| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160617075349.GE21702@dell>
Date: Fri, 17 Jun 2016 08:53:49 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: Kukjin Kim <kgene@...nel.org>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <j.anaszewski@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-input@...r.kernel.org, linux-leds@...r.kernel.org,
linux-pm@...r.kernel.org, rtc-linux@...glegroups.com,
r.baldyga@...kerion.com,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [RESEND v7 1/6] mfd: max8997: Use regmap to access registers
FAO Mark,
Just your Ack missing on this set.
> From: Robert Baldyga <r.baldyga@...sung.com>
>
> This patch modifies max8997 driver and each associated function driver,
> to use regmap instead of operating directly on i2c bus. It will allow to
> simplify IRQ handling using regmap-irq.
>
> Signed-off-by: Robert Baldyga <r.baldyga@...sung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
> Acked-by: Bryan Wu <cooloney@...il.com>
> Acked-by: Lee Jones <lee.jones@...aro.org>
> Acked-by: Sebastian Reichel <sre@...nel.org>
> Acked-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
> [k.kozlowski: Collect acks, rebase on v4.6-rc6]
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> Acked-by: Jacek Anaszewski <j.anaszewski@...sung.com>
> ---
> drivers/extcon/extcon-max8997.c | 31 ++++----
> drivers/input/misc/max8997_haptic.c | 34 ++++----
> drivers/leds/leds-max8997.c | 13 ++--
> drivers/mfd/Kconfig | 1 +
> drivers/mfd/max8997-irq.c | 64 ++++++---------
> drivers/mfd/max8997.c | 141 +++++++++++++++-------------------
> drivers/power/max8997_charger.c | 33 ++++----
> drivers/regulator/max8997-regulator.c | 87 ++++++++++-----------
> drivers/rtc/rtc-max8997.c | 56 ++++++++------
> include/linux/mfd/max8997-private.h | 17 ++--
> 10 files changed, 228 insertions(+), 249 deletions(-)
>
> diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
> index 9a89320d09a8..fc812257bfc7 100644
> --- a/drivers/extcon/extcon-max8997.c
> +++ b/drivers/extcon/extcon-max8997.c
> @@ -27,6 +27,7 @@
> #include <linux/mfd/max8997-private.h>
> #include <linux/extcon.h>
> #include <linux/irqdomain.h>
> +#include <linux/regmap.h>
>
> #define DEV_NAME "max8997-muic"
> #define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
> @@ -116,7 +117,7 @@ enum max8997_muic_charger_type {
>
> struct max8997_muic_info {
> struct device *dev;
> - struct i2c_client *muic;
> + struct max8997_dev *max8997;
> struct extcon_dev *edev;
> int prev_cable_type;
> int prev_chg_type;
> @@ -174,10 +175,10 @@ static int max8997_muic_set_debounce_time(struct max8997_muic_info *info,
> case ADC_DEBOUNCE_TIME_10MS:
> case ADC_DEBOUNCE_TIME_25MS:
> case ADC_DEBOUNCE_TIME_38_62MS:
> - ret = max8997_update_reg(info->muic,
> + ret = regmap_update_bits(info->max8997->regmap_muic,
> MAX8997_MUIC_REG_CONTROL3,
> - time << CONTROL3_ADCDBSET_SHIFT,
> - CONTROL3_ADCDBSET_MASK);
> + CONTROL3_ADCDBSET_MASK,
> + time << CONTROL3_ADCDBSET_SHIFT);
> if (ret) {
> dev_err(info->dev, "failed to set ADC debounce time\n");
> return ret;
> @@ -212,8 +213,8 @@ static int max8997_muic_set_path(struct max8997_muic_info *info,
> else
> ctrl1 = CONTROL1_SW_OPEN;
>
> - ret = max8997_update_reg(info->muic,
> - MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK);
> + ret = regmap_update_bits(info->max8997->regmap_muic,
> + MAX8997_MUIC_REG_CONTROL1, COMP_SW_MASK, ctrl1);
> if (ret < 0) {
> dev_err(info->dev, "failed to update MUIC register\n");
> return ret;
> @@ -224,9 +225,9 @@ static int max8997_muic_set_path(struct max8997_muic_info *info,
> else
> ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
>
> - ret = max8997_update_reg(info->muic,
> - MAX8997_MUIC_REG_CONTROL2, ctrl2,
> - CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
> + ret = regmap_update_bits(info->max8997->regmap_muic,
> + MAX8997_MUIC_REG_CONTROL2,
> + CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
> if (ret < 0) {
> dev_err(info->dev, "failed to update MUIC register\n");
> return ret;
> @@ -530,8 +531,8 @@ static void max8997_muic_irq_work(struct work_struct *work)
> if (info->irq == muic_irqs[i].virq)
> irq_type = muic_irqs[i].irq;
>
> - ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
> - 2, info->status);
> + ret = regmap_bulk_read(info->max8997->regmap_muic,
> + MAX8997_MUIC_REG_STATUS1, info->status, 2);
> if (ret) {
> dev_err(info->dev, "failed to read muic register\n");
> mutex_unlock(&info->mutex);
> @@ -590,8 +591,8 @@ static int max8997_muic_detect_dev(struct max8997_muic_info *info)
> mutex_lock(&info->mutex);
>
> /* Read STATUSx register to detect accessory */
> - ret = max8997_bulk_read(info->muic,
> - MAX8997_MUIC_REG_STATUS1, 2, info->status);
> + ret = regmap_bulk_read(info->max8997->regmap_muic,
> + MAX8997_MUIC_REG_STATUS1, info->status, 2);
> if (ret) {
> dev_err(info->dev, "failed to read MUIC register\n");
> mutex_unlock(&info->mutex);
> @@ -650,7 +651,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> info->dev = &pdev->dev;
> - info->muic = max8997->muic;
> + info->max8997 = max8997;
>
> platform_set_drvdata(pdev, info);
> mutex_init(&info->mutex);
> @@ -700,7 +701,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
>
> /* Initialize registers according to platform data */
> for (i = 0; i < muic_pdata->num_init_data; i++) {
> - max8997_write_reg(info->muic,
> + regmap_write(info->max8997->regmap_muic,
> muic_pdata->init_data[i].addr,
> muic_pdata->init_data[i].data);
> }
> diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c
> index 99bc762881d5..b1c81cdde240 100644
> --- a/drivers/input/misc/max8997_haptic.c
> +++ b/drivers/input/misc/max8997_haptic.c
