| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160616145558.GB4948@dell>
Date: Thu, 16 Jun 2016 15:55:58 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Stefan Agner <stefan@...er.ch>
Cc: lgirdwood@...il.com, broonie@...nel.org, khilman@...libre.com,
carlo@...one.org, b.galvani@...il.com, max.oss.09@...il.com,
marcel@...wiler.com, linux@...linux.org.uk, galak@...eaurora.org,
ijc+devicetree@...lion.org.uk, mark.rutland@....com,
pawel.moll@....com, robh+dt@...nel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org
Subject: Re: [PATCH v2 2/5] mfd: add Ricoh RN5T567 PMIC support
On Tue, 07 Jun 2016, Stefan Agner wrote:
> The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is,
> the differences are:
>
> + DCDC4
> + Slightly different output voltage/currents
> + 32kHz Output
> - ADC/Charger capabilities
>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
> Signed-off-by: Stefan Agner <stefan@...er.ch>
> ---
> Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 ++++++++++-------
> drivers/mfd/Kconfig | 7 +++---
> drivers/mfd/rn5t618.c | 26 +++++++++++++++++------
> include/linux/mfd/rn5t618.h | 12 +++++++++++
> 4 files changed, 46 insertions(+), 18 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
> index 937785a..5b493ed 100644
> --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
> +++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
> @@ -1,18 +1,21 @@
> -* Ricoh RN5T618 PMIC
> +* Ricoh RN5T567/RN5T618 PMIC
>
> -Ricoh RN5T618 is a power management IC which integrates 3 step-down
> -DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
> -fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
> -through a I2C interface.
> +Ricoh RN5T567/RN5T618 is a power management IC family which integrates
> +3 to 5 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
> +a watchdog timer. The RN5T618 provides additionally a Li-ion battery
> +charger, fuel gauge and an ADC. It can be controlled through a I2C
Nit: s/a I2C/an I2C/
> +interface.
>
> Required properties:
> - - compatible: should be "ricoh,rn5t618"
> + - compatible: must be one of
> + "ricoh,rn5t567"
> + "ricoh,rn5t618"
> - reg: the I2C slave address of the device
>
> Sub-nodes:
> - regulators: the node is required if the regulator functionality is
> - needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
> - LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
> + needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
> + (RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
> The common bindings for each individual regulator can be found in:
> Documentation/devicetree/bindings/regulator/regulator.txt
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601..ff031a7 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -852,13 +852,14 @@ config MFD_RK808
> including interrupts, RTC, LDO & DCDC regulators, and onkey.
>
> config MFD_RN5T618
> - tristate "Ricoh RN5T5618 PMIC"
> + tristate "Ricoh RN5T567/618 PMIC"
> depends on I2C
> + depends on OF
> select MFD_CORE
> select REGMAP_I2C
> help
> - Say yes here to add support for the Ricoh RN5T618 PMIC. This
> - driver provides common support for accessing the device,
> + Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC.
> + This driver provides common support for accessing the device,
> additional drivers must be enabled in order to use the
> functionality of the device.
>
> diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
> index 0ad51d7..7607ced 100644
> --- a/drivers/mfd/rn5t618.c
> +++ b/drivers/mfd/rn5t618.c
> @@ -2,6 +2,7 @@
> * MFD core driver for Ricoh RN5T618 PMIC
> *
> * Copyright (C) 2014 Beniamino Galvani <b.galvani@...il.com>
> + * Copyright (C) 2016 Toradex AG
> *
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of the GNU General Public License
> @@ -15,6 +16,7 @@
> #include <linux/mfd/core.h>
> #include <linux/mfd/rn5t618.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> #include <linux/regmap.h>
>
> static const struct mfd_cell rn5t618_cells[] = {
> @@ -59,12 +61,26 @@ static void rn5t618_power_off(void)
> RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
> }
>
> +static const struct of_device_id rn5t618_of_match[] = {
> + { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
> + { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, rn5t618_of_match);
> +
> static int rn5t618_i2c_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
> {
> + const struct of_device_id *of_id =
> + of_match_device(rn5t618_of_match, &i2c->dev);
I'd prefer you did the call *after* the variable declarations.
> struct rn5t618 *priv;
> int ret;
So here ->
> + if (!of_id) {
> + dev_err(&i2c->dev, "Failed to find matching dt id\n");
s/dt id/DT ID/
> + return -EINVAL;
> + }
> +
> priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
> @@ -78,6 +94,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
> return ret;
> }
>
> + priv->variant = (long)of_id->data;
> +
Why here and not directly after the of_id check?
> ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
> ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
> if (ret) {
> @@ -105,12 +123,6 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
> return 0;
> }
>
> -static const struct of_device_id rn5t618_of_match[] = {
> - { .compatible = "ricoh,rn5t618" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, rn5t618_of_match);
> -
> static const struct i2c_device_id rn5t618_i2c_id[] = {
> { }
> };
> @@ -129,5 +141,5 @@ static struct i2c_driver rn5t618_i2c_driver = {
> module_i2c_driver(rn5t618_i2c_driver);
>
> MODULE_AUTHOR("Beniamino Galvani <b.galvani@...il.com>");
> -MODULE_DESCRIPTION("Ricoh RN5T618 MFD driver");
> +MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
> MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
> index c72d534..54179c2 100644
> --- a/include/linux/mfd/rn5t618.h
> +++ b/include/linux/mfd/rn5t618.h
> @@ -20,6 +20,7 @@
> #define RN5T618_OTPVER 0x01
> #define RN5T618_IODAC 0x02
> #define RN5T618_VINDAC 0x03
> +#define RN5T618_OUT32KEN 0x05
> #define RN5T618_CPUCNT 0x06
> #define RN5T618_PSWR 0x07
> #define RN5T618_PONHIS 0x09
> @@ -38,6 +39,7 @@
> #define RN5T618_DC1_SLOT 0x16
> #define RN5T618_DC2_SLOT 0x17
> #define RN5T618_DC3_SLOT 0x18
> +#define RN5T618_DC4_SLOT 0x19
> #define RN5T618_LDO1_SLOT 0x1b
> #define RN5T618_LDO2_SLOT 0x1c
> #define RN5T618_LDO3_SLOT 0x1d
> @@ -54,12 +56,16 @@
> #define RN5T618_DC2CTL2 0x2f
> #define RN5T618_DC3CTL 0x30
> #define RN5T618_DC3CTL2 0x31
> +#define RN5T618_DC4CTL 0x32
> +#define RN5T618_DC4CTL2 0x33
> #define RN5T618_DC1DAC 0x36
> #define RN5T618_DC2DAC 0x37
> #define RN5T618_DC3DAC 0x38
> +#define RN5T618_DC4DAC 0x39
> #define RN5T618_DC1DAC_SLP 0x3b
> #define RN5T618_DC2DAC_SLP 0x3c
> #define RN5T618_DC3DAC_SLP 0x3d
> +#define RN5T618_DC4DAC_SLP 0x3e
> #define RN5T618_DCIREN 0x40
> #define RN5T618_DCIRQ 0x41
> #define RN5T618_DCIRMON 0x42
> @@ -221,8 +227,14 @@ enum {
> RN5T618_REG_NUM,
> };
>
> +enum {
> + RN5T567 = 0,
> + RN5T618,
> +};
> +
> struct rn5t618 {
> struct regmap *regmap;
> + long variant;
What do you use this for?
> };
>
> #endif /* __LINUX_MFD_RN5T618_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists