lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <57639255.3010403@samsung.com>
Date:	Fri, 17 Jun 2016 08:01:57 +0200
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Laxman Dewangan <ldewangan@...dia.com>, javier@....samsung.com,
	mturquette@...libre.com, robh+dt@...nel.org, linux@...linux.org.uk
Cc:	linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org,
	Javier Martinez Canillas <javier@...hile0.org>
Subject: Re: [PATCH V2 1/4] clk: max77686: Combine Maxim max77686 and max77802
 driver

On 06/16/2016 03:23 PM, Laxman Dewangan wrote:
> The clock IP used on the Maxim PMICs max77686 and max77802 are
> same. The configuration of clock register is also same except
> the number of clocks.
> 
> Part of common code utilisation, there is 3 files for these chips
> clock driver, one for common and two files for driver registration.
> 
> Combine both drivers into single file and move common code into
> same common file reduces the 2 files and make max77686 and max77802
> clock driver in single fine. This driver does not depends on the
> parent driver structure. The regmap handle is acquired through
> regmap APIs for the register access.
> 
> This combination of driver helps on adding clock driver for different
> Maxim PMICs which has similar clock IP like MAX77620 and MAX20024.
> 
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
> CC: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> CC: Javier Martinez Canillas <javier@...hile0.org>
> Reviewed-by: Javier Martinez Canillas <javier@....samsung.com>
> Tested-by: Javier Martinez Canillas <javier@....samsung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> 
> ---
> Changes from V1:
> - Collected RB and TB from Javier.
> - Change the max_gen to max77686.
> - Rename structure and avoid duplication for reg and mask.
> - Taken care of comment from Krzysztof on coding.
> ---
>  drivers/clk/Kconfig        |  15 +--
>  drivers/clk/Makefile       |   2 -
>  drivers/clk/clk-max-gen.c  | 194 -----------------------------------
>  drivers/clk/clk-max-gen.h  |  32 ------
>  drivers/clk/clk-max77686.c | 244 ++++++++++++++++++++++++++++++++++++++++++---
>  drivers/clk/clk-max77802.c |  96 ------------------
>  6 files changed, 234 insertions(+), 349 deletions(-)
>  delete mode 100644 drivers/clk/clk-max-gen.c
>  delete mode 100644 drivers/clk/clk-max-gen.h
>  delete mode 100644 drivers/clk/clk-max77802.c


Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>

Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