linux-kernel - [RFC PATCH v2 2/9] dt-bindings: mailbox: Add Amlogic Meson MHU Bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1466503374-28841-3-git-send-email-narmstrong@baylibre.com>
Date:	Tue, 21 Jun 2016 12:02:47 +0200
From:	Neil Armstrong <narmstrong@...libre.com>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	sudeep.holla@....com
Cc:	Neil Armstrong <narmstrong@...libre.com>,
	linux-amlogic@...ts.infradead.org, khilman@...libre.com,
	heiko@...ech.de, wxt@...k-chips.com, frank.wang@...k-chips.com
Subject: [RFC PATCH v2 2/9] dt-bindings: mailbox: Add Amlogic Meson MHU Bindings

Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
 .../devicetree/bindings/mailbox/meson-mhu.txt      | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/meson-mhu.txt

diff --git a/Documentation/devicetree/bindings/mailbox/meson-mhu.txt b/Documentation/devicetree/bindings/mailbox/meson-mhu.txt
new file mode 100644
index 0000000..4a80b44
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/meson-mhu.txt
@@ -0,0 +1,33 @@
+Amlogic Meson MHU Mailbox Driver
+================================
+
+The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller
+that has 2 independent channels/links to communicate with remote processor(s).
+MHU links are hardwired on a platform. A link raises interrupt for any
+received data. However, there is no specified way of knowing if the sent
+data has been read by the remote. This driver assumes the sender polls
+STAT register and the remote clears it after having read the data.
+
+Mailbox Device Node:
+====================
+
+Required properties:
+--------------------
+- compatible:		Shall be "amlogic,meson-gxbb-mhu"
+- reg:			Contains the mailbox register address range (base
+			address and length)
+- #mbox-cells		Shall be 1 - the index of the channel needed.
+- interrupts:		Contains the interrupt information corresponding to
+			each of the 2 links of MHU.
+
+Example:
+--------
+
+	mailbox: mailbox@...3c400 {
+		#mbox-cells = <1>;
+		compatible = "amlogic,meson-gxbb-mhu";
+		reg = <0 0xc883c400 0 0x4c>;
+		interrupts = <0 209 IRQ_TYPE_EDGE_RISING>,
+			   <0 210 IRQ_TYPE_EDGE_RISING>;
+		#mbox-cells = <1>;
+	};
-- 
2.7.0