| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1466153096.9422.34.camel@intel.com>
Date: Fri, 17 Jun 2016 16:44:56 +0800
From: Zhang Rui <rui.zhang@...el.com>
To: Eduardo Valentin <edubezval@...il.com>
Cc: Linux PM <linux-pm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, Keerthy <a0393675@...com>
Subject: Re: [PATCHv4 14/48] thermal: core: move trips attributes to
tz->device.groups
On 一, 2016-05-30 at 23:18 -0700, Eduardo Valentin wrote:
> Finally, move the last thermal zone sysfs attributes to
> tz->device.groups: trips attributes. This requires adding a
> attribute_group to thermal_zone_device, creating it dynamically, and
> then setting all trips attributes in it. The trips attribute is then
> added to the tz->device.groups.
>
> As the removal of all attributes are handled by device core, the
> device
> remove calls are not needed anymore.
>
> Cc: Zhang Rui <rui.zhang@...el.com>
> Cc: linux-pm@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Eduardo Valentin <edubezval@...il.com>
> ---
> drivers/thermal/thermal_core.c | 77 +++++++++++++++++++++-----------
> ----------
> include/linux/thermal.h | 2 ++
> 2 files changed, 41 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/thermal/thermal_core.c
> b/drivers/thermal/thermal_core.c
> index ba4f7a9..0b60b04 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -1188,8 +1188,9 @@ static const struct attribute_group
> *thermal_zone_attribute_groups[] = {
> */
> static int create_trip_attrs(struct thermal_zone_device *tz, int
> mask)
> {
> - int indx;
> int size = sizeof(struct thermal_attr) * tz->trips;
> + struct attribute **attrs;
> + int indx;
>
> tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
> if (!tz->trip_type_attrs)
> @@ -1210,6 +1211,15 @@ static int create_trip_attrs(struct
> thermal_zone_device *tz, int mask)
> }
> }
>
> + attrs = kzalloc(sizeof(*attrs) * tz->trips * 3 + 1,
> GFP_KERNEL);
> + if (!attrs) {
> + kfree(tz->trip_type_attrs);
> + kfree(tz->trip_temp_attrs);
> + if (tz->ops->get_trip_hyst)
> + kfree(tz->trip_hyst_attrs);
> + return -ENOMEM;
> + }
> +
> for (indx = 0; indx < tz->trips; indx++) {
> /* create trip type attribute */
> snprintf(tz->trip_type_attrs[indx].name,
> THERMAL_NAME_LENGTH,
> @@ -1220,9 +1230,7 @@ static int create_trip_attrs(struct
> thermal_zone_device *tz, int mask)
> tz-
> >trip_type_attrs[indx].name;
> tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
> tz->trip_type_attrs[indx].attr.show =
> trip_point_type_show;
> -
> - device_create_file(&tz->device,
> - &tz->trip_type_attrs[indx].attr);
> + attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
>
> /* create trip temp attribute */
> snprintf(tz->trip_temp_attrs[indx].name,
> THERMAL_NAME_LENGTH,
> @@ -1239,9 +1247,7 @@ static int create_trip_attrs(struct
> thermal_zone_device *tz, int mask)
> tz->trip_temp_attrs[indx].attr.store =
> trip_point_t
> emp_store;
> }
> -
> - device_create_file(&tz->device,
> - &tz->trip_temp_attrs[indx].attr);
> + attrs[indx + tz->trips] = &tz-
> >trip_temp_attrs[indx].attr.attr;
>
> /* create Optional trip hyst attribute */
> if (!tz->ops->get_trip_hyst)
> @@ -1259,45 +1265,38 @@ static int create_trip_attrs(struct
> thermal_zone_device *tz, int mask)
> tz->trip_hyst_attrs[indx].attr.store =
> trip_point_hyst_store;
> }
> -
> - device_create_file(&tz->device,
> - &tz->trip_hyst_attrs[indx].attr);
> + attrs[indx + tz->trips * 2] =
> + &tz-
> >trip_hyst_attrs[indx].attr.attr;
> }
> - return 0;
> -}
> + attrs[tz->trips * 3] = NULL;
why bother clearing it explicitly? kzalloc already handles this, right?
