[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bebbe715-19df-be34-40d9-6845f38b9c2f@linaro.org>
Date: Tue, 21 Jun 2016 16:03:54 +0800
From: Hanjun Guo <hanjun.guo@...aro.org>
To: Tomasz Nowicki <tn@...ihalf.com>, marc.zyngier@....com,
tglx@...utronix.de, jason@...edaemon.net, rjw@...ysocki.net,
bhelgaas@...gle.com, lorenzo.pieralisi@....com,
robert.richter@...iumnetworks.com, shijie.huang@....com,
Suravee.Suthikulpanit@....com
Cc: al.stone@...aro.org, mw@...ihalf.com, graeme.gregory@...aro.org,
Catalin.Marinas@....com, will.deacon@....com,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, ddaney.cavm@...il.com,
okaya@...eaurora.org, andrea.gallo@...aro.org,
linux-pci@...r.kernel.org
Subject: Re: [PATCH V7 6/8] irqchip/gicv3-its: Probe ITS in the ACPI way
On 2016/6/20 19:02, Tomasz Nowicki wrote:
> ITS is prepared for being initialized different than DT,
> therefore we can initialize it in ACPI way. We collect register base
> address from MADT table and pass mandatory info to firmware-agnostic
> ITS init call.
>
> Use here IORT lib to register ITS domain which then can be found and
> used on to build another PCI MSI domain in hierarchical stack domain.
>
> NOTE: Waiting for proper ITS and NUMA node relation description in IORT
> table, we pass around NUMA_NO_NODE to the its_probe_one init call.
> This means that Cavium ThunderX erratum 23144 (pass1.1 only)
> is not supported for ACPI boot method yet.
>
> Signed-off-by: Tomasz Nowicki <tn@...ihalf.com>
> Acked-by: Marc Zyngier <marc.zyngier@....com>
> ---
> drivers/irqchip/Kconfig | 1 +
> drivers/irqchip/irq-gic-v3-its.c | 59 +++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 59 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 5495a5b..fd4b8b8 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -38,6 +38,7 @@ config ARM_GIC_V3
> config ARM_GIC_V3_ITS
> bool
> select PCI_MSI_IRQ_DOMAIN
> + select IORT_TABLE if ACPI
>
> config ARM_NVIC
> bool
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 1e0888d..c5c8616 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -15,10 +15,13 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/acpi.h>
> #include <linux/bitmap.h>
> #include <linux/cpu.h>
> #include <linux/delay.h>
> #include <linux/interrupt.h>
> +#include <linux/irqdomain.h>
> +#include <linux/iort.h>
> #include <linux/log2.h>
> #include <linux/mm.h>
> #include <linux/msi.h>
> @@ -1438,6 +1441,11 @@ static int its_irq_gic_domain_alloc(struct irq_domain *domain,
> fwspec.param[0] = GIC_IRQ_TYPE_LPI;
> fwspec.param[1] = hwirq;
> fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
> + } else if (is_fwnode_irqchip(domain->parent->fwnode)) {
> + fwspec.fwnode = domain->parent->fwnode;
> + fwspec.param_count = 2;
> + fwspec.param[0] = hwirq;
> + fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
> } else {
> return -EINVAL;
> }
> @@ -1792,6 +1800,55 @@ static int __init its_of_probe(struct device_node *node)
> return 0;
> }
>
> +#ifdef CONFIG_ACPI
> +
> +#define ACPI_GICV3_ITS_MEM_SIZE (SZ_128K)
> +
> +static int __init gic_acpi_parse_madt_its(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + struct acpi_madt_generic_translator *its_entry;
> + struct fwnode_handle *dom_handle;
> + struct resource res;
> + int err;
> +
> + its_entry = (struct acpi_madt_generic_translator *)header;
> + res.start = its_entry->base_address;
> + res.end = its_entry->base_address + ACPI_GICV3_ITS_MEM_SIZE - 1;
> +
> + dom_handle = irq_domain_alloc_fwnode((void *)its_entry->base_address);
> + if (!dom_handle) {
> + pr_err("ITS@%pa: Unable to allocate GICv3 ITS domain token\n",
> + &res.start);
> + return -ENOMEM;
> + }
> +
> + err = iort_register_domain_token(its_entry->translation_id, dom_handle);
> + if (err) {
> + pr_err("ITS@%pa: Unable to register GICv3 ITS domain token (ITS ID %d) to IORT\n",
> + &res.start, its_entry->translation_id);
> + goto dom_err;
> + }
> +
> + err = its_probe_one(&res, dom_handle, NUMA_NO_NODE);
> + if (!err)
> + return 0;
> +
> + iort_deregister_domain_token(its_entry->translation_id);
> +dom_err:
> + irq_domain_free_fwnode(dom_handle);
> + return err;
> +}
> +
> +static void __init its_acpi_probe(void)
> +{
> + acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR,
> + gic_acpi_parse_madt_its, 0);
> +}
> +#else
> +static void __init its_acpi_probe(void) { }
> +#endif
> +
> int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
> struct irq_domain *parent_domain)
> {
> @@ -1802,7 +1859,7 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
> if (of_node)
> its_of_probe(of_node);
> else
> - return -ENODEV;
> + its_acpi_probe();
>
> if (list_empty(&its_nodes)) {
> pr_warn("ITS: No ITS available, not enabling LPIs\n");
>
Reviewed-by: Hanjun Guo <hanjun.guo@...aro.org>
Thanks
Hanjun
Powered by blists - more mailing lists