| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8531046.3ceRqUA835@wuerfel>
Date: Wed, 15 Jun 2016 22:09:38 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Russell King <linux@...linux.org.uk>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
Gregory CLEMENT <gregory.clement@...e-electrons.com>,
Andrew Lunn <andrew@...n.ch>,
Nicolas Pitre <nicolas.pitre@...aro.org>,
Rob Herring <robh@...nel.org>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Ganapatrao Kulkarni <gkulkarni@...iumnetworks.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Jayachandran C <jchandra@...adcom.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Ray Jui <rjui@...adcom.com>, Ley Foon Tan <lftan@...era.com>,
Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org
Subject: [PATCH] arm/arm64/irqchip/pci: fix PCI_MSI dependencies
The PCI_MSI symbol is used inconsistently throughout the tree,
with some drivers using 'select' and others using 'depends on',
or using conditional selects. This keeps causing problems,
and the latest one is a result of ARCH_ALPINE using a 'select'
statement to enable its platform specific MSI driver but not
enabling MSI support first:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI)
drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type
static struct msi_domain_info alpine_msix_domain_info = {
^~~~~~~~~~~~~~~
drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
^
drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function)
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
^~~~~~~~~~~~~~~~~~~~~~~~
There is little reason to enable PCI support for a platform that
uses MSI but then leaving MSI disabled at compile time.
I sent an earlier version that used 'select PCI_MSI' everywhere
in March, but that caused build regressions on x86.
This version instead selects PCI_MSI from irqchips that implement MSI,
and makes PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN,
which in turn is now enabled by default on all three architectures that
support it, whenever MSI is enabled.
I think it makes most sense to merge this patch through the PCI tree,
as new PCI host drivers get added occasionally, and they all need to
be adapted for this change.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
Suggested-by: Marc Zyngier <marc.zyngier@....com>
Acked-by: Marc Zyngier <marc.zyngier@....com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2171e5d97541..81e018710673 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -703,7 +703,7 @@ config ARCH_VIRT
depends on ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
- select ARM_GIC_V2M if PCI_MSI
+ select ARM_GIC_V2M if PCI
select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index d87e042059a1..9343d2738bf0 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -20,9 +20,9 @@ config ARM64
select ARM_ARCH_TIMER
select ARM_GIC
select AUDIT_ARCH_COMPAT_GENERIC
- select ARM_GIC_V2M if PCI_MSI
+ select ARM_GIC_V2M if PCI
select ARM_GIC_V3
- select ARM_GIC_V3_ITS if PCI_MSI
+ select ARM_GIC_V3_ITS if PCI
select ARM_PSCI_FW
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
@@ -1038,6 +1038,8 @@ source "arch/arm64/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
+if CRYPTO
source "arch/arm64/crypto/Kconfig"
+endif
source "lib/Kconfig"
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 5495a5ba8039..7f8728984f44 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -21,9 +21,9 @@ config ARM_GIC_MAX_NR
config ARM_GIC_V2M
bool
- depends on ARM_GIC
- depends on PCI && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI
+ select ARM_GIC
+ select PCI_MSI
config GIC_NON_BANKED
bool
@@ -37,7 +37,8 @@ config ARM_GIC_V3
config ARM_GIC_V3_ITS
bool
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI
+ depends on PCI_MSI
config ARM_NVIC
bool
@@ -62,13 +63,13 @@ config ARM_VIC_NR
config ARMADA_370_XP_IRQ
bool
select GENERIC_IRQ_CHIP
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ select PCI_MSI if PCI
config ALPINE_MSI
bool
- depends on PCI && PCI_MSI
+ depends on PCI
+ select PCI_MSI
select GENERIC_IRQ_CHIP
- select PCI_MSI_IRQ_DOMAIN
config ATMEL_AIC_IRQ
bool
@@ -117,7 +118,6 @@ config HISILICON_IRQ_MBIGEN
bool
select ARM_GIC_V3
select ARM_GIC_V3_ITS
- select GENERIC_MSI_IRQ_DOMAIN
config IMGPDC_IRQ
bool
@@ -250,12 +250,10 @@ config IRQ_MXS
config MVEBU_ODMI
bool
- select GENERIC_MSI_IRQ_DOMAIN
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
config PARTITION_PERCPU
bool
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56389be5d08b..67f9916ff14d 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -25,7 +25,7 @@ config PCI_MSI
If you don't know what to do here, say Y.
