[ 0.000000] Linux version 4.7.0-rc4+ (jejb@jarvis) (gcc version 4.8.5 (SUSE Linux) ) #2 SMP PREEMPT Tue Jun 21 07:59:21 EDT 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force drm.debug=14 [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069537fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000069539000-0x0000000069562fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000069563000-0x00000000695bdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000695be000-0x0000000069daefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000069daf000-0x000000007907dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007907e000-0x00000000793f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079c01000-0x000000007a4fefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a4ff000-0x000000007a4fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a500000-0x000000007a5fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x67a09018-0x67a19057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000067a09017] usable [ 0.000000] reserve setup_data: [mem 0x0000000067a09018-0x0000000067a19057] usable [ 0.000000] reserve setup_data: [mem 0x0000000067a19058-0x0000000069537fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000069539000-0x0000000069562fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000069563000-0x00000000695bdfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000695be000-0x0000000069daefff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000069daf000-0x000000007907dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000007907e000-0x00000000793f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000079c01000-0x000000007a4fefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007a4ff000-0x000000007a4fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000007a500000-0x000000007a5fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x7941a000 ACPI 2.0=0x7941a000 SMBIOS=0xf0000 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9350/07TYC2, BIOS 1.4.3 06/02/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7a500 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02073000, 0x02073fff] PGTABLE [ 0.000000] BRK [0x02074000, 0x02074fff] PGTABLE [ 0.000000] BRK [0x02075000, 0x02075fff] PGTABLE [ 0.000000] BRK [0x02076000, 0x02076fff] PGTABLE [ 0.000000] BRK [0x02077000, 0x02077fff] PGTABLE [ 0.000000] BRK [0x02078000, 0x02078fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x2f6c7000-0x2ff3dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007941A000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x000000007941A0B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007943A9B8 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007941A230 020784 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x0000000079C00F80 000040 [ 0.000000] ACPI: APIC 0x000000007943AAC8 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007943AB50 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007943AB98 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007943AC38 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007943AC78 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x000000007943ACB0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: LPIT 0x000000007943AFC8 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007943B060 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007943B2A8 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007943DE58 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x000000007943EA40 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000007943EA78 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007943EAD0 000737 (v02 INTEL xh_rvp07 00000000 INTL 20120913) [ 0.000000] ACPI: BOOT 0x000000007943F208 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000007943F230 0035AE (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000794427E0 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x0000000079442828 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: MSDM 0x00000000794436A0 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000794436F8 003B57 (v02 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SLIC 0x0000000079447250 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: TCPA 0x00000000794473C8 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013) [ 0.000000] ACPI: BGRT 0x0000000079447400 000038 (v00 ?\xffffffbdq{ 01072009 AMI 00010013) [ 0.000000] ACPI: DMAR 0x0000000079447438 0000F0 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! 0x0000000079447528 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x27efe6000-0x27effcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000069537fff] [ 0.000000] node 0: [mem 0x0000000069563000-0x00000000695bdfff] [ 0.000000] node 0: [mem 0x0000000069daf000-0x000000007907dfff] [ 0.000000] node 0: [mem 0x000000007a4ff000-0x000000007a4fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff] [ 0.000000] On node 0 totalpages: 2062334 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7650 pages used for memmap [ 0.000000] DMA32 zone: 489571 pages, LIFO batch:31 [ 0.000000] Normal zone: 24512 pages used for memmap [ 0.000000] Normal zone: 1568768 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x67a09000-0x67a09fff] [ 0.000000] PM: Registered nosave memory: [mem 0x67a19000-0x67a19fff] [ 0.000000] PM: Registered nosave memory: [mem 0x69538000-0x69538fff] [ 0.000000] PM: Registered nosave memory: [mem 0x69539000-0x69562fff] [ 0.000000] PM: Registered nosave memory: [mem 0x695be000-0x69daefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7907e000-0x793f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x793f9000-0x79448fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79449000-0x79c00fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79c01000-0x7a4fefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a500000-0x7a5fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a600000-0x7bffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88027ec00000 s104088 r8192 d31080 u524288 [ 0.000000] pcpu-alloc: s104088 r8192 d31080 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2030087 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force drm.debug=14 [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 3705472K/8249336K available (7116K kernel code, 1183K rwdata, 3124K rodata, 1688K init, 1644K bss, 498416K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:1024 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 2 loops [ 0.000000] tsc: Detected 2399.965 MHz processor [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.93 BogoMIPS (lpj=9599860) [ 0.000026] pid_max: default: 32768 minimum: 301 [ 0.000043] ACPI: Core revision 20160422 [ 0.000953] Security Framework initialized [ 0.000958] AppArmor: AppArmor initialized [ 0.001413] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002920] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003643] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003651] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003918] CPU: Physical Processor ID: 0 [ 0.003920] CPU: Processor Core ID: 0 [ 0.003924] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003925] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003929] mce: CPU supports 8 MCE banks [ 0.003938] CPU0: Thermal monitoring enabled (TM1) [ 0.003954] process: using mwait in idle threads [ 0.003956] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.003957] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.004318] Freeing SMP alternatives memory: 28K (ffffffff81ecf000 - ffffffff81ed6000) [ 0.015534] ftrace: allocating 27630 entries in 108 pages [ 0.027242] smpboot: Max logical packages: 2 [ 0.027245] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.027250] DMAR: Host address width 39 [ 0.027252] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.027259] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.027261] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.027265] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.027266] DMAR: RMRR base: 0x0000007918b000 end: 0x000000791aafff [ 0.027267] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff [ 0.027269] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.027269] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.027271] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.027272] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.027273] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.027275] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.027464] DMAR: DRHD: handling fault status reg 2 [ 0.027469] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 6824 [fault reason 37] Blocked a compatibility format interrupt request [ 0.028706] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.028707] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.032821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.073151] TSC deadline timer enabled [ 0.073155] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.073159] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver. [ 0.073188] ... version: 4 [ 0.073189] ... bit width: 48 [ 0.073190] ... generic registers: 4 [ 0.073191] ... value mask: 0000ffffffffffff [ 0.073192] ... max period: 0000ffffffffffff [ 0.073193] ... fixed-purpose events: 3 [ 0.073193] ... event mask: 000000070000000f [ 0.101312] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.121318] x86: Booting SMP configuration: [ 0.121319] .... node #0, CPUs: #1 #2 #3 [ 0.395465] x86: Booted up 1 node, 4 CPUs [ 0.395469] smpboot: Total of 4 processors activated (19202.90 BogoMIPS) [ 0.415063] node 0 initialised, 1011362 pages in 12ms [ 0.423528] devtmpfs: initialized [ 0.423591] x86/mm: Memory block size: 128MB [ 0.435486] PM: Registering ACPI NVS region [mem 0x69538000-0x69538fff] (4096 bytes) [ 0.435488] PM: Registering ACPI NVS region [mem 0x79449000-0x79c00fff] (8093696 bytes) [ 0.435706] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.447453] pinctrl core: initialized pinctrl subsystem [ 0.447572] RTC time: 13:41:03, date: 06/21/16 [ 0.455547] NET: Registered protocol family 16 [ 0.467471] cpuidle: using governor ladder [ 0.479486] cpuidle: using governor menu [ 0.479537] Simple Boot Flag at 0x47 set to 0x80 [ 0.479565] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.479566] ACPI: bus type PCI registered [ 0.479568] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.499573] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.499575] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.499583] PCI: Using configuration type 1 for base access [ 0.499589] dmi type 0xB1 record - unknown flag [ 0.523634] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.523635] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.547623] ACPI: Added _OSI(Module Device) [ 0.547624] ACPI: Added _OSI(Processor Device) [ 0.547625] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.547626] ACPI: Added _OSI(Processor Aggregator Device) [ 0.582241] ACPI: Executed 21 blocks of module-level executable AML code [ 0.596021] ACPI: Executed 3 blocks of module-level executable AML code [ 0.600254] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.616230] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.724556] ACPI: Dynamic OEM Table Load: [ 0.724566] ACPI: SSDT 0xFFFF88027E7D6800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.725679] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.727347] ACPI: Dynamic OEM Table Load: [ 0.727353] ACPI: SSDT 0xFFFF88027E7DC000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.729295] ACPI: Dynamic OEM Table Load: [ 0.729301] ACPI: SSDT 0xFFFF88027E7D6000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.730880] ACPI: Dynamic OEM Table Load: [ 0.730885] ACPI: SSDT 0xFFFF88027EC5DA00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.734413] ACPI : EC: EC started [ 0.768660] ACPI: Interpreter enabled [ 0.768706] ACPI: (supports S0 S3 S4 S5) [ 0.768707] ACPI: Using IOAPIC for interrupt routing [ 0.768755] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.770776] ACPI: Power Resource [PG00] (on) [ 0.771250] ACPI: Power Resource [PG01] (on) [ 0.771713] ACPI: Power Resource [PG02] (on) [ 0.774123] ACPI: Power Resource [WRST] (off) [ 0.774605] ACPI: Power Resource [WRST] (off) [ 0.775078] ACPI: Power Resource [WRST] (off) [ 0.775547] ACPI: Power Resource [WRST] (off) [ 0.776016] ACPI: Power Resource [WRST] (off) [ 0.776489] ACPI: Power Resource [WRST] (off) [ 0.776956] ACPI: Power Resource [WRST] (off) [ 0.777424] ACPI: Power Resource [WRST] (off) [ 0.777899] ACPI: Power Resource [WRST] (off) [ 0.778401] ACPI: Power Resource [WRST] (off) [ 0.778881] ACPI: Power Resource [WRST] (off) [ 0.779347] ACPI: Power Resource [WRST] (off) [ 0.779818] ACPI: Power Resource [WRST] (off) [ 0.780283] ACPI: Power Resource [WRST] (off) [ 0.780752] ACPI: Power Resource [WRST] (off) [ 0.781218] ACPI: Power Resource [WRST] (off) [ 0.781688] ACPI: Power Resource [WRST] (off) [ 0.782156] ACPI: Power Resource [WRST] (off) [ 0.782630] ACPI: Power Resource [WRST] (off) [ 0.783097] ACPI: Power Resource [WRST] (off) [ 0.799989] ACPI: Power Resource [FN00] (off) [ 0.800121] ACPI: Power Resource [FN01] (off) [ 0.800247] ACPI: Power Resource [FN02] (off) [ 0.800372] ACPI: Power Resource [FN03] (off) [ 0.800498] ACPI: Power Resource [FN04] (off) [ 