linux-kernel - Re: RFC: Fix kdump failed with 'notsc'

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 20 Jun 2016 06:55:33 +0000
From:	"Wei, Jiangang" <weijg.fnst@...fujitsu.com>
To:	"tglx@...utronix.de" <tglx@...utronix.de>
CC:	"hpa@...or.com" <hpa@...or.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"akataria@...are.com" <akataria@...are.com>,
	"mingo@...hat.com" <mingo@...hat.com>,
	"x86@...nel.org" <x86@...nel.org>
Subject: Re: RFC: Fix kdump failed with 'notsc'

ping...

On Tue, 2016-06-14 at 17:54 +0800, Wei Jiangang wrote:
> Hi,
> 
> When I trigger kernel crash and specify 'notsc' for capture-kernel,
> The process of kdump will be blocked at calibrate_delay_converge().
> 
> /* wait for "start of" clock tick */
> ticks = jiffies;
> while (ticks == jiffies)
>         ; /* nothing */
> 
> The reason is that the jiffies remains the same, no changed.
> 
> serial console log as following,
> ............
> [    0.000000] Linux version 4.7.0-rc2+ (root@...alhost.localdomain)
> (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #2 SMP Wed Jun
> 156
> [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.7.0-rc2+ 
> root=/dev/mapper/centos-root ro rd.lvm.lv=centos/swap
> vconsole.font=latarcyrheb-sun16 rd.lvm.lv=centos/root crashkernel=256M
> vconsole.keymap=us console=tty0 console=ttyS0,115200n8 LANG=en_US.UTF-8
> irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off
> panic=10 rootflags=nofail acpi_no_memhotplug notsc 
> ............
> [    0.000000] tsc: Kernel compiled with CONFIG_X86_TSC, cannot disable
> TSC completely
> ............
> [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 133484882848 ns
> [    0.000000] tsc: Fast TSC calibration using PIT
> [    0.000000] tsc: Detected 3192.714 MHz processor
> [    0.000000] Calibrating delay loop... 
> 
> # The last log is raised by calibrate_delay(), which calls
> calibrate_delay_converge() to compute the lpj value. 
> 
> # So far, I don't know why the jiffies stays the same.
> # But I found two methods can avoid this problem。
> 
> 1）specify the 'lpj=<n>'  with 'notsc' together.
> 
> 2)  revert the 70de9a9.
> 
>     commit 70de9a97049e0ba79dc040868564408d5ce697f9
>     Author: Alok Kataria <akataria@...are.com>
>     Date:   Mon Nov 3 11:18:47 2008 -0800
> 
>     x86: don't use tsc_khz to calculate lpj if notsc is passed
>     
>     Impact: fix udelay when "notsc" boot parameter is passed
>     
>     With notsc passed on commandline, tsc may not be used for
>     udelays, make sure that we do not use tsc_khz to calculate
>     the lpj value in such cases.
> 
> IMO,
> The flow of getting tsc_khz as following,
> tsc_init()->x86_platform.calibrate_tsc()->native_calibrate_tsc()->quick_pit_calibrate().
> No codes use or call 'rdtsc'.
> 
> Even if  ‘notsc’  is passed, the tsc_khz is credible.
> and we can get lpj by it.
> 
> So I want to push a patch to revert the 70de9a9.
> Any comments or suggestions is appreciated.
> 
> Thanks,
> wei
> 
> 
>