| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1466493770-11895-6-git-send-email-andrew.smirnov@gmail.com>
Date: Tue, 21 Jun 2016 00:22:40 -0700
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: rtc-linux@...glegroups.com
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
linux-kernel@...r.kernel.org, cphealy@...il.com
Subject: [PATCH v2 07/17] RTC: ds1307: Move chip configuration into a separate routine
Move chip configuration into a separate routine to improve readablity of
the code.
Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
---
drivers/rtc/rtc-ds1307.c | 172 ++++++++++++++++++++++++++---------------------
1 file changed, 97 insertions(+), 75 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index ccfaba4..4fa09dc 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1271,74 +1271,32 @@ static bool ds1307_want_irq(const struct ds1307 *ds1307,
return false;
}
-static int ds1307_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ds1307_chip_configure(struct ds1307 *ds1307)
{
- struct ds1307 *ds1307;
- int err = -ENODEV;
- int tmp;
- struct chip_desc *chip = &chips[id->driver_data];
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- unsigned char *buf;
- struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
- irq_handler_t irq_handler = ds1307_irq;
-
- static const int bbsqi_bitpos[] = {
- [ds_1337] = 0,
- [ds_1341] = 0,
- [ds_1339] = DS1339_BIT_BBSQI,
- [ds_3231] = DS3231_BIT_BBSQW,
- };
- const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
- && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
- return -EIO;
-
- ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
- if (!ds1307)
- return -ENOMEM;
-
- i2c_set_clientdata(client, ds1307);
-
- ds1307->client = client;
- ds1307->type = id->driver_data;
-
- if (!pdata && client->dev.of_node)
- ds1307_trickle_of_init(client, chip);
- else if (pdata && pdata->trickle_charger_setup)
- chip->trickle_charger_setup = pdata->trickle_charger_setup;
-
- if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
- dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
- DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
- chip->trickle_charger_reg);
- i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
- DS13XX_TRICKLE_CHARGER_MAGIC |
- chip->trickle_charger_setup);
- }
+ int tmp;
+ unsigned char *buf;
+ struct i2c_client *client = ds1307->client;
buf = ds1307->regs;
- if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
- ds1307->read_block_data = ds1307_native_smbus_read_block_data;
- ds1307->write_block_data = ds1307_native_smbus_write_block_data;
- } else {
- ds1307->read_block_data = ds1307_read_block_data;
- ds1307->write_block_data = ds1307_write_block_data;
- }
switch (ds1307->type) {
case ds_1337:
case ds_1339:
case ds_3231:
- case ds_1341:
+ case ds_1341: {
+ static const int bbsqi_bitpos[] = {
+ [ds_1337] = 0,
+ [ds_1341] = 0,
+ [ds_1339] = DS1339_BIT_BBSQI,
+ [ds_3231] = DS3231_BIT_BBSQW,
+ };
+
/* get registers that the "rtc" read below won't read... */
- tmp = ds1307->read_block_data(ds1307->client,
- DS1337_REG_CONTROL, 2, buf);
+ tmp = ds1307->read_block_data(client,
+ DS1337_REG_CONTROL, 2, buf);
if (tmp != 2) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit;
+ dev_dbg(&ds1307->client->dev, "read error %d\n", tmp);
+ return -EIO;
}
/* oscillator off? turn it on, so clock can tick. */
@@ -1366,7 +1324,8 @@ static int ds1307_probe(struct i2c_client *client,
* Write status register. Control register
* would be set by the code below
*/
- i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
+ i2c_smbus_write_byte_data(client,
+ DS1337_REG_STATUS,
ds1307->regs[1]);
}
@@ -1379,24 +1338,26 @@ static int ds1307_probe(struct i2c_client *client,
| bbsqi_bitpos[ds1307->type];
ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
- i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
- ds1307->regs[0]);
+ i2c_smbus_write_byte_data(client,
+ DS1337_REG_CONTROL,
+ ds1307->regs[0]);
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[1] & DS1337_BIT_OSF) {
- i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
- ds1307->regs[1] & ~DS1337_BIT_OSF);
- dev_warn(&client->dev, "SET TIME!\n");
+ i2c_smbus_write_byte_data(client,
+ DS1337_REG_STATUS,
+ ds1307->regs[1] & ~DS1337_BIT_OSF);
+ dev_warn(&ds1307->client->dev, "SET TIME!\n");
}
break;
-
+ }
case rx_8025:
- tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
- RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
+ tmp = i2c_smbus_read_i2c_block_data(client,
+ RX8025_REG_CTRL1 << 4 | 0x08,
+ 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit;
+ return -EIO;
}
/* oscillator off? turn it on, so clock can tick. */
@@ -1432,15 +1393,14 @@ static int ds1307_probe(struct i2c_client *client,
/* switch to 24 hour mode */
i2c_smbus_write_byte_data(client,
RX8025_REG_CTRL1 << 4 | 0x08,
- ds1307->regs[0] |
- RX8025_BIT_2412);
+ ds1307->regs[0] | RX8025_BIT_2412);
- tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
- RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
+ tmp = i2c_smbus_read_i2c_block_data(client,
+ RX8025_REG_CTRL1 << 4 | 0x08,
+ 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit;
+ return -EIO;
}
/* correct hour */
@@ -1455,6 +1415,68 @@ static int ds1307_probe(struct i2c_client *client,
hour);
}
break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ds1307_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds1307 *ds1307;
+ int err = -ENODEV;
+ int tmp;
+ struct chip_desc *chip = &chips[id->driver_data];
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ unsigned char *buf;
+ struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
+ irq_handler_t irq_handler = ds1307_irq;
+
+ const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
+ && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EIO;
+
+ ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
+ if (!ds1307)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, ds1307);
+
+ ds1307->client = client;
+ ds1307->type = id->driver_data;
+
+ if (!pdata && client->dev.of_node)
+ ds1307_trickle_of_init(client, chip);
+ else if (pdata && pdata->trickle_charger_setup)
+ chip->trickle_charger_setup = pdata->trickle_charger_setup;
+
+ if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
+ dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
+ DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
+ chip->trickle_charger_reg);
+ i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
+ DS13XX_TRICKLE_CHARGER_MAGIC |
+ chip->trickle_charger_setup);
+ }
+
+ buf = ds1307->regs;
+ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ ds1307->read_block_data = ds1307_native_smbus_read_block_data;
+ ds1307->write_block_data = ds1307_native_smbus_write_block_data;
+ } else {
+ ds1307->read_block_data = ds1307_read_block_data;
+ ds1307->write_block_data = ds1307_write_block_data;
+ }
+
+ err = ds1307_chip_configure(ds1307);
+ if (err < 0)
+ return err;
+
+ switch (ds1307->type) {
case ds_1388:
ds1307->offset = 1; /* Seconds starts at 1 */
break;
--
2.5.5
Powered by blists - more mailing lists