> @@ -31,6 +31,7 @@
> #include <linux/mfd/max8997-private.h>
> #include <linux/mfd/max8997.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/regmap.h>
>
> /* Haptic configuration 2 register */
> #define MAX8997_MOTOR_TYPE_SHIFT 7
> @@ -45,7 +46,7 @@
>
> struct max8997_haptic {
> struct device *dev;
> - struct i2c_client *client;
> + struct max8997_dev *max8997;
> struct input_dev *input_dev;
> struct regulator *regulator;
>
> @@ -86,19 +87,19 @@ static int max8997_haptic_set_duty_cycle(struct max8997_haptic *chip)
> }
> switch (chip->internal_mode_pattern) {
> case 0:
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGPWMDC1, duty_index);
> break;
> case 1:
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGPWMDC2, duty_index);
> break;
> case 2:
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGPWMDC3, duty_index);
> break;
> case 3:
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGPWMDC4, duty_index);
> break;
> default:
> @@ -115,50 +116,51 @@ static void max8997_haptic_configure(struct max8997_haptic *chip)
> value = chip->type << MAX8997_MOTOR_TYPE_SHIFT |
> chip->enabled << MAX8997_ENABLE_SHIFT |
> chip->mode << MAX8997_MODE_SHIFT | chip->pwm_divisor;
> - max8997_write_reg(chip->client, MAX8997_HAPTIC_REG_CONF2, value);
> + regmap_write(chip->max8997->regmap_haptic,
> + MAX8997_HAPTIC_REG_CONF2, value);
>
> if (chip->mode == MAX8997_INTERNAL_MODE && chip->enabled) {
> value = chip->internal_mode_pattern << MAX8997_CYCLE_SHIFT |
> chip->internal_mode_pattern << MAX8997_SIG_PERIOD_SHIFT |
> chip->internal_mode_pattern << MAX8997_SIG_DUTY_SHIFT |
> chip->internal_mode_pattern << MAX8997_PWM_DUTY_SHIFT;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_DRVCONF, value);
>
> switch (chip->internal_mode_pattern) {
> case 0:
> value = chip->pattern_cycle << 4;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_CYCLECONF1, value);
> value = chip->pattern_signal_period;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGCONF1, value);
> break;
>
> case 1:
> value = chip->pattern_cycle;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_CYCLECONF1, value);
> value = chip->pattern_signal_period;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGCONF2, value);
> break;
>
> case 2:
> value = chip->pattern_cycle << 4;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_CYCLECONF2, value);
> value = chip->pattern_signal_period;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGCONF3, value);
> break;
>
> case 3:
> value = chip->pattern_cycle;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_CYCLECONF2, value);
> value = chip->pattern_signal_period;
> - max8997_write_reg(chip->client,
> + regmap_write(chip->max8997->regmap_haptic,
> MAX8997_HAPTIC_REG_SIGCONF4, value);
> break;
>
> @@ -279,7 +281,7 @@ static int max8997_haptic_probe(struct platform_device *pdev)
> INIT_WORK(&chip->work, max8997_haptic_play_effect_work);
> mutex_init(&chip->mutex);
>
> - chip->client = iodev->haptic;
> + chip->max8997 = iodev;
> chip->dev = &pdev->dev;
> chip->input_dev = input_dev;
> chip->pwm_period = haptic_pdata->pwm_period;
> diff --git a/drivers/leds/leds-max8997.c b/drivers/leds/leds-max8997.c
> index 4edf74f1d6d4..e5f0dc2e9edf 100644
> --- a/drivers/leds/leds-max8997.c
> +++ b/drivers/leds/leds-max8997.c
> @@ -17,6 +17,7 @@
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> #include <linux/platform_device.h>
> +#include <linux/regmap.h>
>
> #define MAX8997_LED_FLASH_SHIFT 3
> #define MAX8997_LED_FLASH_CUR_MASK 0xf8
> @@ -52,7 +53,6 @@ static void max8997_led_set_mode(struct max8997_led *led,
> enum max8997_led_mode mode)
> {
> int ret;
> - struct i2c_client *client = led->iodev->i2c;
> u8 mask = 0, val;
>
> switch (mode) {
> @@ -88,8 +88,8 @@ static void max8997_led_set_mode(struct max8997_led *led,
> }
>
> if (mask) {
> - ret = max8997_update_reg(client, MAX8997_REG_LEN_CNTL, val,
> - mask);
> + ret = regmap_update_bits(led->iodev->regmap,
> + MAX8997_REG_LEN_CNTL, mask, val);
> if (ret)
> dev_err(led->iodev->dev,
> "failed to update register(%d)\n", ret);
> @@ -101,7 +101,6 @@ static void max8997_led_set_mode(struct max8997_led *led,
> static void max8997_led_enable(struct max8997_led *led, bool enable)
> {
> int ret;
> - struct i2c_client *client = led->iodev->i2c;
> u8 val = 0, mask = MAX8997_LED_BOOST_ENABLE_MASK;
>
> if (led->enabled == enable)
> @@ -109,7 +108,8 @@ static void max8997_led_enable(struct max8997_led *led, bool enable)
>
> val = enable ? MAX8997_LED_BOOST_ENABLE_MASK : 0;
>
> - ret = max8997_update_reg(client, MAX8997_REG_BOOST_CNTL, val, mask);
> + ret = regmap_update_bits(led->iodev->regmap,
> + MAX8997_REG_BOOST_CNTL, mask, val);
> if (ret)
> dev_err(led->iodev->dev,
> "failed to update register(%d)\n", ret);
> @@ -121,7 +121,6 @@ static void max8997_led_set_current(struct max8997_led *led,
> enum led_brightness value)
> {
> int ret;
> - struct i2c_client *client = led->iodev->i2c;
> u8 val = 0, mask = 0, reg = 0;
>
> switch (led->led_mode) {
> @@ -142,7 +141,7 @@ static void max8997_led_set_current(struct max8997_led *led,
> }
>
> if (mask) {
> - ret = max8997_update_reg(client, reg, val, mask);
> + ret = regmap_update_bits(led->iodev->regmap, reg, mask, val);
> if (ret)
> dev_err(led->iodev->dev,
> "failed to update register(%d)\n", ret);
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601de5bc..d7c6491ce3b9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -621,6 +621,7 @@ config MFD_MAX8997
> bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
> depends on I2C=y
> select MFD_CORE
> + select REGMAP_I2C
> select IRQ_DOMAIN
> help
> Say yes here to add support for Maxim Semiconductor MAX8997/8966.
> diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c
> index b95a46d79b9d..6ab5f955c510 100644
> --- a/drivers/mfd/max8997-irq.c
> +++ b/drivers/mfd/max8997-irq.c
> @@ -26,6 +26,7 @@
> #include <linux/interrupt.h>
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> +#include <linux/regmap.h>
>
> static const u8 max8997_mask_reg[] = {
> [PMIC_INT1] = MAX8997_REG_INT1MSK,
> @@ -41,25 +42,6 @@ static const u8 max8997_mask_reg[] = {
> [FLASH_STATUS] = MAX8997_REG_INVALID,
> };
>
> -static struct i2c_client *get_i2c(struct max8997_dev *max8997,
> - enum max8997_irq_source src)
> -{
> - switch (src) {
> - case PMIC_INT1 ... PMIC_INT4:
> - return max8997->i2c;
> - case FUEL_GAUGE:
> - return NULL;
> - case MUIC_INT1 ... MUIC_INT3:
> - return max8997->muic;
> - case GPIO_LOW ... GPIO_HI:
> - return max8997->i2c;
> - case FLASH_STATUS:
> - return max8997->i2c;
> - default:
> - return ERR_PTR(-EINVAL);
> - }
> -}
> -
> struct max8997_irq_data {
> int mask;
> enum max8997_irq_source group;
> @@ -124,15 +106,20 @@ static void max8997_irq_sync_unlock(struct irq_data *data)
> int i;
>
> for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
> + struct regmap *map;
> u8 mask_reg = max8997_mask_reg[i];
> - struct i2c_client *i2c = get_i2c(max8997, i);
> +
> + if (i >= MUIC_INT1 && i <= MUIC_INT3)
> + map = max8997->regmap_muic;
> + else
> + map = max8997->regmap;
>
> if (mask_reg == MAX8997_REG_INVALID ||
> - IS_ERR_OR_NULL(i2c))
> + IS_ERR_OR_NULL(map))
> continue;
> max8997->irq_masks_cache[i] = max8997->irq_masks_cur[i];
>
> - max8997_write_reg(i2c, max8997_mask_reg[i],
> + regmap_write(map, max8997_mask_reg[i],
> max8997->irq_masks_cur[i]);
> }
>
> @@ -180,11 +167,11 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> {
> struct max8997_dev *max8997 = data;
> u8 irq_reg[MAX8997_IRQ_GROUP_NR] = {};
> - u8 irq_src;
> + unsigned int irq_src;
> int ret;
> int i, cur_irq;
>
> - ret = max8997_read_reg(max8997->i2c, MAX8997_REG_INTSRC, &irq_src);
> + ret = regmap_read(max8997->regmap, MAX8997_REG_INTSRC, &irq_src);
> if (ret < 0) {
> dev_err(max8997->dev, "Failed to read interrupt source: %d\n",
> ret);
> @@ -193,8 +180,8 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
>
> if (irq_src & MAX8997_IRQSRC_PMIC) {
> /* PMIC INT1 ~ INT4 */
> - max8997_bulk_read(max8997->i2c, MAX8997_REG_INT1, 4,
> - &irq_reg[PMIC_INT1]);
> + regmap_bulk_read(max8997->regmap, MAX8997_REG_INT1,
> + &irq_reg[PMIC_INT1], 4);
> }
> if (irq_src & MAX8997_IRQSRC_FUELGAUGE) {
> /*
> @@ -214,8 +201,8 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> }
> if (irq_src & MAX8997_IRQSRC_MUIC) {
> /* MUIC INT1 ~ INT3 */
> - max8997_bulk_read(max8997->muic, MAX8997_MUIC_REG_INT1, 3,
> - &irq_reg[MUIC_INT1]);
> + regmap_bulk_read(max8997->regmap_muic, MAX8997_MUIC_REG_INT1,
> + &irq_reg[MUIC_INT1], 3);
> }
> if (irq_src & MAX8997_IRQSRC_GPIO) {
> /* GPIO Interrupt */
> @@ -224,8 +211,8 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> irq_reg[GPIO_LOW] = 0;
> irq_reg[GPIO_HI] = 0;
>
> - max8997_bulk_read(max8997->i2c, MAX8997_REG_GPIOCNTL1,
> - MAX8997_NUM_GPIO, gpio_info);
> + regmap_bulk_read(max8997->regmap, MAX8997_REG_GPIOCNTL1,
> + gpio_info, MAX8997_NUM_GPIO);
> for (i = 0; i < MAX8997_NUM_GPIO; i++) {
> bool interrupt = false;
>
> @@ -259,8 +246,10 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
> }
> if (irq_src & MAX8997_IRQSRC_FLASH) {
> /* Flash Status Interrupt */
> - ret = max8997_read_reg(max8997->i2c, MAX8997_REG_FLASHSTATUS,
> - &irq_reg[FLASH_STATUS]);
> + unsigned int data;
> + ret = regmap_read(max8997->regmap,
> + MAX8997_REG_FLASHSTATUS, &data);
> + irq_reg[FLASH_STATUS] = data;
> }
>
> /* Apply masking */
> @@ -308,7 +297,7 @@ int max8997_irq_init(struct max8997_dev *max8997)
> struct irq_domain *domain;
> int i;
> int ret;
> - u8 val;
> + unsigned int val;
>
> if (!max8997->irq) {
> dev_warn(max8997->dev, "No interrupt specified.\n");
> @@ -319,22 +308,19 @@ int max8997_irq_init(struct max8997_dev *max8997)
>
> /* Mask individual interrupt sources */
> for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
> - struct i2c_client *i2c;
> -
> max8997->irq_masks_cur[i] = 0xff;
> max8997->irq_masks_cache[i] = 0xff;
> - i2c = get_i2c(max8997, i);
>
> - if (IS_ERR_OR_NULL(i2c))
> + if (IS_ERR_OR_NULL(max8997->regmap))
> continue;
> if (max8997_mask_reg[i] == MAX8997_REG_INVALID)
> continue;
>
> - max8997_write_reg(i2c, max8997_mask_reg[i], 0xff);
> + regmap_write(max8997->regmap, max8997_mask_reg[i], 0xff);
> }
>
> for (i = 0; i < MAX8997_NUM_GPIO; i++) {
> - max8997->gpio_status[i] = (max8997_read_reg(max8997->i2c,
> + max8997->gpio_status[i] = (regmap_read(max8997->regmap,
> MAX8997_REG_GPIOCNTL1 + i,
> &val)
> & MAX8997_GPIO_DATA_MASK) ?
> diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
> index f316348e3d98..f1c82110b2ab 100644
> --- a/drivers/mfd/max8997.c
> +++ b/drivers/mfd/max8997.c
> @@ -33,6 +33,7 @@
> #include <linux/mfd/core.h>
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> +#include <linux/regmap.h>
>
