| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Jun 2016 14:45:42 +0300
From: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
To: Jan Kiszka <jan.kiszka@...mens.com>
Cc: Mark Rutland <mark.rutland@....com>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Jailhouse <jailhouse-dev@...glegroups.com>,
Måns Rullgård <mans@...x.de>,
Antonios Motakis <antonios.motakis@...wei.com>
Subject: Re: Using DT overlays for adding virtual hardware
Hi Jan,
> On Jun 21, 2016, at 14:43 , Jan Kiszka <jan.kiszka@...mens.com> wrote:
>
> On 2016-06-21 13:35, Pantelis Antoniou wrote:
>> Hi Jan,
>>
>>> On Jun 21, 2016, at 14:22 , Jan Kiszka <jan.kiszka@...mens.com> wrote:
>>>
>>> On 2016-06-21 12:24, Pantelis Antoniou wrote:
>>>> Hi Jan,
>>>>
>>>>> On Jun 21, 2016, at 13:13 , Jan Kiszka <jan.kiszka@...mens.com> wrote:
>>>>>
>>>>> Hi Pantelis,
>>>>>
>>>>> coming back to this topic:
>>>>>
>>>>> On 2016-06-09 08:03, Jan Kiszka wrote:
>>>>>> OK, trial and error, and some interesting insights: I've played with DT
>>>>>> fragments and the overlay configfs patch of Pantelis [1] to have a
>>>>>> convenient start. Interestingly, I wasn't able to load a fragment that
>>>>>> followed the format specification for overlays ("Failed to resolve
>>>>>> tree"). By chance, I got this one working:
>>>>>>
>>>>>> /dts-v1/;
>>>>>> / {
>>>>>> fragment {
>>>>>> target-path = "/soc@...00000";
>>>>>> __overlay__ {
>>>>>> #address-cells = <2>;
>>>>>> #size-cells = <2>;
>>>>>>
>>>>>> vpci@...000000 {
>>>>>> compatible = "pci-host-cam-generic";
>>>>>> device_type = "pci";
>>>>>> #address-cells = <3>;
>>>>>> #size-cells = <2>;
>>>>>> reg = <0 0x2000000 0 0x1000000>;
>>>>>> ranges =
>>>>>> <0x02000000 0x00 0x10000000 0x00 0x10000000 0x00 0x30000000>;
>>>>>> };
>>>>>> };
>>>>>> };
>>>>>> };
>>>>>>
>>>>>> It successfully makes a BananaPi kernel add a pci host with the
>>>>>> specified config space and MMIO window.
>>>>>>
>>>>>> [ 81.619583] PCI host bridge /soc@...00000/vpci@...000000 ranges:
>>>>>> [ 81.619610] No bus range found for /soc@...00000/vpci@...000000, using [bus 00-ff]
>>>>>> [ 81.619634] MEM 0x10000000..0x3fffffff -> 0x10000000
>>>>>> [ 81.620482] pci-host-generic 2000000.vpci: ECAM at [mem 0x02000000-0x02ffffff] for [bus 00-ff]
>>>>>> [ 81.620779] pci-host-generic 2000000.vpci: PCI host bridge to bus 0000:00
>>>>>> [ 81.620801] pci_bus 0000:00: root bus resource [bus 00-ff]
>>>>>> [ 81.620814] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3fffffff]
>>>>>> [ 81.620851] PCI: bus0: Fast back to back transfers enabled
>>>>>>
>>>>>> So, no /plugin/ statement, no phandles resolution. This format even
>>>>>> builds with the in-kernel dtc. Any explanations? Does the code make
>>>>>> sense (at least it builds without warnings)?
>>>>>>
>>>>>> Now I need to back this with some code in Jailhouse.
