[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5767A92E.5040602@rock-chips.com>
Date: Mon, 20 Jun 2016 16:28:30 +0800
From: Andy Yan <andy.yan@...k-chips.com>
To: Krzysztof Kozlowski <k.kozlowski@...sung.com>, robh+dt@...nel.org,
heiko@...ech.de, john.stultz@...aro.org, arnd@...db.de,
bjorn.andersson@...aro.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
alexandre.belloni@...e-electrons.com, dbaryshkov@...il.com,
sre@...nel.org, matthias.bgg@...il.com, linux-pm@...r.kernel.org,
mbrugger@...e.com, lorenzo.pieralisi@....com,
moritz.fischer@...us.com, richard@....at
Subject: Re: [PATCH v9 2/4] power: reset: add reboot mode driver
Hi Krzysztof:
On 2016年06月20日 16:09, Krzysztof Kozlowski wrote:
> On 06/20/2016 08:38 AM, Andy Yan wrote:
>> This driver parses the reboot commands like "reboot bootloader"
>> and "reboot recovery" to get a boot mode described in the
>> device tree , then call the write interfae to store the boot
>> mode in some place like special register or sram, which can
>> be read by the bootloader after system reboot, then the bootloader
>> can take different action according to the mode stored.
>>
>> This is commonly used on Android based devices, in order to
>> reboot the device into fastboot or recovery mode.
>>
>> Reviewed-by: Matthias Brugger <matthias.bgg@...il.com>
>> Reviewed-by: Moritz Fischer <moritz.fischer@...us.com>
>> Tested-by: John Stultz <john.stultz@...aro.org>
>> Acked-by: John Stultz <john.stultz@...aro.org>
>> Signed-off-by: Andy Yan <andy.yan@...k-chips.com>
>>
>> ---
>>
>> Changes in v9:
>> - select MFD_SYSCON when syscon-reboot-mode driver enabled
>> - refactoring error handling in reboot_mode_register
>>
>> Changes in v8:
>> - do some cleanup when driver ubind
>>
>> Changes in v7:
>> - address some suggestions from Krzysztof, make syscon-reboot-mode driver data self-contained.
>>
>> Changes in v6: None
>> Changes in v5:
>> - use two blank space under help in Kconfig
>> - use unsigned int instead of int for member magic in struct mode_info
>>
>> Changes in v4:
>> - make this driver depends on OF to avoid kbuild test error
>>
>> Changes in v3:
>> - scan multi properities
>> - add mask value for some platform which only use some bits of the register
>> to store boot mode magic value
>>
>> Changes in v2:
>> - move to dir drivers/power/reset/
>> - make syscon-reboot-mode a generic driver
>>
>> Changes in v1:
>> - fix the embarrassed compile warning
>> - correct the maskrom magic number
>> - check for the normal reboot
>>
>> drivers/power/reset/Kconfig | 14 ++++
>> drivers/power/reset/Makefile | 2 +
>> drivers/power/reset/reboot-mode.c | 128 +++++++++++++++++++++++++++++++
>> drivers/power/reset/reboot-mode.h | 14 ++++
>> drivers/power/reset/syscon-reboot-mode.c | 100 ++++++++++++++++++++++++
>> 5 files changed, 258 insertions(+)
>> create mode 100644 drivers/power/reset/reboot-mode.c
>> create mode 100644 drivers/power/reset/reboot-mode.h
>> create mode 100644 drivers/power/reset/syscon-reboot-mode.c
>>
>> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
>> index 9bb2622..4ceaf74 100644
>> --- a/drivers/power/reset/Kconfig
>> +++ b/drivers/power/reset/Kconfig
>> @@ -183,5 +183,19 @@ config POWER_RESET_ZX
>> help
>> Reboot support for ZTE SoCs.
>>
>> +config REBOOT_MODE
>> + tristate
>> +
>> +config SYSCON_REBOOT_MODE
>> + bool "Generic SYSCON regmap reboot mode driver"
> Why not tristate?
I see many reset drivers in this directories use bool, so I follow
them.
>
> Beside that the patch looks good.
>
> Best regards,
> Krzysztof
>
>> + depends on OF
>> + select REBOOT_MODE
>> + select MFD_SYSCON
>> + help
>> + Say y here will enable reboot mode driver. This will
>> + get reboot mode arguments and store it in SYSCON mapped
>> + register, then the bootloader can read it to take different
>> + action according to the mode.
>> +
>
>
>
Powered by blists - more mailing lists