> #define I2C_ADDR_PMIC (0xCC >> 1)
> #define I2C_ADDR_MUIC (0x4A >> 1)
> @@ -58,81 +59,29 @@ static const struct of_device_id max8997_pmic_dt_match[] = {
> MODULE_DEVICE_TABLE(of, max8997_pmic_dt_match);
> #endif
>
> -int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_byte_data(i2c, reg);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> -
> - ret &= 0xff;
> - *dest = ret;
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(max8997_read_reg);
> -
> -int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> -
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(max8997_bulk_read);
> -
> -int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_write_byte_data(i2c, reg, value);
> - mutex_unlock(&max8997->iolock);
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(max8997_write_reg);
> -
> -int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> +static const struct regmap_config max8997_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_REG_PMIC_END,
> +};
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_write_i2c_block_data(i2c, reg, count, buf);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> +static const struct regmap_config max8997_regmap_rtc_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_RTC_REG_END,
> +};
>
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(max8997_bulk_write);
> +static const struct regmap_config max8997_regmap_haptic_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_HAPTIC_REG_END,
> +};
>
> -int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
> -{
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> - int ret;
> -
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_byte_data(i2c, reg);
> - if (ret >= 0) {
> - u8 old_val = ret & 0xff;
> - u8 new_val = (val & mask) | (old_val & (~mask));
> - ret = i2c_smbus_write_byte_data(i2c, reg, new_val);
> - }
> - mutex_unlock(&max8997->iolock);
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(max8997_update_reg);
> +static const struct regmap_config max8997_regmap_muic_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_MUIC_REG_END,
> +};
>
> /*
> * Only the common platform data elements for max8997 are parsed here from the
> @@ -231,6 +180,41 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
> }
> i2c_set_clientdata(max8997->muic, max8997);
>
> + max8997->regmap = devm_regmap_init_i2c(i2c, &max8997_regmap_config);
> + if (IS_ERR(max8997->regmap)) {
> + ret = PTR_ERR(max8997->regmap);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + return ret;
> + }
> +
> + max8997->regmap_rtc = devm_regmap_init_i2c(max8997->rtc,
> + &max8997_regmap_rtc_config);
> + if (IS_ERR(max8997->regmap_rtc)) {
> + ret = PTR_ERR(max8997->regmap_rtc);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + goto err_regmap;
> + }
> +
> + max8997->regmap_haptic = devm_regmap_init_i2c(max8997->haptic,
> + &max8997_regmap_haptic_config);
> + if (IS_ERR(max8997->regmap_haptic)) {
> + ret = PTR_ERR(max8997->regmap_haptic);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + goto err_regmap;
> + }
> +
> + max8997->regmap_muic = devm_regmap_init_i2c(max8997->muic,
> + &max8997_regmap_muic_config);
> + if (IS_ERR(max8997->regmap_muic)) {
> + ret = PTR_ERR(max8997->regmap_muic);
> + dev_err(max8997->dev,
> + "failed to allocate register map: %d\n", ret);
> + goto err_regmap;
> + }
> +
> pm_runtime_set_active(max8997->dev);
>
> max8997_irq_init(max8997);
> @@ -255,6 +239,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>
> err_mfd:
> mfd_remove_devices(max8997->dev);
> +err_regmap:
> i2c_unregister_device(max8997->muic);
> err_i2c_muic:
> i2c_unregister_device(max8997->haptic);
> @@ -442,15 +427,15 @@ static int max8997_freeze(struct device *dev)
> int i;
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_pmic[i],
> + regmap_read(max8997->regmap, max8997_dumpaddr_pmic[i],
> &max8997->reg_dump[i]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_muic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_muic[i],
> + regmap_read(max8997->regmap_muic, max8997_dumpaddr_muic[i],
> &max8997->reg_dump[i + MAX8997_REG_PMIC_END]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_haptic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_haptic[i],
> + regmap_read(max8997->regmap_haptic, max8997_dumpaddr_haptic[i],
> &max8997->reg_dump[i + MAX8997_REG_PMIC_END +
> MAX8997_MUIC_REG_END]);
>
> @@ -464,15 +449,15 @@ static int max8997_restore(struct device *dev)
> int i;
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_pmic[i],
> + regmap_write(max8997->regmap, max8997_dumpaddr_pmic[i],
> max8997->reg_dump[i]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_muic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_muic[i],
> + regmap_write(max8997->regmap_muic, max8997_dumpaddr_muic[i],
> max8997->reg_dump[i + MAX8997_REG_PMIC_END]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_haptic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_haptic[i],
> + regmap_write(max8997->regmap_haptic, max8997_dumpaddr_haptic[i],
