_cell rk818s[] = {
> + { .name = "rk808-clkout", },
> + { .name = "rk808-regulator", },
> + {
> + .name = "rk808-rtc",
> + .num_resources = ARRAY_SIZE(rtc_resources),
> + .resources = rtc_resources,
> + },
> +};
> +
> +static const struct rk808_reg_data rk808_pre_init_reg[] = {
> { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
> { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
> { RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
> @@ -94,6 +117,24 @@ static const struct rk808_reg_data pre_init_reg[] = {
> VB_LO_SEL_3500MV },
> };
>
> +static const struct rk808_reg_data rk818_pre_init_reg[] = {
> + /* improve efficiency */
> + { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA },
> + { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA },
> + { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
> + { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK,
> + RK818_USB_ILMIN_2000MA },
> + /* close charger when usb lower then 3.4V */
> + { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK,
> + (0x7 << 4) },
> + /* no action when vref */
> + { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL },
> + /* enable HDMI 5V */
> + { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN },
> + { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT |
> + VB_LO_SEL_3500MV },
> +};
> +
> static const struct regmap_irq rk808_irqs[] = {
> /* INT_STS */
> [RK808_IRQ_VOUT_LO] = {
> @@ -136,6 +177,76 @@ static const struct regmap_irq rk808_irqs[] = {
> },
> };
>
> +static const struct regmap_irq rk818_irqs[] = {
> + /* INT_STS */
> + [RK818_IRQ_VOUT_LO] = {
> + .mask = RK818_IRQ_VOUT_LO_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_VB_LO] = {
> + .mask = RK818_IRQ_VB_LO_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_PWRON] = {
> + .mask = RK818_IRQ_PWRON_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_PWRON_LP] = {
> + .mask = RK818_IRQ_PWRON_LP_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_HOTDIE] = {
> + .mask = RK818_IRQ_HOTDIE_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_RTC_ALARM] = {
> + .mask = RK818_IRQ_RTC_ALARM_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_RTC_PERIOD] = {
> + .mask = RK818_IRQ_RTC_PERIOD_MSK,
> + .reg_offset = 0,
> + },
> + [RK818_IRQ_USB_OV] = {
> + .mask = RK818_IRQ_USB_OV_MSK,
> + .reg_offset = 0,
> + },
> +
> + /* INT_STS2 */
> + [RK818_IRQ_PLUG_IN] = {
> + .mask = RK818_IRQ_PLUG_IN_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_PLUG_OUT] = {
> + .mask = RK818_IRQ_PLUG_OUT_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_CHG_OK] = {
> + .mask = RK818_IRQ_CHG_OK_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_CHG_TE] = {
> + .mask = RK818_IRQ_CHG_TE_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_CHG_TS1] = {
> + .mask = RK818_IRQ_CHG_TS1_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_TS2] = {
> + .mask = RK818_IRQ_TS2_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_CHG_CVTLIM] = {
> + .mask = RK818_IRQ_CHG_CVTLIM_MSK,
> + .reg_offset = 1,
> + },
> + [RK818_IRQ_DISCHG_ILIM] = {
> + .mask = RK818_IRQ_DISCHG_ILIM_MSK,
> + .reg_offset = 1,
> + },
> +};
> +
> static struct regmap_irq_chip rk808_irq_chip = {
> .name = "rk808",
> .irqs = rk808_irqs,
> @@ -148,6 +259,18 @@ static struct regmap_irq_chip rk808_irq_chip = {
> .init_ack_masked = true,
> };
>
> +static struct regmap_irq_chip rk818_irq_chip = {
> + .name = "rk818",
> + .irqs = rk818_irqs,
> + .num_irqs = ARRAY_SIZE(rk818_irqs),
> + .num_regs = 2,
> + .irq_reg_stride = 2,
> + .status_base = RK818_INT_STS_REG1,
> + .mask_base = RK818_INT_STS_MSK_REG1,
> + .ack_base = RK818_INT_STS_REG1,
> + .init_ack_masked = true,
> +};
> +
> static struct i2c_client *rk808_i2c_client;
> static void rk808_device_shutdown(void)
> {
> @@ -167,55 +290,99 @@ static void rk808_device_shutdown(void)
> dev_err(&rk808_i2c_client->dev, "power off error!\n");
> }
>
> +static const struct of_device_id rk808_of_match[] = {
> + { .compatible = "rockchip,rk808", .data = (void *) RK808_ID },
> + { .compatible = "rockchip,rk818", .data = (void *) RK818_ID },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, rk808_of_match);
> +
> static int rk808_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct device_node *np = client->dev.of_node;
> struct rk808 *rk808;
> + const struct of_device_id *match;
