| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <96f7a091-e987-91f1-15e2-34c00eb1a253@annapurnalabs.com>
Date: Mon, 20 Jun 2016 18:18:53 +0300
From: Netanel Belgazal <netanel@...apurnalabs.com>
To: Matt Wilson <msw@...n.com>, Francois Romieu <romieu@...zoreil.com>
Cc: netdev@...r.kernel.org, davem@...emloft.net,
linux-kernel@...r.kernel.org, zorik@...apurnalabs.com,
saeed@...apurnalabs.com, alex@...apurnalabs.com,
aliguori@...zon.com, antoine.tenart@...e-electrons.com
Subject: Re: [PATCH net-next] net: ena: Add a driver for Amazon Elastic
Network Adapters (ENA)
On 06/17/2016 04:09 AM, Matt Wilson wrote:
> On Thu, Jun 16, 2016 at 10:46:23PM +0200, Francois Romieu wrote:
>> Netanel Belgazal <netanel@...apurnalabs.com> :
>> [...]
>>
>> Very limited review below.
> I'll comment on the documentation (since I edited it heavily) but will
> leave some the other parts for Netanel to answer.
>
>>> diff --git a/Documentation/networking/ena.txt b/Documentation/networking/ena.txt
>>> new file mode 100644
>>> index 0000000..528544f
>>> --- /dev/null
>>> +++ b/Documentation/networking/ena.txt
>>> @@ -0,0 +1,330 @@
>>> +Linux kernel driver for Elastic Network Adapter (ENA) family:
>>> +=============================================================
>>> +
>>> +Overview:
>>> +=========
>>> +The ENA driver provides a modern Ethernet device interface optimized
>>> +for high performance and low CPU overhead.
>> Marketing boilerplate. How much of it will still be true in 6 months ?
>> 6 years ?
>>
>> Hint: stay technical. If in doubt, make it boring. :o)
> Hopefully it will still be true for quite a while. But you make a good
> point, the overview here should stick with the technical details.
>
>> [...]
>>> +ENA devices allow high speed and low overhead Ethernet traffic
>>> +processing by providing a dedicated Tx/Rx queue pair per host CPU, a
>>> +dedicated MSI-X interrupt vector per Tx/Rx queue pair, adaptive
>>> +interrupt moderation, and CPU cacheline optimized data placement.
>> How many queues exactly ?
> It's negotiated with the adapter via the admin queue, and it will vary
> based on the capabilities of a particular adapter. See:
>
> rc = ena_com_get_feature(ena_dev, &get_resp,
> ENA_ADMIN_MAX_QUEUES_NUM);
>
> in ena_com.c
>
>> [...]
>>> +Memory Allocations:
>>> +===================
>>> +DMA Coherent buffers are allocated for the f`ollowing DMA rings:
>>> +- Tx submission ring (For regular mode; for LLQ mode it is allocated
>>> + using kzalloc)
>>> +- Tx completion ring
>>> +- Rx submission ring
>>> +- Rx completion ring
>>> +- Admin submission ring
>>> +- Admin completion ring
>>> +- AENQ ring
>> Useless documentation (implementation detail).
>>
>> Nobody will maintain it when the driver changes. Please remove.
> Ack.
>
>> [...]
>>> +MTU:
>>> +====
>>> +The driver supports an arbitrarily large MTU with a maximum that is
>>> +negotiated with the device. The driver configures MTU using the
>>> +SetFeature command (ENA_ADMIN_MTU property). The user can change MTU
>>> +via ifconfig(8) and ip(8).
>> Please avoid advertising legacy ifconfig.
> Ack.
>
>> [...]
>>> diff --git a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
>>> new file mode 100644
>>> index 0000000..8516e5e
>>> --- /dev/null
>>> +++ b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
>> [...]
>>> +/* admin commands opcodes */
>>> +enum ena_admin_aq_opcode {
>>> + /* create submission queue */
>>> + ENA_ADMIN_CREATE_SQ = 1,
>>> +
>>> + /* destroy submission queue */
>>> + ENA_ADMIN_DESTROY_SQ = 2,
>>> +
>>> + /* create completion queue */
>>> + ENA_ADMIN_CREATE_CQ = 3,
>>> +
>>> + /* destroy completion queue */
>>> + ENA_ADMIN_DESTROY_CQ = 4,
>>> +
>>> + /* get capabilities of particular feature */
>>> + ENA_ADMIN_GET_FEATURE = 8,
>>> +
>>> + /* get capabilities of particular feature */
>>> + ENA_ADMIN_SET_FEATURE = 9,
>>> +
>>> + /* get statistics */
>>> + ENA_ADMIN_GET_STATS = 11,
>>> +};
>> The documentation above simply duplicates the member names -> useless
>> visual payload.
>>
>> Please replace space with tab before "=" to line things up
> I'll leave this to Netanel. A good amount of this comes from a unified
> documentation / struct / register access generation script, and it
> might need some massaging.
Ack. (Removed comments and replace space with tab)
>
>> [...]
>>> +/* Basic Statistics Command. */
>>> +struct ena_admin_basic_stats {
>>> + /* word 0 : */
>>> + u32 tx_bytes_low;
>>> +
>>> + /* word 1 : */
>>> + u32 tx_bytes_high;
>>> +
>>> + /* word 2 : */
>>> + u32 tx_pkts_low;
>>> +
>>> + /* word 3 : */
>>> + u32 tx_pkts_high;
>>> +
>>> + /* word 4 : */
>>> + u32 rx_bytes_low;
>>> +
>>> + /* word 5 : */
>>> + u32 rx_bytes_high;
>>> +
>>> + /* word 6 : */
>>> + u32 rx_pkts_low;
>>> +
>>> + /* word 7 : */
>>> + u32 rx_pkts_high;
>>> +
>>> + /* word 8 : */
>>> + u32 rx_drops_low;
>>> +
>>> + /* word 9 : */
>>> + u32 rx_drops_high;
>>> +};
>> struct zorg {
>> u32 ...;
>> u32 ...;
>> u32 ...;
>> u32 ...;
>>
>> u32 ...;
>> u32 ...;
>> u32 ...;
>> u32 ...;
>>
>> u32 ...;
>> u32 ...;
>> u32 ...;
>> };
>>
>> -> No comment needed to figure the offset.
>> Comment removed => no need to check if offset starts at word 0 or word 1.
>>
>> [...]
Ack
>>> diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
>>> new file mode 100644
>>> index 0000000..357e10f
>>> --- /dev/null
>>> +++ b/drivers/net/ethernet/amazon/ena/ena_com.c
>> [...]
>>> +static inline int ena_com_mem_addr_set(struct ena_com_dev *ena_dev,
>>> + struct ena_common_mem_addr *ena_addr,
>>> + dma_addr_t addr)
>>> +{
>>> + if ((addr & GENMASK_ULL(ena_dev->dma_addr_bits - 1, 0)) != addr) {
>>> + ena_trc_err("dma address has more bits that the device supports\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + ena_addr->mem_addr_low = (u32)addr;
>>> + ena_addr->mem_addr_high =
>>> + ((addr & GENMASK_ULL(ena_dev->dma_addr_bits - 1, 32)) >> 32);
>> No need to "... & GENMASK" given the test above.
> Ack.
>
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int ena_com_admin_init_sq(struct ena_com_admin_queue *queue)
>>> +{
>>> + queue->sq.entries =
>>> + dma_alloc_coherent(queue->q_dmadev,
>>> + ADMIN_SQ_SIZE(queue->q_depth),
>>> + &queue->sq.dma_addr,
>>> + GFP_KERNEL | __GFP_ZERO);
>> 1. Use dma_zalloc_coherent().
>>
>> 2. Style
>> xyzab = dma_alloc_coherent(..., ..., ... ...,
>> ...);
>>
>> 3. Add local variable for &queue->sq.
> Ack.
>
>> In a different part of the code: s/uint32_t/u32/
> Argh! I thought I caught all of those.
Ack
>
> Thanks for the review!
>
> --msw
Powered by blists - more mailing lists