[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160616153032.GC21702@dell>
Date: Thu, 16 Jun 2016 16:30:32 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Brian Norris <briannorris@...omium.org>
Cc: Thierry Reding <thierry.reding@...il.com>,
Olof Johansson <olof@...om.net>, linux-kernel@...r.kernel.org,
Doug Anderson <dianders@...omium.org>,
Brian Norris <computersforpeace@...il.com>,
linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Stephen Barber <smbarber@...omium.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Benson Leung <bleung@...omium.org>,
Enric Balletbo <enric.balletbo@...labora.co.uk>,
Randall Spangler <rspangler@...omium.org>,
Shawn Nematbakhsh <shawnn@...omium.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Todd Broch <tbroch@...omium.org>,
Gwendal Grignou <gwendal@...omium.org>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>
Subject: Re: [PATCH v2 1/4] mfd: cros_ec: Add cros_ec_cmd_xfer_status helper
On Thu, 02 Jun 2016, Brian Norris wrote:
> From: Tomeu Vizoso <tomeu.vizoso@...labora.com>
>
> So that callers of cros_ec_cmd_xfer don't have to repeat boilerplate
> code when checking for errors from the EC side.
>
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@...labora.com>
> Reviewed-by: Benson Leung <bleung@...omium.org>
> Signed-off-by: Brian Norris <briannorris@...omium.org>
> ---
> v2: no change
>
> drivers/platform/chrome/cros_ec_proto.c | 15 +++++++++++++++
> include/linux/mfd/cros_ec.h | 18 ++++++++++++++++++
> 2 files changed, 33 insertions(+)
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index b6e161f71b26..ecc544c728f0 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -380,3 +380,18 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> return ret;
> }
> EXPORT_SYMBOL(cros_ec_cmd_xfer);
> +
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg)
> +{
> + int ret;
> +
> + ret = cros_ec_cmd_xfer(ec_dev, msg);
> + if (ret < 0)
> + dev_err(ec_dev->dev, "Command xfer error (err:%d)\n", ret);
> + else if (msg->result != EC_RES_SUCCESS)
> + return -EECRESULT - msg->result;
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 64184d27e3cd..b1e48dfbf50a 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -40,6 +40,9 @@
> #define EC_MAX_REQUEST_OVERHEAD 1
> #define EC_MAX_RESPONSE_OVERHEAD 2
>
> +/* ec_command return value for non-success result from EC */
> +#define EECRESULT 1000
> +
> /*
> * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> */
> @@ -226,6 +229,21 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> struct cros_ec_command *msg);
>
> /**
> + * cros_ec_cmd_xfer_status - Send a command to the ChromeOS EC
> + *
> + * This function is identical to cros_ec_cmd_xfer, except it returns succes
s/succes/success/
I guess whoever takes this patch can do a quick fix-up job on it, so:
Acked-by: Lee Jones <lee.jones@...aro.org>
> + * status only if both the command was transmitted successfully and the EC
> + * replied with success status. It's not necessary to check msg->result when
> + * using this function.
> + *
> + * @ec_dev: EC device
> + * @msg: Message to write
> + * @return: Num. of bytes transferred on success, <0 on failure
> + */
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> * cros_ec_remove - Remove a ChromeOS EC
> *
> * Call this to deregister a ChromeOS EC, then clean up any private data.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists