| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160620073122.GA6156@yexl-desktop>
Date: Mon, 20 Jun 2016 15:31:22 +0800
From: kernel test robot <xiaolong.ye@...el.com>
To: Len Brown <len.brown@...el.com>
Cc: LKML <linux-kernel@...r.kernel.org>,
Len Brown <len.brown@...el.com>, linux-pm@...r.kernel.org,
linux-acpi@...r.kernel.org, lkp@...org
Subject: [lkp] [x86 tsc] 19fa5e7364: WARNING: CPU: 0 PID: 0 at
arch/x86/mm/extable.c:50 ex_handler_rdmsr_unsafe+0x72/0x80
FYI, we noticed the following commit:
https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git x86
commit 19fa5e73647fde1e6a7038a8f05cddf4c43f08d3 ("x86 tsc: enumerate SKL cpu_khz and tsc_khz via CPUID")
on test machine: vm-kbuild-yocto-x86_64: 1 threads qemu-system-x86_64 -enable-kvm -cpu SandyBridge with 320M memory
caused below changes:
+------------------------------------------------------------------+------------+------------+
| | cc50dc7f73 | 19fa5e7364 |
+------------------------------------------------------------------+------------+------------+
| boot_successes | 0 | 0 |
| boot_failures | 10 | 12 |
| invoked_oom-killer:gfp_mask=0x | 10 | 10 |
| Mem-Info | 10 | 10 |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes | 10 | 10 |
| backtrace:btrfs_test_extent_io | 10 | 10 |
| backtrace:init_btrfs_fs | 10 | 10 |
| backtrace:kernel_init_freeable | 10 | 10 |
| WARNING:at_arch/x86/mm/extable.c:#ex_handler_rdmsr_unsafe | 0 | 10 |
| backtrace:native_calibrate_cpu | 0 | 10 |
| backtrace:tsc_init | 0 | 10 |
| backtrace:x86_late_time_init | 0 | 10 |
+------------------------------------------------------------------+------------+------------+
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/x86/mm/extable.c:50 ex_handler_rdmsr_unsafe+0x72/0x80
[ 0.000000] unchecked MSR access error: RDMSR from 0xce
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0-rc3-00009-g19fa5e7 #1
[ 0.000000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[ 0.000000] 0000000000000000 ffffffff83203c38 ffffffff816da89d ffffffff83203c88
[ 0.000000] 0000000000000000 ffffffff82e71808 ffffffff8104e8c2 ffffffff83203c78
[ 0.000000] ffffffff810b796b 000000328453b4a0 ffffffff82e71808 0000000000000032
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff816da89d>] dump_stack+0x83/0xb6
[ 0.000000] [<ffffffff8104e8c2>] ? ex_handler_rdmsr_unsafe+0x72/0x80
[ 0.000000] [<ffffffff810b796b>] __warn+0x10b/0x130
[ 0.000000] [<ffffffff810b79f3>] warn_slowpath_fmt+0x63/0x70
[ 0.000000] [<ffffffff8104e8c2>] ex_handler_rdmsr_unsafe+0x72/0x80
[ 0.000000] [<ffffffff8104ea26>] fixup_exception+0x46/0x60
[ 0.000000] [<ffffffff81020fdb>] do_general_protection+0x7b/0x150
[ 0.000000] [<ffffffff828101d8>] general_protection+0x28/0x30
[ 0.000000] [<ffffffff810496d6>] ? native_read_msr+0x6/0x20
[ 0.000000] [<ffffffff810281e1>] cpu_khz_from_msr+0xf1/0x150
[ 0.000000] [<ffffffff8341b16b>] ? trap_init+0x22e/0x22e
[ 0.000000] [<ffffffff81027935>] native_calibrate_cpu+0x85/0x5b0
[ 0.000000] [<ffffffff81049826>] ? native_restore_fl+0x6/0x10
[ 0.000000] [<ffffffff81112556>] ? __setup_irq+0x196/0x750
[ 0.000000] [<ffffffff8341b16b>] ? trap_init+0x22e/0x22e
[ 0.000000] [<ffffffff8341ec3f>] tsc_init+0x42/0x3c3
[ 0.000000] [<ffffffff81112c5f>] ? setup_irq+0x6f/0xc0
[ 0.000000] [<ffffffff8341b16b>] ? trap_init+0x22e/0x22e
[ 0.000000] [<ffffffff8341b16b>] ? trap_init+0x22e/0x22e
[ 0.000000] [<ffffffff8341b17a>] x86_late_time_init+0xf/0x11
[ 0.000000] [<ffffffff8341b17a>] ? x86_late_time_init+0xf/0x11
[ 0.000000] [<ffffffff83414173>] start_kernel+0x3f3/0x4b1
[ 0.000000] [<ffffffff83413120>] ? early_idt_handler_array+0x120/0x120
[ 0.000000] [<ffffffff8341329e>] x86_64_start_reservations+0x2f/0x31
[ 0.000000] [<ffffffff83413386>] x86_64_start_kernel+0xe6/0xf3
[ 0.000000] ---[ end trace 7c0d92684f22f4ac ]---
[ 0.000000] tsc: Fast TSC calibration using PIT
FYI, raw QEMU command line is:
qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /pkg/linux/x86_64-randconfig-w0-06180628/gcc-6/19fa5e73647fde1e6a7038a8f05cddf4c43f08d3/vmlinuz-4.7.0-rc3-00009-g19fa5e7 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-32/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-w0-06180628-19fa5e73647fde1e6a7038a8f05cddf4c43f08d3-20160618-25535-h82bax-0.yaml~ ARCH=x86_64 kconfig=x86_64-randconfig-w0-06180628 branch=internal-eywa/master commit=19fa5e73647fde1e6a7038a8f05cddf4c43f08d3 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-w0-06180628/gcc-6/19fa5e73647fde1e6a7038a8f05cddf4c43f08d3/vmlinuz-4.7.0-rc3-00009-g19fa5e7 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-w0-06180628/gcc-6/19fa5e73647fde1e6a7038a8f05cddf4c43f08d3/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-32::dhcp drbd.minor_count=8' -initrd /fs/sdh1/initrd-vm-kbuild-yocto-x86_64-32 -m 320 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdh1/disk0-vm-kbuild-yocto-x86_64-32,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-32 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-32 -daemonize -display none -monitor null
Thanks,
Xiaolong
View attachment "config-4.7.0-rc3-00009-g19fa5e7" of type "text/plain" (113455 bytes)
Download attachment "dmesg.xz" of type "application/octet-stream" (18140 bytes)
Powered by blists - more mailing lists