> + const struct rk808_reg_data *pre_init_reg;
> + const struct mfd_cell *cells;
> + int nr_pre_init_regs;
> + int nr_cells;
> int pm_off = 0;
> int ret;
> int i;
>
> - if (!client->irq) {
> - dev_err(&client->dev, "No interrupt support, no core IRQ\n");
> - return -EINVAL;
> - }
> -
> rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
> if (!rk808)
> return -ENOMEM;
>
> - rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
> + match = of_match_device(rk808_of_match, &client->dev);
> + if (!match) {
> + dev_err(&client->dev, "Unable to match OF ID\n");
> + return -ENODEV;
> + }
> + rk808->variant = (long)match->data;
> +
> + switch (rk808->variant) {
> + case RK808_ID:
> + rk808->regmap_cfg = &rk808_regmap_config;
> + rk808->regmap_irq_chip = &rk808_irq_chip;
> + pre_init_reg = rk808_pre_init_reg;
> + nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
> + cells = rk808s;
> + nr_cells = ARRAY_SIZE(rk808s);
> + break;
> + case RK818_ID:
> + rk808->regmap_cfg = &rk818_regmap_config;
> + rk808->regmap_irq_chip = &rk818_irq_chip;
> + pre_init_reg = rk818_pre_init_reg;
> + nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
> + cells = rk818s;
> + nr_cells = ARRAY_SIZE(rk818s);
> + break;
> + default:
> + dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
> + rk808->variant);
> + return -EINVAL;
> + }
> +
> + rk808->i2c = client;
> + i2c_set_clientdata(client, rk808);
> +
> + rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
> if (IS_ERR(rk808->regmap)) {
> dev_err(&client->dev, "regmap initialization failed\n");
> return PTR_ERR(rk808->regmap);
> }
>
> - for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
> - ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
> - pre_init_reg[i].mask,
> - pre_init_reg[i].value);
> - if (ret) {
> - dev_err(&client->dev,
> - "0x%x write err\n", pre_init_reg[i].addr);
> - return ret;
> - }
> + if (!client->irq) {
> + dev_err(&client->dev, "No interrupt support, no core IRQ\n");
> + return -EINVAL;
> }
>
> ret = regmap_add_irq_chip(rk808->regmap, client->irq,
> IRQF_ONESHOT, -1,
> - &rk808_irq_chip, &rk808->irq_data);
> + rk808->regmap_irq_chip, &rk808->irq_data);
> if (ret) {
> dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
> return ret;
> }
>
> - rk808->i2c = client;
> - i2c_set_clientdata(client, rk808);
> + for (i = 0; i < nr_pre_init_regs; i++) {
> + ret = regmap_update_bits(rk808->regmap,
> + pre_init_reg[i].addr,
> + pre_init_reg[i].mask,
> + pre_init_reg[i].value);
> + if (ret) {
> + dev_err(&client->dev,
> + "0x%x write err\n",
> + pre_init_reg[i].addr);
> + return ret;
> + }
> + }
>
> - ret = devm_mfd_add_devices(&client->dev, -1,
> - rk808s, ARRAY_SIZE(rk808s), NULL, 0,
> - regmap_irq_get_domain(rk808->irq_data));
> + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
> + cells, nr_cells, NULL, 0,
> + regmap_irq_get_domain(rk808->irq_data));
> if (ret) {
> dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
> goto err_irq;
> @@ -245,14 +412,9 @@ static int rk808_remove(struct i2c_client *client)
> return 0;
> }
>
> -static const struct of_device_id rk808_of_match[] = {
> - { .compatible = "rockchip,rk808" },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, rk808_of_match);
> -
> static const struct i2c_device_id rk808_ids[] = {
> { "rk808" },
> + { "rk818" },
> { },
> };
> MODULE_DEVICE_TABLE(i2c, rk808_ids);
> @@ -272,4 +434,5 @@ module_i2c_driver(rk808_i2c_driver);
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Chris Zhong <zyw@...k-chips.com>");
> MODULE_AUTHOR("Zhang Qing <zhangqing@...k-chips.com>");
> -MODULE_DESCRIPTION("RK808 PMIC driver");
> +MODULE_AUTHOR("Wadim Egorov <w.egorov@...tec.de>");
> +MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
> index 441b6ee..e5ae21d 100644
> --- a/include/linux/mfd/rk808.h
> +++ b/include/linux/mfd/rk808.h
> @@ -1,11 +1,15 @@
> /*
> - * rk808.h for Rockchip RK808
> + * Register definitions for Rockchip's RK808/RK818 PMIC
> *
> * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> *
> * Author: Chris Zhong <zyw@...k-chips.com>
> * Author: Zhang Qing <zhangqing@...k-chips.com>
> *
> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH
> + *
> + * Author: Wadim Egorov <w.egorov@...tec.de>
> + *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms and conditions of the GNU General Public License,
> * version 2, as published by the Free Software Foundation.