0.801952] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.801959] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.802011] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID [ 0.802012] _OSC request data: 1 1f 0 [ 0.802016] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.802811] PCI host bridge to bus 0000:00 [ 0.802813] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.802815] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.802816] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.802818] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.802819] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.802820] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.802822] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.802823] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.802824] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.802825] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.802827] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.802828] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.802829] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.802830] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.802832] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.802833] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.802835] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.802842] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.802993] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.803002] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit] [ 0.803008] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.803013] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.803181] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.803192] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit] [ 0.803433] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.803453] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit] [ 0.803527] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.803672] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.803713] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.803733] pci 0000:00:14.2: reg 0x10: [mem 0xdc338000-0xdc338fff 64bit] [ 0.804007] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.804203] pci 0000:00:15.0: reg 0x10: [mem 0xdc337000-0xdc337fff 64bit] [ 0.805201] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.805397] pci 0000:00:15.1: reg 0x10: [mem 0xdc336000-0xdc336fff 64bit] [ 0.806323] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.806339] pci 0000:00:16.0: reg 0x10: [mem 0xdc335000-0xdc335fff 64bit] [ 0.806417] pci 0000:00:16.0: PME# supported from D3hot [ 0.806599] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.806614] pci 0000:00:17.0: reg 0x10: [mem 0xdc330000-0xdc331fff] [ 0.806623] pci 0000:00:17.0: reg 0x14: [mem 0xdc334000-0xdc3340ff] [ 0.806632] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.806642] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.806651] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.806660] pci 0000:00:17.0: reg 0x24: [mem 0xdc333000-0xdc3337ff] [ 0.806706] pci 0000:00:17.0: PME# supported from D3hot [ 0.806887] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.806962] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.807140] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.807186] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.807258] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.807435] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.807478] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.807550] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.807723] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.807765] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.807833] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.808005] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.808071] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.808339] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.808350] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff] [ 0.808551] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380 [ 0.808574] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit] [ 0.808601] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit] [ 0.808652] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.808872] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.808914] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.808962] pci 0000:00:1f.4: reg 0x10: [mem 0xdc332000-0xdc3320ff 64bit] [ 0.809034] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.809392] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.809397] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.809402] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.809551] pci 0000:3a:00.0: [8086:095a] type 00 class 0x028000 [ 0.809592] pci 0000:3a:00.0: reg 0x10: [mem 0xdc200000-0xdc201fff 64bit] [ 0.809781] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.809920] pci 0000:3a:00.0: System wakeup disabled by ACPI [ 0.814438] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.814443] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.814582] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.814611] pci 0000:3b:00.0: reg 0x14: [mem 0xdc100000-0xdc100fff] [ 0.814734] pci 0000:3b:00.0: supports D1 D2 [ 0.814735] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.814841] pci 0000:3b:00.0: System wakeup disabled by ACPI [ 0.822440] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.822444] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff] [ 0.822573] pci 0000:3c:00.0: [144d:a802] type 00 class 0x010802 [ 0.822593] pci 0000:3c:00.0: reg 0x10: [mem 0xdc000000-0xdc003fff 64bit] [ 0.822602] pci 0000:3c:00.0: reg 0x18: [io 0xe000-0xe0ff] [ 0.822806] pci 0000:3c:00.0: System wakeup disabled by ACPI [ 0.830453] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.830456] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff] [ 0.830459] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.833465] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.833541] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.833613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.833686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.833759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.833831] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.833905] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.833977] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.836244] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.836280] ACPI : EC: EC stopped [ 0.837436] ACPI : EC: GPE = 0x14, I/O: command/status = 0x934, data = 0x930 [ 0.837437] ACPI : EC: EC started [ 0.868878] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.868879] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.868882] vgaarb: loaded [ 0.868883] vgaarb: bridge control possible 0000:00:02.0 [ 0.878563] SCSI subsystem initialized [ 0.878596] libata version 3.00 loaded. [ 0.878696] PCI: Using ACPI for IRQ routing [ 0.902733] PCI: pci_cache_line_size set to 64 bytes [ 0.902876] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.902878] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.902879] e820: reserve RAM buffer [mem 0x67a09018-0x67ffffff] [ 0.902880] e820: reserve RAM buffer [mem 0x69538000-0x6bffffff] [ 0.902882] e820: reserve RAM buffer [mem 0x695be000-0x6bffffff] [ 0.902883] e820: reserve RAM buffer [mem 0x7907e000-0x7bffffff] [ 0.902884] e820: reserve RAM buffer [mem 0x7a500000-0x7bffffff] [ 0.902886] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff] [ 0.902978] NetLabel: Initializing [ 0.902979] NetLabel: domain hash size = 128 [ 0.902980] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.902992] NetLabel: unlabeled traffic allowed by default [ 0.903081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.903086] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.905139] clocksource: Switched to clocksource hpet [ 0.912247] VFS: Disk quotas dquot_6.6.0 [ 0.921195] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.933239] AppArmor: AppArmor Filesystem Enabled [ 0.933268] pnp: PnP ACPI init [ 0.933597] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.933599] system 00:00: [io 0xffff] has been reserved [ 0.933601] system 00:00: [io 0xffff] has been reserved [ 0.933602] system 00:00: [io 0xffff] has been reserved [ 0.933604] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.933605] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.933608] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.933734] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.933784] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.933787] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.933909] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.933934] pnp 00:04: Plug and Play ACPI device, IDs DLL0704 PNP0f13 (active) [ 0.934246] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.934248] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.934250] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.934251] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.934253] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.934254] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.934256] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.934258] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.934259] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.934261] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.934263] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.934313] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.934315] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.934317] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.934319] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.934320] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.934322] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.934323] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.934325] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.934703] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.934706] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.936252] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.936254] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.936256] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.937227] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.943196] pnp: PnP ACPI: found 10 devices [ 0.951728] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.951739] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 0.951761] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.951763] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.951766] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.951768] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.951770] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.951775] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.951778] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.951783] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.951787] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.951795] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.951799] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff] [ 0.951805] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.951807] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff] [ 0.951811] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.951818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.951819] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.951821] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.951822] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.951823] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.951824] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.951826] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.951827] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.951828] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.951830] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.951831] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.951832] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.951833] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.951835] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.951836] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff window] [ 0.951837] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window] [ 0.951839] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.951840] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.951841] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.951843] pci_bus 0000:3a: resource 1 [mem 0xdc200000-0xdc2fffff] [ 0.951844] pci_bus 0000:3b: resource 1 [mem 0xdc100000-0xdc1fffff] [ 0.951845] pci_bus 0000:3c: resource 0 [io 0xe000-0xefff] [ 0.951847] pci_bus 0000:3c: resource 1 [mem 0xdc000000-0xdc0fffff] [ 1.013202] NET: Registered protocol family 2 [ 1.029247] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.029359] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.029464] TCP: Hash tables configured (established 65536 bind 65536) [ 1.029481] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.029501] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.053197] NET: Registered protocol family 1 [ 1.053210] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.054334] PCI: CLS 0 bytes, default 64 [ 1.054376] Unpacking initramfs... [ 