> max8997->reg_dump[i + MAX8997_REG_PMIC_END +
> MAX8997_MUIC_REG_END]);
>
> diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c
> index 0b2eab571528..a9f5ddcf83a8 100644
> --- a/drivers/power/max8997_charger.c
> +++ b/drivers/power/max8997_charger.c
> @@ -26,6 +26,7 @@
> #include <linux/power_supply.h>
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> +#include <linux/regmap.h>
>
> struct charger_data {
> struct device *dev;
> @@ -45,14 +46,14 @@ static int max8997_battery_get_property(struct power_supply *psy,
> union power_supply_propval *val)
> {
> struct charger_data *charger = power_supply_get_drvdata(psy);
> - struct i2c_client *i2c = charger->iodev->i2c;
> int ret;
> - u8 reg;
> + unsigned int reg;
>
> switch (psp) {
> case POWER_SUPPLY_PROP_STATUS:
> val->intval = 0;
> - ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
> + ret = regmap_read(charger->iodev->regmap,
> + MAX8997_REG_STATUS4, ®);
> if (ret)
> return ret;
> if ((reg & (1 << 0)) == 0x1)
> @@ -61,7 +62,8 @@ static int max8997_battery_get_property(struct power_supply *psy,
> break;
> case POWER_SUPPLY_PROP_PRESENT:
> val->intval = 0;
> - ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
> + ret = regmap_read(charger->iodev->regmap,
> + MAX8997_REG_STATUS4, ®);
> if (ret)
> return ret;
> if ((reg & (1 << 2)) == 0x0)
> @@ -70,7 +72,8 @@ static int max8997_battery_get_property(struct power_supply *psy,
> break;
> case POWER_SUPPLY_PROP_ONLINE:
> val->intval = 0;
> - ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
> + ret = regmap_read(charger->iodev->regmap,
> + MAX8997_REG_STATUS4, ®);
> if (ret)
> return ret;
> /* DCINOK */
> @@ -111,8 +114,8 @@ static int max8997_battery_probe(struct platform_device *pdev)
> if (val > 0xf)
> val = 0xf;
>
> - ret = max8997_update_reg(iodev->i2c,
> - MAX8997_REG_MBCCTRL5, val, 0xf);
> + ret = regmap_update_bits(iodev->regmap,
> + MAX8997_REG_MBCCTRL5, 0xf, val);
> if (ret < 0) {
> dev_err(&pdev->dev, "Cannot use i2c bus.\n");
> return ret;
> @@ -121,20 +124,20 @@ static int max8997_battery_probe(struct platform_device *pdev)
>
> switch (pdata->timeout) {
> case 5:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x2 << 4, 0x7 << 4);
> + ret = regmap_update_bits(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x7 << 4, 0x2 << 4);
> break;
> case 6:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x3 << 4, 0x7 << 4);
> + ret = regmap_update_bits(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x7 << 4, 0x3 << 4);
> break;
> case 7:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x4 << 4, 0x7 << 4);
> + ret = regmap_update_bits(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x7 << 4, 0x4 << 4);
> break;
> case 0:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x7 << 4, 0x7 << 4);
> + ret = regmap_update_bits(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x7 << 4, 0x7 << 4);
> break;
> default:
> dev_err(&pdev->dev, "incorrect timeout value (%d)\n",
> diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
> index efabc0ea0e96..362d85a849d5 100644
> --- a/drivers/regulator/max8997-regulator.c
> +++ b/drivers/regulator/max8997-regulator.c
> @@ -33,6 +33,7 @@
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> #include <linux/regulator/of_regulator.h>
> +#include <linux/regmap.h>
>
> struct max8997_data {
> struct device *dev;
> @@ -50,7 +51,7 @@ struct max8997_data {
> int buck125_gpioindex;
> bool ignore_gpiodvs_side_effect;
>
> - u8 saved_states[MAX8997_REG_MAX];
> + unsigned int saved_states[MAX8997_REG_MAX];
> };
>
> static const unsigned int safeoutvolt[] = {
> @@ -257,15 +258,14 @@ static int max8997_get_enable_register(struct regulator_dev *rdev,
> static int max8997_reg_is_enabled(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
> - u8 val;
> + unsigned int val;
>
> ret = max8997_get_enable_register(rdev, ®, &mask, &pattern);
> if (ret)
> return ret;
>
> - ret = max8997_read_reg(i2c, reg, &val);
> + ret = regmap_read(max8997->iodev->regmap, reg, &val);
> if (ret)
> return ret;
>
> @@ -275,27 +275,25 @@ static int max8997_reg_is_enabled(struct regulator_dev *rdev)
> static int max8997_reg_enable(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
>
> ret = max8997_get_enable_register(rdev, ®, &mask, &pattern);
> if (ret)
> return ret;
>
> - return max8997_update_reg(i2c, reg, pattern, mask);
> + return regmap_update_bits(max8997->iodev->regmap, reg, mask, pattern);
> }
>
> static int max8997_reg_disable(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
>
> ret = max8997_get_enable_register(rdev, ®, &mask, &pattern);
> if (ret)
> return ret;
>
> - return max8997_update_reg(i2c, reg, ~pattern, mask);
> + return regmap_update_bits(max8997->iodev->regmap, reg, mask, ~pattern);
> }
>
> static int max8997_get_voltage_register(struct regulator_dev *rdev,
> @@ -367,15 +365,14 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev,
> static int max8997_get_voltage_sel(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int reg, shift, mask, ret;
> - u8 val;
> + unsigned int val;
>