> @@ -16,8 +20,8 @@
> * more details.
> */
>
> -#ifndef __LINUX_REGULATOR_rk808_H
> -#define __LINUX_REGULATOR_rk808_H
> +#ifndef __LINUX_REGULATOR_RK808_H
> +#define __LINUX_REGULATOR_RK808_H
>
> #include <linux/regulator/machine.h>
> #include <linux/regmap.h>
> @@ -28,7 +32,7 @@
>
> #define RK808_DCDC1 0 /* (0+RK808_START) */
> #define RK808_LDO1 4 /* (4+RK808_START) */
> -#define RK808_NUM_REGULATORS 14
> +#define RK808_NUM_REGULATORS 14
>
> enum rk808_reg {
> RK808_ID_DCDC1,
> @@ -115,7 +119,92 @@ enum rk808_reg {
> #define RK808_INT_STS_MSK_REG2 0x4f
> #define RK808_IO_POL_REG 0x50
>
> -/* IRQ Definitions */
> +/* RK818 */
> +#define RK818_DCDC1 0
> +#define RK818_LDO1 4
> +#define RK818_NUM_REGULATORS 17
> +
> +enum rk818_reg {
> + RK818_ID_DCDC1,
> + RK818_ID_DCDC2,
> + RK818_ID_DCDC3,
> + RK818_ID_DCDC4,
> + RK818_ID_BOOST,
> + RK818_ID_LDO1,
> + RK818_ID_LDO2,
> + RK818_ID_LDO3,
> + RK818_ID_LDO4,
> + RK818_ID_LDO5,
> + RK818_ID_LDO6,
> + RK818_ID_LDO7,
> + RK818_ID_LDO8,
> + RK818_ID_LDO9,
> + RK818_ID_SWITCH,
> + RK818_ID_HDMI_SWITCH,
> + RK818_ID_OTG_SWITCH,
> +};
> +
> +#define RK818_DCDC_EN_REG 0x23
> +#define RK818_LDO_EN_REG 0x24
> +#define RK818_SLEEP_SET_OFF_REG1 0x25
> +#define RK818_SLEEP_SET_OFF_REG2 0x26
> +#define RK818_DCDC_UV_STS_REG 0x27
> +#define RK818_DCDC_UV_ACT_REG 0x28
> +#define RK818_LDO_UV_STS_REG 0x29
> +#define RK818_LDO_UV_ACT_REG 0x2a
> +#define RK818_DCDC_PG_REG 0x2b
> +#define RK818_LDO_PG_REG 0x2c
> +#define RK818_VOUT_MON_TDB_REG 0x2d
> +#define RK818_BUCK1_CONFIG_REG 0x2e
> +#define RK818_BUCK1_ON_VSEL_REG 0x2f
> +#define RK818_BUCK1_SLP_VSEL_REG 0x30
> +#define RK818_BUCK2_CONFIG_REG 0x32
> +#define RK818_BUCK2_ON_VSEL_REG 0x33
> +#define RK818_BUCK2_SLP_VSEL_REG 0x34
> +#define RK818_BUCK3_CONFIG_REG 0x36
> +#define RK818_BUCK4_CONFIG_REG 0x37
> +#define RK818_BUCK4_ON_VSEL_REG 0x38
> +#define RK818_BUCK4_SLP_VSEL_REG 0x39
> +#define RK818_BOOST_CONFIG_REG 0x3a
> +#define RK818_LDO1_ON_VSEL_REG 0x3b
> +#define RK818_LDO1_SLP_VSEL_REG 0x3c
> +#define RK818_LDO2_ON_VSEL_REG 0x3d
> +#define RK818_LDO2_SLP_VSEL_REG 0x3e
> +#define RK818_LDO3_ON_VSEL_REG 0x3f
> +#define RK818_LDO3_SLP_VSEL_REG 0x40
> +#define RK818_LDO4_ON_VSEL_REG 0x41
> +#define RK818_LDO4_SLP_VSEL_REG 0x42
> +#define RK818_LDO5_ON_VSEL_REG 0x43
> +#define RK818_LDO5_SLP_VSEL_REG 0x44
> +#define RK818_LDO6_ON_VSEL_REG 0x45
> +#define RK818_LDO6_SLP_VSEL_REG 0x46
> +#define RK818_LDO7_ON_VSEL_REG 0x47
> +#define RK818_LDO7_SLP_VSEL_REG 0x48
> +#define RK818_LDO8_ON_VSEL_REG 0x49
> +#define RK818_LDO8_SLP_VSEL_REG 0x4a
> +#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
> +#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
> +#define RK818_DEVCTRL_REG 0x4b
> +#define RK818_INT_STS_REG1 0X4c
