[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANLsYkwHMCSep-zBY+iQmCpGy2wvyegbb9pH70rv+iKsreSQwA@mail.gmail.com>
Date: Fri, 17 Jun 2016 09:22:15 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Sudeep Holla <sudeep.holla@....com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-pm@...r.kernel.org, Ulf Hansson <ulf.hansson@...aro.org>,
Jon Medhurst <tixy@...aro.org>,
Suzuki K Poulose <suzuki.poulose@....com>
Subject: Re: [PATCH v2 0/3] firmware: scpi: add device power domain support
On 16 June 2016 at 04:37, Sudeep Holla <sudeep.holla@....com> wrote:
> This series add support for SCPI based device device power state
> management using genpd.
>
> Regards,
> Sudeep
>
> v1[1]->v2:
> - Fixed the endianness handling in scpi_device_get_power_state
> as spotted by Tixy
> - Renamed scpi_pd.c to scpi_pm_domain.c as suggested by Ulf
> - Added Mark's ack on DT binding
>
> [1] https://marc.info/?l=linux-kernel&m=146522850003483&w=2
>
> Sudeep Holla (3):
> firmware: arm_scpi: add support for device power state management
> Documentation: add DT bindings for ARM SCPI power domains
> firmware: scpi: add device power domain support using genpd
>
> Documentation/devicetree/bindings/arm/arm,scpi.txt | 34 +++++
> drivers/firmware/Kconfig | 9 ++
> drivers/firmware/Makefile | 1 +
> drivers/firmware/arm_scpi.c | 30 ++++
> drivers/firmware/scpi_pm_domain.c | 152 +++++++++++++++++++++
> include/linux/scpi_protocol.h | 2 +
> 6 files changed, 228 insertions(+)
> create mode 100644 drivers/firmware/scpi_pm_domain.c
>
> --
> 2.7.4
>
For the set:
Tested-by: Mathieu Poirier <mathieu.poirier@...aro.org>
Powered by blists - more mailing lists