> ret = max8997_get_voltage_register(rdev, ®, &shift, &mask);
> if (ret)
> return ret;
>
> - ret = max8997_read_reg(i2c, reg, &val);
> + ret = regmap_read(max8997->iodev->regmap, reg, &val);
> if (ret)
> return ret;
>
> @@ -412,7 +409,6 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
> int min_uV, int max_uV, unsigned *selector)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int rid = rdev_get_id(rdev);
> int lb, ub;
> int reg, shift = 0, mask, ret = 0;
> @@ -454,7 +450,8 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
>
> *selector = val;
>
> - ret = max8997_update_reg(i2c, reg, val << shift, mask);
> + ret = regmap_update_bits(max8997->iodev->regmap,
> + reg, mask, val << shift);
>
> return ret;
> }
> @@ -467,7 +464,6 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
> int min_uV, int max_uV, unsigned *selector)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> const struct voltage_map_desc *desc;
> int rid = rdev_get_id(rdev);
> int i, reg, shift, mask, ret;
> @@ -499,7 +495,8 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
> if (ret)
> return ret;
>
> - ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
> + ret = regmap_update_bits(max8997->iodev->regmap,
> + reg, mask << shift, i << shift);
> *selector = i;
>
> return ret;
> @@ -709,7 +706,6 @@ static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
> unsigned selector)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int rid = rdev_get_id(rdev);
> int reg, shift = 0, mask, ret;
>
> @@ -720,13 +716,13 @@ static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
> if (ret)
> return ret;
>
> - return max8997_update_reg(i2c, reg, selector << shift, mask << shift);
> + return regmap_update_bits(max8997->iodev->regmap,
> + reg, mask << shift, selector << shift);
> }
>
> static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
> int rid = rdev_get_id(rdev);
>
> @@ -734,20 +730,22 @@ static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
> if (ret)
> return ret;
>
> - max8997_read_reg(i2c, reg, &max8997->saved_states[rid]);
> + regmap_read(max8997->iodev->regmap,
> + reg, &max8997->saved_states[rid]);
>
> if (rid == MAX8997_LDO1 ||
> rid == MAX8997_LDO10 ||
> rid == MAX8997_LDO21) {
> dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n",
> rdev->desc->name);
> - return max8997_update_reg(i2c, reg, 0x40, mask);
> + return regmap_update_bits(max8997->iodev->regmap,
> + reg, mask, 0x40);
> }
>
> dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n",
> rdev->desc->name, max8997->saved_states[rid] & mask,
> (~pattern) & mask);
> - return max8997_update_reg(i2c, reg, ~pattern, mask);
> + return regmap_update_bits(max8997->iodev->regmap, reg, mask, ~pattern);
> }
>
> static struct regulator_ops max8997_ldo_ops = {
> @@ -1031,7 +1029,6 @@ static int max8997_pmic_probe(struct platform_device *pdev)
> struct regulator_config config = { };
> struct regulator_dev *rdev;
> struct max8997_data *max8997;
> - struct i2c_client *i2c;
> int i, ret, nr_dvs;
> u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
>
> @@ -1055,7 +1052,6 @@ static int max8997_pmic_probe(struct platform_device *pdev)
> max8997->iodev = iodev;
> max8997->num_regulators = pdata->num_regulators;
> platform_set_drvdata(pdev, max8997);
> - i2c = max8997->iodev->i2c;
>
> max8997->buck125_gpioindex = pdata->buck125_default_idx;
> max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
> @@ -1105,25 +1101,25 @@ static int max8997_pmic_probe(struct platform_device *pdev)
>
> /* For the safety, set max voltage before setting up */
> for (i = 0; i < 8; i++) {
> - max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
> - max_buck1, 0x3f);
> - max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
> - max_buck2, 0x3f);
> - max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
> - max_buck5, 0x3f);
> + regmap_update_bits(max8997->iodev->regmap,
> + MAX8997_REG_BUCK1DVS1 + i, 0x3f, max_buck1);
> + regmap_update_bits(max8997->iodev->regmap,
> + MAX8997_REG_BUCK2DVS1 + i, 0x3f, max_buck2);
> + regmap_update_bits(max8997->iodev->regmap,
> + MAX8997_REG_BUCK5DVS1 + i, 0x3f, max_buck5);
> }
>
> /* Initialize all the DVS related BUCK registers */
> for (i = 0; i < nr_dvs; i++) {
> - max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
> - max8997->buck1_vol[i],
> - 0x3f);
> - max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
> - max8997->buck2_vol[i],
> - 0x3f);
> - max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
> - max8997->buck5_vol[i],
> - 0x3f);
> + regmap_update_bits(max8997->iodev->regmap,
> + MAX8997_REG_BUCK1DVS1 + i,
> + 0x3f, max8997->buck1_vol[i]);
> + regmap_update_bits(max8997->iodev->regmap,
> + MAX8997_REG_BUCK2DVS1 + i,
> + 0x3f, max8997->buck2_vol[i]);
> + regmap_update_bits(max8997->iodev->regmap,
> + MAX8997_REG_BUCK5DVS1 + i,
> + 0x3f, max8997->buck5_vol[i]);
> }
>
> /*
> @@ -1167,16 +1163,17 @@ static int max8997_pmic_probe(struct platform_device *pdev)
> }
>
> /* DVS-GPIO disabled */
> - max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ?
> - (1 << 1) : (0 << 1), 1 << 1);
> - max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ?
> - (1 << 1) : (0 << 1), 1 << 1);
> - max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
> - (1 << 1) : (0 << 1), 1 << 1);
> + regmap_update_bits(max8997->iodev->regmap, MAX8997_REG_BUCK1CTRL,
> + 1 << 1, (pdata->buck1_gpiodvs) ? (1 << 1) : (0 << 1));
> + regmap_update_bits(max8997->iodev->regmap, MAX8997_REG_BUCK2CTRL,
> + 1 << 1, (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
> + regmap_update_bits(max8997->iodev->regmap, MAX8997_REG_BUCK5CTRL,
> + 1 << 1, (pdata->buck5_gpiodvs) ? (1 << 1) : (0 << 1));
>
> /* Misc Settings */
> max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
> - max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
> + regmap_write(max8997->iodev->regmap,
> + MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
>
> for (i = 0; i < pdata->num_regulators; i++) {
> const struct voltage_map_desc *desc;
> diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c
> index db984d4bf952..d017a34a9f70 100644
> --- a/drivers/rtc/rtc-max8997.c
> +++ b/drivers/rtc/rtc-max8997.c
> @@ -22,6 +22,7 @@
> #include <linux/platform_device.h>
> #include <linux/mfd/max8997-private.h>
> #include <linux/irqdomain.h>
> +#include <linux/regmap.h>
>
> /* Module parameter for WTSR function control */
> static int wtsr_en = 1;
> @@ -70,7 +71,6 @@ enum {
> struct max8997_rtc_info {
> struct device *dev;
> struct max8997_dev *max8997;
> - struct i2c_client *rtc;
> struct rtc_device *rtc_dev;
> struct mutex lock;
> int virq;
> @@ -120,8 +120,8 @@ static inline int max8997_rtc_set_update_reg(struct max8997_rtc_info *info)
> {
> int ret;
>
> - ret = max8997_write_reg(info->rtc, MAX8997_RTC_UPDATE1,
> - RTC_UDR_MASK);
> + ret = regmap_write(info->max8997->regmap_rtc,
> + MAX8997_RTC_UPDATE1, RTC_UDR_MASK);
> if (ret < 0)
> dev_err(info->dev, "%s: fail to write update reg(%d)\n",
> __func__, ret);
> @@ -142,7 +142,8 @@ static int max8997_rtc_read_time(struct device *dev, struct rtc_time *tm)
> int ret;
>
> mutex_lock(&info->lock);
> - ret = max8997_bulk_read(info->rtc, MAX8997_RTC_SEC, RTC_NR_TIME, data);
> + ret = regmap_bulk_read(info->max8997->regmap_rtc,
> + MAX8997_RTC_SEC, data, RTC_NR_TIME);
> mutex_unlock(&info->lock);
>
> if (ret < 0) {
> @@ -168,7 +169,8 @@ static int max8997_rtc_set_time(struct device *dev, struct rtc_time *tm)
>
> mutex_lock(&info->lock);
>
> - ret = max8997_bulk_write(info->rtc, MAX8997_RTC_SEC, RTC_NR_TIME, data);
> + ret = regmap_bulk_write(info->max8997->regmap_rtc,
> + MAX8997_RTC_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__,
> ret);
> @@ -185,13 +187,13 @@ static int max8997_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> {
> struct max8997_rtc_info *info = dev_get_drvdata(dev);
> u8 data[RTC_NR_TIME];
> - u8 val;
> + unsigned int val;
> int i, ret;
>
> mutex_lock(&info->lock);
>
> - ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
> - data);
> + ret = regmap_bulk_read(info->max8997->regmap_rtc,
> + MAX8997_RTC_ALARM1_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n",
> __func__, __LINE__, ret);
> @@ -209,7 +211,8 @@ static int max8997_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> }
>
> alrm->pending = 0;
> - ret = max8997_read_reg(info->max8997->i2c, MAX8997_REG_STATUS1, &val);
> + ret = regmap_read(info->max8997->regmap_rtc,
> + MAX8997_REG_STATUS1, &val);
> if (ret < 0) {
> dev_err(info->dev, "%s:%d fail to read status1 reg(%d)\n",
> __func__, __LINE__, ret);
> @@ -232,8 +235,8 @@ static int max8997_rtc_stop_alarm(struct max8997_rtc_info *info)
> if (!mutex_is_locked(&info->lock))
> dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
>
> - ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
> - data);
> + ret = regmap_bulk_read(info->max8997->regmap_rtc,
> + MAX8997_RTC_ALARM1_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
> __func__, ret);
> @@ -243,8 +246,8 @@ static int max8997_rtc_stop_alarm(struct max8997_rtc_info *info)
> for (i = 0; i < RTC_NR_TIME; i++)
> data[i] &= ~ALARM_ENABLE_MASK;
>
> - ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
> - data);
> + ret = regmap_bulk_write(info->max8997->regmap_rtc,
> + MAX8997_RTC_ALARM1_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
> __func__, ret);
> @@ -264,8 +267,8 @@ static int max8997_rtc_start_alarm(struct max8997_rtc_info *info)
> if (!mutex_is_locked(&info->lock))
> dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
>
> - ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
> - data);
> + ret = regmap_bulk_read(info->max8997->regmap_rtc,
> + MAX8997_RTC_ALARM1_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
> __func__, ret);