> +#define RK818_INT_STS_MSK_REG1 0x4d
> +#define RK818_INT_STS_REG2 0x4e
> +#define RK818_INT_STS_MSK_REG2 0x4f
> +#define RK818_IO_POL_REG 0x50
> +#define RK818_H5V_EN_REG 0x52
> +#define RK818_SLEEP_SET_OFF_REG3 0x53
> +#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
> +#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
> +#define RK818_BOOST_CTRL_REG 0x56
> +#define RK818_DCDC_ILMAX 0x90
> +#define RK818_USB_CTRL_REG 0xa1
> +
> +#define RK818_H5V_EN BIT(0)
> +#define RK818_REF_RDY_CTRL BIT(1)
> +#define RK818_USB_ILIM_SEL_MASK 0xf
> +#define RK818_USB_ILMIN_2000MA 0x7
> +#define RK818_USB_CHG_SD_VSEL_MASK 0x70
> +
> +/* RK808 IRQ Definitions */
> #define RK808_IRQ_VOUT_LO 0
> #define RK808_IRQ_VB_LO 1
> #define RK808_IRQ_PWRON 2
> @@ -137,6 +226,43 @@ enum rk808_reg {
> #define RK808_IRQ_PLUG_IN_INT_MSK BIT(0)
> #define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1)
>
> +/* RK818 IRQ Definitions */
> +#define RK818_IRQ_VOUT_LO 0
> +#define RK818_IRQ_VB_LO 1
> +#define RK818_IRQ_PWRON 2
> +#define RK818_IRQ_PWRON_LP 3
> +#define RK818_IRQ_HOTDIE 4
> +#define RK818_IRQ_RTC_ALARM 5
> +#define RK818_IRQ_RTC_PERIOD 6
> +#define RK818_IRQ_USB_OV 7
> +#define RK818_IRQ_PLUG_IN 8
> +#define RK818_IRQ_PLUG_OUT 9
> +#define RK818_IRQ_CHG_OK 10
> +#define RK818_IRQ_CHG_TE 11
> +#define RK818_IRQ_CHG_TS1 12
> +#define RK818_IRQ_TS2 13
> +#define RK818_IRQ_CHG_CVTLIM 14
> +#define RK818_IRQ_DISCHG_ILIM 7
> +
> +#define RK818_IRQ_VOUT_LO_MSK BIT(0)
> +#define RK818_IRQ_VB_LO_MSK BIT(1)
> +#define RK818_IRQ_PWRON_MSK BIT(2)
> +#define RK818_IRQ_PWRON_LP_MSK BIT(3)
> +#define RK818_IRQ_HOTDIE_MSK BIT(4)
> +#define RK818_IRQ_RTC_ALARM_MSK BIT(5)
> +#define RK818_IRQ_RTC_PERIOD_MSK BIT(6)
> +#define RK818_IRQ_USB_OV_MSK BIT(7)
> +#define RK818_IRQ_PLUG_IN_MSK BIT(0)
> +#define RK818_IRQ_PLUG_OUT_MSK BIT(1)
> +#define RK818_IRQ_CHG_OK_MSK BIT(2)
> +#define RK818_IRQ_CHG_TE_MSK BIT(3)
> +#define RK818_IRQ_CHG_TS1_MSK BIT(4)
> +#define RK818_IRQ_TS2_MSK BIT(5)
> +#define RK818_IRQ_CHG_CVTLIM_MSK BIT(6)
> +#define RK818_IRQ_DISCHG_ILIM_MSK BIT(7)
> +
> +#define RK818_NUM_IRQ 16
> +
> #define RK808_VBAT_LOW_2V8 0x00
> #define RK808_VBAT_LOW_2V9 0x01
> #define RK808_VBAT_LOW_3V0 0x02
> @@ -191,9 +317,17 @@ enum {
> BOOST_ILMIN_250MA,
> };
>
> +enum {
> + RK808_ID,
> + RK818_ID,
> +};
> +
> struct rk808 {
> - struct i2c_client *i2c;
> - struct regmap_irq_chip_data *irq_data;
> - struct regmap *regmap;
> + struct i2c_client *i2c;
> + struct regmap_irq_chip_data *irq_data;
> + struct regmap *regmap;
> + long variant;
> + const struct regmap_config *regmap_cfg;
> + const struct regmap_irq_chip *regmap_irq_chip;
> };
> -#endif /* __LINUX_REGULATOR_rk808_H */
> +#endif /* __LINUX_REGULATOR_RK808_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists