linux-kernel - [PATCH v13 09/16] powerpc/PCI: Keep resource idx order with bridge register number

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160618022501.15648-10-yinghai@kernel.org>
Date:	Fri, 17 Jun 2016 19:24:54 -0700
From:	Yinghai Lu <yinghai@...nel.org>
To:	Bjorn Helgaas <bhelgaas@...gle.com>,
	David Miller <davem@...emloft.net>,
	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Linus Torvalds <torvalds@...ux-foundation.org>
Cc:	Wei Yang <weiyang@...ux.vnet.ibm.com>,
	Khalid Aziz <khalid.aziz@...cle.com>,
	linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
	Yinghai Lu <yinghai@...nel.org>, linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH v13 09/16] powerpc/PCI: Keep resource idx order with bridge register number

Same as sparc version.

Make resource with consistent sequence
like other arch or directly from pci_read_bridge_bases(),
even when non-pref mmio is missing, or out of ordering in firmware reporting.

Just hold i = 1 for non pref mmio, and i = 2 for pref mmio.

Signed-off-by: Yinghai Lu <yinghai@...nel.org>
Cc: linuxppc-dev@...ts.ozlabs.org
---
 arch/powerpc/kernel/pci_of_scan.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 526ac67..719f225 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -252,7 +252,7 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 		bus->resource[i] = res;
 		++res;
 	}
-	i = 1;
+	i = 3;
 	for (; len >= 32; len -= 32, ranges += 8) {
 		flags = pci_parse_of_flags(of_read_number(ranges, 1), 1);
 		size = of_read_number(&ranges[6], 2);
@@ -265,6 +265,12 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 				       " for bridge %s\n", node->full_name);
 				continue;
 			}
+		} else if ((flags & IORESOURCE_PREFETCH) &&
+			   !bus->resource[2]->flags) {
+			res = bus->resource[2];
+		} else if (((flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) ==
+			    IORESOURCE_MEM) && !bus->resource[1]->flags) {
+			res = bus->resource[1];
 		} else {
 			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
 				printk(KERN_ERR "PCI: too many memory ranges"
-- 
2.8.3