> -static void remove_trip_attrs(struct thermal_zone_device *tz)
> -{
> - int indx;
> + tz->trips_attribute_group.attrs = attrs;
>
> - for (indx = 0; indx < tz->trips; indx++) {
> - device_remove_file(&tz->device,
> - &tz->trip_type_attrs[indx].attr);
> - device_remove_file(&tz->device,
> - &tz->trip_temp_attrs[indx].attr);
> - if (tz->ops->get_trip_hyst)
> - device_remove_file(&tz->device,
> - &tz-
> >trip_hyst_attrs[indx].attr);
> - }
> - kfree(tz->trip_type_attrs);
> - kfree(tz->trip_temp_attrs);
> - kfree(tz->trip_hyst_attrs);
> + return 0;
> }
>
> -static int thermal_zone_create_device_groups(struct
> thermal_zone_device *tz)
> +static int thermal_zone_create_device_groups(struct
> thermal_zone_device *tz,
> + int mask)
> {
> const struct attribute_group **groups;
> - int i, size;
> + int i, size, result;
> +
> + result = create_trip_attrs(tz, mask);
> + if (result)
> + return result;
>
> - size = ARRAY_SIZE(thermal_zone_attribute_groups) + 1;
> + /* we need one extra for trips and the NULL to terminate the
> array */
> + size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2;
> /* This also takes care of API requirement to be NULL
> terminated */
> groups = kcalloc(size, sizeof(*groups), GFP_KERNEL);
> if (!groups)
> return -ENOMEM;
>
> - for (i = 0; i < size - 1; i++)
> + for (i = 0; i < size - 2; i++)
> groups[i] = thermal_zone_attribute_groups[i];
>
> + groups[size - 2] = &tz->trips_attribute_group;
> +
Problem is that, previously, create_trip_attrs() does not handle the
case that tz->trips == 0 good enough, it happens to not bring big
problem.
tz->trip_type_attrs/tz->trip_temp_attrs/tz->trip_hyst_attrs is set
to ZERO_SIZE_PTR when tz->trips equals 0, kfree() handles this.
But registering a sysfs group with one invalid attribute item is wrong.
And this causes oops in my machine when test_power driver, which has no
trip point, is unloaded. And maybe this is also the root cause of this
report http://www.spinics.net/lists/kernel/msg2280260.html
Attached is an updated version, which creates trip attributes only if
tz->trips > 0, which solves the problem for me.
>From e1e917e790b70b88bd418545a29b1eefa01a5566 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <edubezval@...il.com>
Date: Mon, 30 May 2016 23:18:21 -0700
Subject: [PATCH] thermal: core: move trips attributes to tz->device.groups
Finally, move the last thermal zone sysfs attributes to
tz->device.groups: trips attributes. This requires adding a
attribute_group to thermal_zone_device, creating it dynamically, and
then setting all trips attributes in it. The trips attribute is then
added to the tz->device.groups.
As the removal of all attributes are handled by device core, the device
remove calls are not needed anymore.