>>>>>
>>>>> Meanwhile I got a virtual PCI device recognized by Linux when running
>>>>> over Jailhouse. However, my hack above doesn't get me to proper
>>>>> interrupt mapping yet. This is what I was trying with upstream dtc:
>>>>>
>>>>> /dts-v1/;
>>>>> / {
>>>>> compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
>>>>>
>>>>> fragment@0 {
>>>>> target-path = "/soc@...00000";
>>>>> __overlay__ {
>>>>> #address-cells = <2>;
>>>>> #size-cells = <2>;
>>>>>
>>>>> vpci@...0000 {
>>>>> compatible = "pci-host-ecam-generic";
>>>>> device_type = "pci";
>>>>> bus-range = <0 0>;
>>>>> #address-cells = <3>;
>>>>> #size-cells = <2>;
>>>>> #interrupt-cells = <1>;
>>>>> interrupt-map-mask = <0 0 0 7>;
>>>>> interrupt-map = <0 0 0 1 &gic 0 0 0 123 4>,
>>>>> <0 0 0 2 &gic 0 0 0 124 4>,
>>>>> <0 0 0 3 &gic 0 0 0 125 4>,
>>>>> <0 0 0 4 &gic 0 0 0 126 4>;
>>>>> reg = <0 0x2000000 0 0x100000>;
>>>>> ranges =
>>>>> <0x02000000 0x00 0x10000000 0x00 0x10000000 0x00 0x30000000>;
>>>>> };
>>>>> };
>>>>> };
>>>>>
>>>>> gic: fragment@1 {
>>>>> target-path = "/soc@...00000/interrupt-controller@...81000";
>>>>> __overlay__ {
>>>>> };
>>>>> };
>>>>> };
>>>>>
>>>>
>>>> ^ This is not going to work: You need the reference to the real gic not the empty fragment
>>>> here that has a target there.
>>>>
>>>> You need to compile with the correct dtc, and you also need to compile the base dts
>>>> with dtc too, using the -@ flag. You can hack around it by adding something like
>>>>
>>>> __symbols__ {
>>>> gic = "/soc@...00000/interrupt-controller@...81000”;
>>>> };
>>>>
>>>> But you really need the __symbols__ node of the base dts generated by the dtc proper cause
>>>> the above is a dirty hack.
>>>>
>>>
>>> OK, re-building the kernel with DTC="/your/dtc -@", thus building the
>>> base dtb with symbols, fixes proper overlay format loading.
>>>
>>> However, no luck yet with the interrupt topic - maybe a different issue.
>>> Digging deeper…
>>>
>> Remove the gic: fragment and build both the kernel and the overlay with the -@ option.
>> That’s what makes it not to work.
>
> That's what I did, of course.
>
> I've now
>
> /dts-v1/;
> // magic: 0xd00dfeed
> // totalsize: 0x448 (1096)
> // off_dt_struct: 0x38
> // off_dt_strings: 0x3c0
> // off_mem_rsvmap: 0x28
> // version: 17
> // last_comp_version: 16
> // boot_cpuid_phys: 0x0
> // size_dt_strings: 0x88
> // size_dt_struct: 0x388
>
> / {
> compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
> fragment@0 {
> target = <0xffffffff>;
> __overlay__ {
> #address-cells = <0x00000002>;
> #size-cells = <0x00000002>;
> vpci@...0000 {
> compatible = "pci-host-ecam-generic";
> device_type = "pci";
> bus-range = <0x00000000 0x00000000>;
> #address-cells = <0x00000003>;
> #size-cells = <0x00000002>;
> #interrupt-cells = <0x00000001>;
> interrupt-map-mask = <0x00000000 0x00000000 0x00000000 0x00000007>;
> interrupt-map = <0x00000000 0x00000000 0x00000000 0x00000001 0xffffffff 0x00000000 0x00000000 0x00000000 0x0000007b 0x00000004 0x00000000 0x00000000 0x00000000 0x00000002 0xffffffff 0x00000000 0x00000000 0x00000000 0x0000007c 0x00000004 0x00000000 0x00000000 0x00000000 0x00000003 0xffffffff 0x00000000 0x00000000 0x00000000 0x0000007d 0x00000004 0x00000000 0x00000000 0x00000000 0x00000004 0xffffffff 0x00000000 0x00000000 0x00000000 0x0000007e 0x00000004>;
> reg = <0x00000000 0x02000000 0x00000000 0x00100000>;
> ranges = <0x02000000 0x00000000 0x10000000 0x00000000 0x10000000 0x00000000 0x30000000>;
> };
> };
> };
> __symbols__ {
> };
> __fixups__ {
> soc = "/fragment@0:target:0";
> gic = "/fragment@..._overlay__/vpci@...0000:interrupt-map:16", "/fragment@..._overlay__/vpci@...0000:interrupt-map:56", "/fragment@..._overlay__/vpci@...0000:interrupt-map:96", "/fragment@..._overlay__/vpci@...0000:interrupt-map:136";
> };
> __local_fixups__ {
> };
> };
>
> and a base dtb with a symbols section and all the required ones
> included.
>
OK, this should make things work. Did you try sticking this in the base dts and see if it works there?
> Jan
>
> --
> Siemens AG, Corporate Technology, CT RDA ITP SES-DE
> Corporate Competence Center Embedded Linux
Powered by blists - more mailing lists