1.985846] Freeing initrd memory: 8668K (ffff88002f6c7000 - ffff88002ff3e000) [ 2.001226] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0 [ 2.001230] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1 [ 2.001258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.001260] software IO TLB [mem 0x63a09000-0x67a09000] (64MB) mapped at [ffff880063a09000-ffff880067a08fff] [ 2.001301] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 2.001303] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.001303] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.001304] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.001305] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.001306] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 2.001367] Scanning for low memory corruption every 60 seconds [ 2.017344] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 2.029213] audit: initializing netlink subsys (disabled) [ 2.029228] audit: type=2000 audit(1466516463.992:1): initialized [ 2.029812] workingset: timestamp_bits=34 max_order=21 bucket_order=0 [ 2.029847] zbud: loaded [ 2.197226] Key type big_key registered [ 2.198011] Key type asymmetric registered [ 2.198013] Asymmetric key parser 'x509' registered [ 2.213289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.213354] io scheduler noop registered [ 2.213355] io scheduler deadline registered [ 2.229258] io scheduler cfq registered (default) [ 2.229975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.229981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.230001] efifb: probing for efifb [ 2.230024] efifb: framebuffer at 0x90000000, using 22500k, total 22500k [ 2.230025] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 2.230026] efifb: scrolling: redraw [ 2.230027] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.241039] Console: switching to colour frame buffer device 400x112 [ 2.251900] fb0: EFI VGA frame buffer device [ 2.251907] intel_idle: MWAIT substates: 0x11142120 [ 2.251908] intel_idle: v0.4.1 model 0x4E [ 2.252123] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.252255] GHES: HEST is not enabled! [ 2.252330] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.255069] Non-volatile memory driver v1.3 [ 2.255131] Linux agpgart interface v0.103 [ 2.255581] ahci 0000:00:17.0: version 3.0 [ 2.255768] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x0 impl SATA mode [ 2.255770] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.256791] scsi host0: ahci [ 2.256990] scsi host1: ahci [ 2.257274] scsi host2: ahci [ 2.257495] scsi host3: ahci [ 2.257741] scsi host4: ahci [ 2.257936] scsi host5: ahci [ 2.258171] scsi host6: ahci [ 2.258399] scsi host7: ahci [ 2.258454] ata1: DUMMY [ 2.258455] ata2: DUMMY [ 2.258456] ata3: DUMMY [ 2.258457] ata4: DUMMY [ 2.258458] ata5: DUMMY [ 2.258458] ata6: DUMMY [ 2.258459] ata7: DUMMY [ 2.258460] ata8: DUMMY [ 2.258527] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.259066] i8042: Warning: Keylock active [ 2.261362] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.261392] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.261504] mousedev: PS/2 mouse device common for all mice [ 2.261663] rtc_cmos 00:01: RTC can wake from S4 [ 2.262186] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.262269] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.262278] intel_pstate: Intel P-state driver initializing [ 2.262583] intel_pstate: HWP enabled [ 2.262588] ledtrig-cpu: registered to indicate activity on CPUs [ 2.262589] EFI Variables Facility v0.08 2004-May-17 [ 2.262800] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.267289] hidraw: raw HID events driver (C) Jiri Kosina [ 2.267301] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002) [ 2.357421] NET: Registered protocol family 10 [ 2.357920] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x8a [ 2.357960] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x8a [ 2.357971] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x8a [ 2.358026] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x8a [ 2.358114] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.358337] registered taskstats version 1 [ 2.358352] zswap: loaded using pool lzo/zbud [ 2.362639] Key type encrypted registered [ 2.362642] AppArmor: AppArmor sha1 policy hashing enabled [ 2.364081] Magic number: 4:90:686 [ 2.364083] hash matches drivers/base/power/main.c:1028 [ 2.364362] rtc_cmos 00:01: setting system clock to 2016-06-21 13:41:05 UTC (1466516465) [ 2.364463] PM: Checking hibernation image partition /dev/nvme0n1p2 [ 3.001391] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 3.001395] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 3.089759] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734] [ 3.123622] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..] [ 3.183379] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3038, fw id: 2011643 [ 3.225560] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 3.228693] PM: Hibernation image not present or could not be loaded. [ 3.229612] Freeing unused kernel memory: 1688K (ffffffff81d29000 - ffffffff81ecf000) [ 3.229615] Write protecting the kernel read-only data: 12288k [ 3.230043] Freeing unused kernel memory: 1060K (ffff8800016f7000 - ffff880001800000) [ 3.231681] Freeing unused kernel memory: 972K (ffff880001b0d000 - ffff880001c00000) [ 3.234167] random: systemd urandom read with 19 bits of entropy available [ 3.256105] systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR) [ 3.256245] systemd[1]: Detected architecture 'x86-64'. [ 3.256247] systemd[1]: Running in initial RAM disk. [ 3.256296] systemd[1]: Set hostname to . [ 3.285809] systemd[1]: Expecting device dev-disk-by\x2duuid-994363fd\x2dc12c\x2d4c6c\x2d92e9\x2d85e8ac695cf9.device... [ 3.285846] systemd[1]: Starting Timers. [ 3.285861] systemd[1]: Reached target Timers. [ 3.285875] systemd[1]: Starting -.slice. [ 3.305375] systemd[1]: Created slice -.slice. [ 3.305401] systemd[1]: Starting udev Kernel Socket. [ 3.305430] systemd[1]: Listening on udev Kernel Socket. [ 3.305448] systemd[1]: Starting udev Control Socket. [ 3.305477] systemd[1]: Listening on udev Control Socket. [ 3.305492] systemd[1]: Starting Journal Socket. [ 3.305524] systemd[1]: Listening on Journal Socket. [ 3.305541] systemd[1]: Starting Sockets. [ 3.305554] systemd[1]: Reached target Sockets. [ 3.305568] systemd[1]: Starting System Slice. [ 3.305679] systemd[1]: Created slice System Slice. [ 3.305694] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 3.305798] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.305864] systemd[1]: Starting dracut cmdline hook... [ 3.306223] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.306662] systemd[1]: Starting Load Kernel Modules... [ 3.307039] systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm... [ 3.307438] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ 3.307565] systemd[1]: Starting Journal Service... [ 3.309389] systemd[1]: Starting Slices. [ 3.309411] systemd[1]: Reached target Slices. [ 3.309444] systemd[1]: Starting Setup Virtual Console... [ 3.309874] systemd[1]: Starting Swap. [ 3.309895] systemd[1]: Reached target Swap. [ 3.309919] systemd[1]: Starting Local File Systems. [ 3.309936] systemd[1]: Reached target Local File Systems. [ 3.310325] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3.310554] systemd[1]: Started Load Kernel Modules. [ 3.312324] systemd[1]: Starting Apply Kernel Variables... [ 3.312828] systemd[1]: Starting Create static device nodes in /dev... [ 3.315799] systemd[1]: Started Apply Kernel Variables. [ 3.320609] systemd[1]: Started Create static device nodes in /dev. [ 3.333058] systemd[1]: Started Setup Virtual Console. [ 3.355029] systemd[1]: Started Journal Service. [ 3.411244] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 3.412985] ACPI: Lid Switch [LID0] [ 3.413046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 3.414049] ACPI: Power Button [PBTN] [ 3.414118] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 3.414168] ACPI: Sleep Button [SBTN] [ 3.414222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 3.414264] ACPI: Power Button [PWRF] [ 3.439311] ACPI: bus type USB registered [ 3.439330] usbcore: registered new interface driver usbfs [ 3.439338] usbcore: registered new interface driver hub [ 3.439357] usbcore: registered new device driver usb [ 3.439915] [drm] Initialized drm 1.1.0 20060810 [ 3.440954] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.440971] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.442431] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 3.442454] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.442781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.442783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.442784] usb usb1: Product: xHCI Host Controller [ 3.442792] usb usb1: Manufacturer: Linux 4.7.0-rc4+ xhci-hcd [ 3.442794] usb usb1: SerialNumber: 0000:00:14.0 [ 3.443030] hub 1-0:1.0: USB hub found [ 3.443107] hub 1-0:1.0: 12 ports detected [ 3.450569] rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 124 [ 3.459309] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.459315] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.459371] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.459373] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.459374] usb usb2: Product: xHCI Host Controller [ 3.459376] usb usb2: Manufacturer: Linux 4.7.0-rc4+ xhci-hcd [ 3.459377] usb usb2: SerialNumber: 0000:00:14.0 [ 3.459551] hub 2-0:1.0: USB hub found [ 3.459582] hub 2-0:1.0: 6 ports detected [ 3.461544] nvme nvme0: pci function 0000:3c:00.0 [ 3.475143] usb: port power management may be unreliable [ 3.478669] [drm:intel_detect_pch] Found SunrisePoint LP PCH [ 3.478673] [drm:get_allowed_dc_mask] Allowed DC state mask 03 [ 3.493252] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x1916 rev=0x07 flags=need_gfx_hws,is_skylake,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 3.493513] [drm:intel_device_info_runtime_init] slice total: 1 [ 3.493516] [drm:intel_device_info_runtime_init] subslice total: 3 [ 3.493517] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 3.493518] [drm:intel_device_info_runtime_init] EU total: 24 [ 3.493520] [drm:intel_device_info_runtime_init] EU per subslice: 8 [ 3.493521] [drm:intel_device_info_runtime_init] has slice power gating: n [ 3.493522] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 3.493523] [drm:intel_device_info_runtime_init] has EU power gating: y [ 3.493580] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 3.493582] [drm] Memory usable by graphics device = 4096M [ 3.493583] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 3.493584] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 3.493586] [drm:i915_ggtt_init_hw] ppgtt mode: 3 [ 3.493588] checking generic (90000000 15f9000) vs hw (90000000 10000000) [ 3.493589] fb: switching to inteldrmfb from EFI VGA [ 3.493617] Console: switching to colour dummy device 80x25 [ 3.493690] [drm] Replacing VGA console driver [ 3.493731] [drm:intel_opregion_setup] graphic opregion physical addr: 0x79bea018 [ 3.493739] [drm:intel_opregion_setup] Public ACPI methods supported [ 3.493740] [drm:intel_opregion_setup] SWSCI supported [ 3.499676] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 3.499679] [drm:intel_opregion_setup] ASLE supported [ 3.499681] [drm:intel_opregion_setup] ASLE extension supported [ 3.499683] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 3.499749] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.499750] [drm] Driver supports precise vblank timestamp query. [ 3.499752] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 3.499754] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE ", BDB version 203 [ 3.499755] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 3.499757] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 3.501304] [drm:parse_lfp_panel_data] Panel type: 0 (OpRegion) [ 3.501307] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 3.501310] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 3.501313] [drm:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 25180 640 648 744 784 480 482 484 509 0x8 0xa [ 3.501314] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 3.501315] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 3.501317] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 3.501318] [drm:parse_device_mapping] Expected child device config size for VBT version 203 not known; assuming 38 [ 3.501321] [drm:parse_driver_features] DRRS State Enabled:0 [ 3.501323] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 3.501325] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 3.501326] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 3.501328] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [ 3.501329] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 3.501331] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8 [ 3.501383] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 3.501390] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 3.501436] [drm:intel_power_well_enable] enabling power well 1 [ 3.501454] [drm:intel_power_well_enable] enabling MISC IO power well [ 3.501477] [drm:intel_power_well_enable] enabling always-on [ 3.501479] [drm:intel_power_well_enable] enabling DC off [ 3.501481] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 3.501509] [drm:intel_power_well_enable] enabling power well 2 [ 3.501527] [drm:intel_power_well_enable] enabling DDI A/E power well [ 3.501550] [drm:intel_power_well_enable] enabling DDI B power well [ 3.501564] [drm:skl_set_power_well] Enabling DDI B power well [ 3.501568] [drm:intel_power_well_enable] enabling DDI C power well [ 3.501582] [drm:skl_set_power_well] Enabling DDI C power well [ 3.501587] [drm:intel_power_well_enable] enabling DDI D power well [ 3.501600] [drm:skl_set_power_well] Enabling DDI D power well [ 3.501610] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 3.501748] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1.bin [ 3.505479] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec) [ 3.505482] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec) [ 3.505484] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec) [ 3.505485] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec) [ 3.505486] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec) [ 3.505487] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec) [ 3.505488] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec) [ 3.505489] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec) [ 3.505490] [drm:intel_modeset_init] 3 display pipes available. [ 3.505517] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 3.505531] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 3.505535] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz [ 3.505536] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz [ 3.505574] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.505931] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 3.506071] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 3.506072] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.506073] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.506075] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.506077] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 3.506187] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 3.506283] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 3.506858] [drm:intel_dp_get_dpcd] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 [ 3.507776] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 3.507777] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 3.508275] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 3.508279] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 3.508280] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 3.508370] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 3.510571] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26) [ 3.513290] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.513291] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 3.513329] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 3.513360] [drm:intel_dp_init_connector] Adding DP connector on port B [ 3.513396] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 3.513474] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 3.513511] [drm:intel_dp_init_connector] Adding DP connector on port C [ 3.513532] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 3.513604] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 3.513690] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled [ 3.513699] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled [ 3.513708] [drm:intel_modeset_readout_hw_state] [CRTC:34] hw state readout: disabled [ 3.513717] [drm:intel_modeset_readout_hw_state] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1 [ 3.513721] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 3.513726] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 3.513730] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 3.513772] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 3.513777] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A [ 3.513781] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 3.513782] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe A [ 3.513783] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe B [ 3.513784] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe C [ 3.513786] [drm:intel_modeset_readout_hw_state] [ENCODER:52:TMDS-52] hw state readout: disabled, pipe A [ 3.513786] [drm:intel_modeset_readout_hw_state] [ENCODER:54:DP MST-54] hw state readout: disabled, pipe A [ 3.513787] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP MST-55] hw state readout: disabled, pipe B [ 3.513788] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP MST-56] hw state readout: disabled, pipe C [ 3.513795] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: enabled [ 3.513799] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:DP-1] hw state readout: disabled [ 3.513804] [drm:intel_modeset_readout_hw_state] [CONNECTOR:50:HDMI-A-1] hw state readout: disabled [ 3.513808] [drm:intel_modeset_readout_hw_state] [CONNECTOR:53:DP-2] hw state readout: disabled [ 3.513813] [drm:intel_modeset_readout_hw_state] [CONNECTOR:57:HDMI-A-2] hw state readout: disabled [ 3.513887] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880272e63000 for pipe A [ 3.513888] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 3.513889] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.513890] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.513891] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 4348677, gmch_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 [ 3.513892] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.513893] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.513894] [drm:intel_dump_pipe_config] requested mode: [ 3.513896] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 373249 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 3.513897] [drm:intel_dump_pipe_config] adjusted mode: [ 3.513898] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 373249 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 3.513900] [drm:intel_dump_crtc_timings] crtc timings: 373249 3200 3248 3280 3360 1800 1803 1808 1852, type: 0x40 flags: 0xa [ 3.513901] [drm:intel_dump_pipe_config] port clock: 540000 [ 3.513902] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 3.513903] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 3.513904] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.513905] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.513905] [drm:intel_dump_pipe_config] ips: 0 [ 3.513906] [drm:intel_dump_pipe_config] double wide: 0 [ 3.513907] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.513908] [drm:intel_dump_pipe_config] planes on this crtc [ 3.513909] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 3.513910] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 3.513911] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 