Cc: Zhang Rui <rui.zhang@...el.com>
Cc: linux-pm@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@...il.com>
Signed-off-by: Zhang Rui <rui.zhang@...el.com>
---
drivers/thermal/thermal_core.c | 78 ++++++++++++++++++++++--------------------
include/linux/thermal.h | 2 ++
2 files changed, 42 insertions(+), 38 deletions(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 657ba02..9926c89 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1188,8 +1188,9 @@ static const struct attribute_group *thermal_zone_attribute_groups[] = {
*/
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
- int indx;
int size = sizeof(struct thermal_attr) * tz->trips;
+ struct attribute **attrs;
+ int indx;
tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_type_attrs)
@@ -1210,6 +1211,15 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
}
}
+ attrs = kzalloc(sizeof(*attrs) * tz->trips * 3 + 1, GFP_KERNEL);
+ if (!attrs) {
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ if (tz->ops->get_trip_hyst)
+ kfree(tz->trip_hyst_attrs);
+ return -ENOMEM;
+ }
+
for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
@@ -1220,9 +1230,7 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
tz->trip_type_attrs[indx].name;
tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
-
- device_create_file(&tz->device,
- &tz->trip_type_attrs[indx].attr);
+ attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
@@ -1239,9 +1247,7 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
tz->trip_temp_attrs[indx].attr.store =
trip_point_temp_store;
}
-
- device_create_file(&tz->device,
- &tz->trip_temp_attrs[indx].attr);
+ attrs[indx + tz->trips] = &tz->trip_temp_attrs[indx].attr.attr;
/* create Optional trip hyst attribute */
if (!tz->ops->get_trip_hyst)
@@ -1259,45 +1265,39 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
tz->trip_hyst_attrs[indx].attr.store =
trip_point_hyst_store;
}
-
- device_create_file(&tz->device,
- &tz->trip_hyst_attrs[indx].attr);
+ attrs[indx + tz->trips * 2] =
+ &tz->trip_hyst_attrs[indx].attr.attr;
}
- return 0;
-}
+ attrs[tz->trips * 3] = NULL;
-static void remove_trip_attrs(struct thermal_zone_device *tz)
-{
- int indx;
+ tz->trips_attribute_group.attrs = attrs;
- for (indx = 0; indx < tz->trips; indx++) {
- device_remove_file(&tz->device,
- &tz->trip_type_attrs[indx].attr);
- device_remove_file(&tz->device,
- &tz->trip_temp_attrs[indx].attr);
- if (tz->ops->get_trip_hyst)
- device_remove_file(&tz->device,
- &tz->trip_hyst_attrs[indx].attr);
- }
- kfree(tz->trip_type_attrs);
- kfree(tz->trip_temp_attrs);
- kfree(tz->trip_hyst_attrs);
+ return 0;
}
-static int thermal_zone_create_device_groups(struct thermal_zone_device *tz)
+static int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
+ int mask)
{
const struct attribute_group **groups;
- int i, size;
+ int i, size, result;
- size = ARRAY_SIZE(thermal_zone_attribute_groups) + 1;
+ /* we need one extra for trips and the NULL to terminate the array */
+ size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2;
/* This also takes care of API requirement to be NULL terminated */
groups = kcalloc(size, sizeof(*groups), GFP_KERNEL);
if (!groups)
return -ENOMEM;
- for (i = 0; i < size - 1; i++)
+ for (i = 0; i < size - 2; i++)
groups[i] = thermal_zone_attribute_groups[i];
+ if (tz->trips) {
+ result = create_trip_attrs(tz, mask);
+ if (result)
+ return result;
+ groups[size - 2] = &tz->trips_attribute_group;
+ }
+
tz->device.groups = groups;
return 0;
@@ -1934,8 +1934,12 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
+ /* sys I/F */
/* Add nodes that are always present via .groups */
- thermal_zone_create_device_groups(tz);
+ result = thermal_zone_create_device_groups(tz, mask);
+ if (result)
+ goto unregister;
+
/* A new thermal zone needs to be updated anyway. */
atomic_set(&tz->need_update, 1);
@@ -1947,11 +1951,6 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
return ERR_PTR(result);
}
- /* sys I/F */
- result = create_trip_attrs(tz, mask);
- if (result)
- goto unregister;
-
for (count = 0; count < trips; count++) {
if (tz->ops->get_trip_type(tz, count, &trip_type))
set_bit(count, &tz->trips_disabled);
@@ -2056,7 +2055,10 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
thermal_zone_device_set_polling(tz, 0);
- remove_trip_attrs(tz);
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ kfree(tz->trip_hyst_attrs);
+ kfree(tz->trips_attribute_group.attrs);
thermal_set_governor(tz, NULL);
thermal_remove_hwmon_sysfs(tz);
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index ee517be..580809c 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -28,6 +28,7 @@
#include <linux/of.h>
#include <linux/idr.h>
#include <linux/device.h>
+#include <linux/sysfs.h>
#include <linux/workqueue.h>
#include <uapi/linux/thermal.h>
@@ -187,6 +188,7 @@ struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
+ struct attribute_group trips_attribute_group;
struct thermal_attr *trip_temp_attrs;
struct thermal_attr *trip_type_attrs;
struct thermal_attr *trip_hyst_attrs;
--
2.7.4
Powered by blists - more mailing lists