linux-kernel - [PATCH v6 0/2] Add a new Rockchip usb2 phy driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1466129353-48063-1-git-send-email-frank.wang@rock-chips.com>
Date:	Fri, 17 Jun 2016 10:09:11 +0800
From:	Frank Wang <frank.wang@...k-chips.com>
To:	heiko@...ech.de, dianders@...omium.org, linux@...ck-us.net,
	groeck@...omium.org, jwerner@...omium.org, kishon@...com,
	robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org
Cc:	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	linux-usb@...r.kernel.org, linux-rockchip@...ts.infradead.org,
	xzy.xu@...k-chips.com, kever.yang@...k-chips.com,
	huangtao@...k-chips.com, william.wu@...k-chips.com,
	frank.wang@...k-chips.com
Subject: [PATCH v6 0/2] Add a new Rockchip usb2 phy driver

The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.

These series patches add phy-rockchip-inno-usb2.c and the corresponding
documentation.

Changes in v6:
 - Changed '_' to '-' for otg-id and otg-bvalid property in devicetree bindings.
 - Fixed the output clock would be disabled more than once while phy-port was going to suspend.
 - Improved the driver to avoid the currently empty otg-port would cause null-pointer dereferences.

Changes in v5:
 - Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks.

Changes in v4:
 - Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
 - Supplemented some hardware-description into the devicetree bindings.
 - Resolved the mapping defect between fixed value in driver and the property
   in devicetree.
 - Code cleanup.

Changes in v2:
 - Specified more hardware-description into the devicetree bindings.
 - Optimized some process of driver.

Frank Wang (2):
  Documentation: bindings: add DT documentation for Rockchip USB2PHY
  phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++
 drivers/phy/Kconfig                                |    7 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c               |  655 ++++++++++++++++++++
 4 files changed, 727 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

-- 
1.7.9.5