> @@ -283,8 +286,8 @@ static int max8997_rtc_start_alarm(struct max8997_rtc_info *info)
> if (data[RTC_DATE] & 0x1f)
> data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
>
> - ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
> - data);
> + ret = regmap_bulk_write(info->max8997->regmap_rtc,
> + MAX8997_RTC_ALARM1_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
> __func__, ret);
> @@ -315,8 +318,8 @@ static int max8997_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> if (ret < 0)
> goto out;
>
> - ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
> - data);
> + ret = regmap_bulk_write(info->max8997->regmap_rtc,
> + MAX8997_RTC_ALARM1_SEC, data, RTC_NR_TIME);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
> __func__, ret);
> @@ -387,7 +390,8 @@ static void max8997_rtc_enable_wtsr(struct max8997_rtc_info *info, bool enable)
> dev_info(info->dev, "%s: %s WTSR\n", __func__,
> enable ? "enable" : "disable");
>
> - ret = max8997_update_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, val, mask);
> + ret = regmap_update_bits(info->max8997->regmap_rtc,
> + MAX8997_RTC_WTSR_SMPL, mask, val);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n",
> __func__, ret);
> @@ -400,7 +404,7 @@ static void max8997_rtc_enable_wtsr(struct max8997_rtc_info *info, bool enable)
> static void max8997_rtc_enable_smpl(struct max8997_rtc_info *info, bool enable)
> {
> int ret;
> - u8 val, mask;
> + unsigned int val, mask;
>
> if (!smpl_en)
> return;
> @@ -415,7 +419,8 @@ static void max8997_rtc_enable_smpl(struct max8997_rtc_info *info, bool enable)
> dev_info(info->dev, "%s: %s SMPL\n", __func__,
> enable ? "enable" : "disable");
>
> - ret = max8997_update_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, val, mask);
> + ret = regmap_update_bits(info->max8997->regmap_rtc,
> + MAX8997_RTC_WTSR_SMPL, mask, val);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n",
> __func__, ret);
> @@ -425,7 +430,8 @@ static void max8997_rtc_enable_smpl(struct max8997_rtc_info *info, bool enable)
> max8997_rtc_set_update_reg(info);
>
> val = 0;
> - max8997_read_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, &val);
> + regmap_read(info->max8997->regmap_rtc,
> + MAX8997_RTC_WTSR_SMPL, &val);
> pr_info("WTSR_SMPL(0x%02x)\n", val);
> }
>
> @@ -440,7 +446,8 @@ static int max8997_rtc_init_reg(struct max8997_rtc_info *info)
>
> info->rtc_24hr_mode = 1;
>
> - ret = max8997_bulk_write(info->rtc, MAX8997_RTC_CTRLMASK, 2, data);
> + ret = regmap_bulk_write(info->max8997->regmap_rtc,
> + MAX8997_RTC_CTRLMASK, data, 2);
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
> __func__, ret);
> @@ -465,7 +472,6 @@ static int max8997_rtc_probe(struct platform_device *pdev)
> mutex_init(&info->lock);
> info->dev = &pdev->dev;
> info->max8997 = max8997;
> - info->rtc = max8997->rtc;
>
> platform_set_drvdata(pdev, info);
>
> diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
> index 78c76cd4d37b..ea80ef80dbf8 100644
> --- a/include/linux/mfd/max8997-private.h
> +++ b/include/linux/mfd/max8997-private.h
> @@ -309,6 +309,8 @@ enum max8997_rtc_reg {
> MAX8997_RTC_ALARM2_MONTH = 0x22,
> MAX8997_RTC_ALARM2_YEAR = 0x23,
> MAX8997_RTC_ALARM2_DAY_OF_MONTH = 0x24,
> +
> + MAX8997_RTC_REG_END = 0x25,
> };
>
> enum max8997_irq_source {
> @@ -390,6 +392,11 @@ struct max8997_dev {
> unsigned long type;
> struct platform_device *battery; /* battery control (not fuel gauge) */
>
> + struct regmap *regmap;
> + struct regmap *regmap_rtc;
> + struct regmap *regmap_haptic;
> + struct regmap *regmap_muic;
> +
> int irq;
> int ono;
> struct irq_domain *irq_domain;
> @@ -398,7 +405,7 @@ struct max8997_dev {
> int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
>
> /* For hibernation */
> - u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END +
> + unsigned int reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END +
> MAX8997_HAPTIC_REG_END];
>
> bool gpio_status[MAX8997_NUM_GPIO];
> @@ -413,14 +420,6 @@ extern int max8997_irq_init(struct max8997_dev *max8997);
> extern void max8997_irq_exit(struct max8997_dev *max8997);
> extern int max8997_irq_resume(struct max8997_dev *max8997);
>
> -extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
> -extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count,
> - u8 *buf);
> -extern int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
> -extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count,
> - u8 *buf);
> -extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
> -
> #define MAX8997_GPIO_INT_BOTH (0x3 << 4)
> #define MAX8997_GPIO_INT_RISE (0x2 << 4)
> #define MAX8997_GPIO_INT_FALL (0x1 << 4)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists