| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1466112442-31105-59-git-send-email-daniel.lezcano@linaro.org>
Date: Thu, 16 Jun 2016 23:27:17 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: daniel.lezcano@...aro.org, tglx@...utronix.de
Cc: linux-kernel@...r.kernel.org, Ley Foon Tan <lftan@...era.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Viresh Kumar <viresh.kumar@...aro.org>,
Marc Zyngier <Marc.Zyngier@....com>,
nios2-dev@...ts.rocketboards.org (moderated list:NIOS2 ARCHITECTURE)
Subject: [PATCH V2 58/63] clocksource/drivers/nios2: Convert init function to return error
The init functions do not return any error. They behave as the following:
- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly
or
- print an error and let the caller unaware if the state of the system
Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.
Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
arch/nios2/kernel/time.c | 69 +++++++++++++++++++++++++++++++++---------------
1 file changed, 48 insertions(+), 21 deletions(-)
diff --git a/arch/nios2/kernel/time.c b/arch/nios2/kernel/time.c
index e835dda..9fa7739 100644
--- a/arch/nios2/kernel/time.c
+++ b/arch/nios2/kernel/time.c
@@ -206,15 +206,21 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void __init nios2_timer_get_base_and_freq(struct device_node *np,
+static int __init nios2_timer_get_base_and_freq(struct device_node *np,
void __iomem **base, u32 *freq)
{
*base = of_iomap(np, 0);
- if (!*base)
- panic("Unable to map reg for %s\n", np->name);
+ if (!*base) {
+ pr_crit("Unable to map reg for %s\n", np->name);
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", freq)) {
+ pr_crit("Unable to get %s clock frequency\n", np->name);
+ return -EINVAL;
+ }
- if (of_property_read_u32(np, "clock-frequency", freq))
- panic("Unable to get %s clock frequency\n", np->name);
+ return 0;
}
static struct nios2_clockevent_dev nios2_ce = {
@@ -231,17 +237,21 @@ static struct nios2_clockevent_dev nios2_ce = {
},
};
-static __init void nios2_clockevent_init(struct device_node *timer)
+static __init int nios2_clockevent_init(struct device_node *timer)
{
void __iomem *iobase;
u32 freq;
- int irq;
+ int irq, ret;
- nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+ ret = nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+ if (ret)
+ return ret;
irq = irq_of_parse_and_map(timer, 0);
- if (!irq)
- panic("Unable to parse timer irq\n");
+ if (!irq) {
+ pr_crit("Unable to parse timer irq\n");
+ return -EINVAL;
+ }
nios2_ce.timer.base = iobase;
nios2_ce.timer.freq = freq;
@@ -253,25 +263,35 @@ static __init void nios2_clockevent_init(struct device_node *timer)
/* clear pending interrupt */
timer_writew(&nios2_ce.timer, 0, ALTERA_TIMER_STATUS_REG);
- if (request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
- &nios2_ce.ced))
- panic("Unable to setup timer irq\n");
+ ret = request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
+ &nios2_ce.ced);
+ if (ret) {
+ pr_crit("Unable to setup timer irq\n");
+ return ret;
+ }
clockevents_config_and_register(&nios2_ce.ced, freq, 1, ULONG_MAX);
+
+ return 0;
}
-static __init void nios2_clocksource_init(struct device_node *timer)
+static __init int nios2_clocksource_init(struct device_node *timer)
{
unsigned int ctrl;
void __iomem *iobase;
u32 freq;
+ int ret;
- nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+ ret = nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+ if (ret)
+ return ret;
nios2_cs.timer.base = iobase;
nios2_cs.timer.freq = freq;
- clocksource_register_hz(&nios2_cs.cs, freq);
+ ret = clocksource_register_hz(&nios2_cs.cs, freq);
+ if (ret)
+ return ret;
timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODL_REG);
timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODH_REG);
@@ -282,6 +302,8 @@ static __init void nios2_clocksource_init(struct device_node *timer)
/* Calibrate the delay loop directly */
lpj_fine = freq / HZ;
+
+ return 0;
}
/*
@@ -289,22 +311,25 @@ static __init void nios2_clocksource_init(struct device_node *timer)
* more instances, the second one gets used as clocksource and all
* others are unused.
*/
-static void __init nios2_time_init(struct device_node *timer)
+static int __init nios2_time_init(struct device_node *timer)
{
static int num_called;
+ int ret;
switch (num_called) {
case 0:
- nios2_clockevent_init(timer);
+ ret = nios2_clockevent_init(timer);
break;
case 1:
- nios2_clocksource_init(timer);
+ ret = nios2_clocksource_init(timer);
break;
default:
break;
}
num_called++;
+
+ return ret;
}
void read_persistent_clock(struct timespec *ts)
@@ -321,10 +346,12 @@ void __init time_init(void)
for_each_compatible_node(np, NULL, ALTR_TIMER_COMPATIBLE)
count++;
- if (count < 2)
+ if (count < 2) {
panic("%d timer is found, it needs 2 timers in system\n", count);
clocksource_probe();
+
+ return 0;
}
-CLOCKSOURCE_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);
+CLOCKSOURCE_OF_DECLARE_RET(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);
--
1.9.1
Powered by blists - more mailing lists