config PCI_MSI_IRQ_DOMAIN
- bool
+ def_bool ARM || ARM64 || X86
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 2057f71d855c..ccf317e73705 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,8 +3,9 @@ menu "PCI host controller drivers"
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
- select PCIE_DW
depends on OF && HAS_IOMEM && TI_PIPE3
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW
help
Enables support for the PCIe controller in the DRA7xx SoC. There
are two instances of PCIe controller in DRA7xx. This controller can
@@ -20,7 +21,7 @@ config PCI_MVEBU
config PCIE_XILINX_NWL
bool "NWL PCIe Core"
depends on ARCH_ZYNQMP
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say 'Y' here if you want kernel support for Xilinx
NWL PCIe controller. The controller can act as Root Port
@@ -29,6 +30,7 @@ config PCIE_XILINX_NWL
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
---help---
This selects the DesignWare PCIe controller support. Select this if
@@ -40,16 +42,19 @@ config PCIE_DW_PLAT
config PCIE_DW
bool
+ depends on PCI_MSI_IRQ_DOMAIN
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
@@ -72,8 +77,7 @@ config PCI_RCAR_GEN2
config PCIE_RCAR
bool "Renesas R-Car PCIe controller"
depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
- select PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say Y here if you want PCIe controller support on R-Car SoCs.
@@ -93,6 +97,7 @@ config PCI_HOST_GENERIC
config PCIE_SPEAR13XX
bool "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
@@ -101,6 +106,7 @@ config PCIE_SPEAR13XX
config PCI_KEYSTONE
bool "TI Keystone PCIe controller"
depends on ARCH_KEYSTONE
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -121,7 +127,6 @@ config PCI_XGENE
depends on ARCH_XGENE
depends on OF
select PCIEPORTBUS
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
help
Say Y here if you want internal PCI support on APM X-Gene SoC.
There are 5 internal PCIe ports available. Each port is GEN3 capable
@@ -129,7 +134,8 @@ config PCI_XGENE
config PCI_XGENE_MSI
bool "X-Gene v1 PCIe MSI feature"
- depends on PCI_XGENE && PCI_MSI
+ depends on PCI_XGENE
+ depends on PCI_MSI_IRQ_DOMAIN
default y
help
Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
@@ -138,6 +144,7 @@ config PCI_XGENE_MSI
config PCI_LAYERSCAPE
bool "Freescale Layerscape PCIe controller"
depends on OF && (ARM || ARCH_LAYERSCAPE)
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select MFD_SYSCON
help
@@ -178,8 +185,7 @@ config PCIE_IPROC_BCMA
config PCIE_IPROC_MSI
bool "Broadcom iProc PCIe MSI support"
depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
- depends on PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI_MSI_IRQ_DOMAIN
default ARCH_BCM_IPROC
help
Say Y here if you want to enable MSI support for Broadcom's iProc
@@ -196,8 +202,8 @@ config PCIE_ALTERA
config PCIE_ALTERA_MSI
bool "Altera PCIe MSI feature"
- depends on PCIE_ALTERA && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCIE_ALTERA
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say Y here if you want PCIe MSI support for the Altera FPGA.
This MSI driver supports Altera MSI to GIC controller IP.
@@ -205,6 +211,7 @@ config PCIE_ALTERA_MSI
config PCI_HISI
depends on OF && ARM64
bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
@@ -214,6 +221,7 @@ config PCI_HISI
config PCIE_QCOM
bool "Qualcomm PCIe controller"
depends on ARCH_QCOM && OF
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -238,6 +246,7 @@ config PCI_HOST_THUNDER_ECAM
config PCIE_ARMADA_8K
bool "Marvell Armada-8K PCIe controller"
depends on ARCH_MVEBU
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
Powered by blists - more mailing lists