[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1466176454-28084-18-git-send-email-srinivas.kandagatla@linaro.org>
Date: Fri, 17 Jun 2016 16:14:14 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Andy Gross <andy.gross@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
David Brown <david.brown@...aro.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-soc@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH 16/16] arm64: dts: msm8996: add sdc2 support
This patch adds support to sdc2 sdhci controller, which is used on some
of the boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f68b078..5db7bf4 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -246,6 +246,21 @@
status = "disabled";
};
+ sdhc2: sdhci@...4900 {
+ status = "disabled";
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x74A4900 0x314>, <0x74A4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>;
+ bus-width = <4>;
+ };
+
msmgpio: pinctrl@...0000 {
compatible = "qcom,msm8996-pinctrl";
reg = <0x01010000 0x300000>;
--
2.7.4
Powered by blists - more mailing lists