| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1466162780-12391-2-git-send-email-ravishankarkm32@gmail.com> Date: Fri, 17 Jun 2016 16:56:18 +0530 From: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@...il.com> To: abbotti@....co.uk, hsweeten@...ionengravers.com, gregkh@...uxfoundation.org Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org, ravishankarkm32@...il.com Subject: [PATCH 2/4] Staging: comedi: dt2815: Comment issue fixed This fixes up a WARNING: 'Block comments use a trailing */ on a separate line' found by the checkpatch.pl tool. Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@...il.com> --- drivers/staging/comedi/drivers/dt2815.c | 140 ++++++++++++++++---------------- 1 file changed, 70 insertions(+), 70 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c index fb08569..0be77cc 100644 --- a/drivers/staging/comedi/drivers/dt2815.c +++ b/drivers/staging/comedi/drivers/dt2815.c @@ -1,55 +1,55 @@ /* - comedi/drivers/dt2815.c - Hardware driver for Data Translation DT2815 - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 1999 Anders Blomdell <anders.blomdell@...trol.lth.se> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. + * comedi/drivers/dt2815.c + * Hardware driver for Data Translation DT2815 + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1999 Anders Blomdell <anders.blomdell@...trol.lth.se> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ /* -Driver: dt2815 -Description: Data Translation DT2815 -Author: ds -Status: mostly complete, untested -Devices: [Data Translation] DT2815 (dt2815) - -I'm not sure anyone has ever tested this board. If you have information -contrary, please update. - -Configuration options: - [0] - I/O port base base address - [1] - IRQ (unused) - [2] - Voltage unipolar/bipolar configuration - 0 == unipolar 5V (0V -- +5V) - 1 == bipolar 5V (-5V -- +5V) - [3] - Current offset configuration - 0 == disabled (0mA -- +32mAV) - 1 == enabled (+4mA -- +20mAV) - [4] - Firmware program configuration - 0 == program 1 (see manual table 5-4) - 1 == program 2 (see manual table 5-4) - 2 == program 3 (see manual table 5-4) - 3 == program 4 (see manual table 5-4) - [5] - Analog output 0 range configuration - 0 == voltage - 1 == current - [6] - Analog output 1 range configuration (same options) - [7] - Analog output 2 range configuration (same options) - [8] - Analog output 3 range configuration (same options) - [9] - Analog output 4 range configuration (same options) - [10] - Analog output 5 range configuration (same options) - [11] - Analog output 6 range configuration (same options) - [12] - Analog output 7 range configuration (same options) -*/ + * Driver: dt2815 + * Description: Data Translation DT2815 + * Author: ds + * Status: mostly complete, untested + * Devices: [Data Translation] DT2815 (dt2815) + * + * I'm not sure anyone has ever tested this board. If you have information + * contrary, please update. + * + * Configuration options: + * [0] - I/O port base base address + * [1] - IRQ (unused) + * [2] - Voltage unipolar/bipolar configuration + * 0 == unipolar 5V (0V -- +5V) + * 1 == bipolar 5V (-5V -- +5V) + * [3] - Current offset configuration + * 0 == disabled (0mA -- +32mAV) + * 1 == enabled (+4mA -- +20mAV) + * [4] - Firmware program configuration + * 0 == program 1 (see manual table 5-4) + * 1 == program 2 (see manual table 5-4) + * 2 == program 3 (see manual table 5-4) + * 3 == program 4 (see manual table 5-4) + * [5] - Analog output 0 range configuration + * 0 == voltage + * 1 == current + * [6] - Analog output 1 range configuration (same options) + * [7] - Analog output 2 range configuration (same options) + * [8] - Analog output 3 range configuration (same options) + * [9] - Analog output 4 range configuration (same options) + * [10] - Analog output 5 range configuration (same options) + * [11] - Analog output 6 range configuration (same options) + * [12] - Analog output 7 range configuration (same options) + */ #include <linux/module.h> #include "../comedidev.h" @@ -120,27 +120,27 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, } /* - options[0] Board base address - options[1] IRQ (not applicable) - options[2] Voltage unipolar/bipolar configuration - 0 == unipolar 5V (0V -- +5V) - 1 == bipolar 5V (-5V -- +5V) - options[3] Current offset configuration - 0 == disabled (0mA -- +32mAV) - 1 == enabled (+4mA -- +20mAV) - options[4] Firmware program configuration - 0 == program 1 (see manual table 5-4) - 1 == program 2 (see manual table 5-4) - 2 == program 3 (see manual table 5-4) - 3 == program 4 (see manual table 5-4) - options[5] Analog output 0 range configuration - 0 == voltage - 1 == current - options[6] Analog output 1 range configuration - ... - options[12] Analog output 7 range configuration - 0 == voltage - 1 == current + * options[0] Board base address + * options[1] IRQ (not applicable) + * options[2] Voltage unipolar/bipolar configuration + * 0 == unipolar 5V (0V -- +5V) + * 1 == bipolar 5V (-5V -- +5V) + * options[3] Current offset configuration + * 0 == disabled (0mA -- +32mAV) + * 1 == enabled (+4mA -- +20mAV) + * options[4] Firmware program configuration + * 0 == program 1 (see manual table 5-4) + * 1 == program 2 (see manual table 5-4) + * 2 == program 3 (see manual table 5-4) + * 3 == program 4 (see manual table 5-4) + * options[5] Analog output 0 range configuration + * 0 == voltage + * 1 == current + * options[6] Analog output 1 range configuration + * ... + * options[12] Analog output 7 range configuration + * 0 == voltage + * 1 == current */ static int dt2815_attach(struct comedi_device *dev, struct comedi_devconfig *it) -- 1.9.1
Powered by blists - more mailing lists