3.513919] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff880272eb3000 for pipe B [ 3.513919] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.513920] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.513921] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.513922] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.513923] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.513924] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.513925] [drm:intel_dump_pipe_config] requested mode: [ 3.513926] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.513927] [drm:intel_dump_pipe_config] adjusted mode: [ 3.513928] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.513930] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.513930] [drm:intel_dump_pipe_config] port clock: 0 [ 3.513931] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.513932] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 3.513933] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.513934] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.513935] [drm:intel_dump_pipe_config] ips: 0 [ 3.513935] [drm:intel_dump_pipe_config] double wide: 0 [ 3.513936] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.513937] [drm:intel_dump_pipe_config] planes on this crtc [ 3.513938] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = -1 [ 3.513939] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 3.513940] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 3.513951] [drm:intel_dump_pipe_config] [CRTC:34][setup_hw_state] config ffff880272f28800 for pipe C [ 3.513951] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 3.513952] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.513953] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.513954] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.513955] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.513956] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.513957] [drm:intel_dump_pipe_config] requested mode: [ 3.513958] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.513959] [drm:intel_dump_pipe_config] adjusted mode: [ 3.513960] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.513961] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.513962] [drm:intel_dump_pipe_config] port clock: 0 [ 3.513963] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.513964] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 3.513965] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.513966] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.513966] [drm:intel_dump_pipe_config] ips: 0 [ 3.513967] [drm:intel_dump_pipe_config] double wide: 0 [ 3.513968] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.513969] [drm:intel_dump_pipe_config] planes on this crtc [ 3.513970] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 2.0 idx: 6 disabled, scaler_id = -1 [ 3.513971] [drm:intel_dump_pipe_config] CURSOR PLANE:33 plane: 2.3 idx: 7 disabled, scaler_id = -1 [ 3.513972] [drm:intel_dump_pipe_config] STANDARD PLANE:35 plane: 2.1 idx: 8 disabled, scaler_id = -1 [ 3.514337] [drm:intel_power_well_disable] disabling DDI D power well [ 3.514354] [drm:skl_set_power_well] Disabling DDI D power well [ 3.514372] [drm:intel_power_well_disable] disabling DDI C power well [ 3.514391] [drm:skl_set_power_well] Disabling DDI C power well [ 3.514400] [drm:intel_power_well_disable] disabling DDI B power well [ 3.514418] [drm:skl_set_power_well] Disabling DDI B power well [ 3.514436] [drm:intel_power_well_disable] disabling power well 2 [ 3.514510] [drm:skl_set_power_well] Disabling power well 2 [ 3.514547] [drm:skylake_get_initial_plane_config] pipe A with fb: size=3200x1800@32, offset=0, pitch 12800, size 0x15f9000 [ 3.514549] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=15f9000 [ 3.514552] [drm:i915_pages_create_for_stolen] offset=0x0, size=23040000 [ 3.514555] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880272e9db40 [ 3.514764] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 15f9000 [ 3.514765] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [15f9000, fffff000] [ 3.516113] [drm:i915_gem_context_init] LR context support initialized [ 3.516122] [drm:intel_init_pipe_control] render ring pipe control offset: 0x015f9000 [ 3.516188] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 3.516240] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 3.516283] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 3.516323] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 3.516543] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 3.516544] [drm:nop_init_clock_gating] No clock gating settings or workarounds applied. [ 3.516616] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 3.516618] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 3.516619] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 3.516620] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 3.516620] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 3.516622] [drm:intel_fbdev_init_bios] pipe A area: 3200x1800, bpp: 32, size: 23040000 [ 3.516623] [drm:intel_fbdev_init_bios] fb big enough for plane A (23040000 >= 23040000) [ 3.516624] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 3.516625] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 3.516625] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 3.516728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 3.516729] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 3.517922] [drm:intel_didl_outputs] 9 outputs detected [ 3.519699] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.520857] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 3.520996] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 [ 3.524757] [drm:drm_dp_dpcd_access] too many retries, giving up [ 3.524766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] status updated from unknown to connected [ 3.524782] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.524785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 3.524787] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 3.524789] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 3.524790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 3.524791] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 3.524793] [drm:intel_power_well_enable] enabling power well 2 [ 3.524806] [drm:skl_set_power_well] Enabling power well 2 [ 3.524868] [drm:intel_power_well_disable] disabling power well 2 [ 3.524942] [drm:skl_set_power_well] Disabling power well 2 [ 3.524956] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] status updated from unknown to disconnected [ 3.524957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 3.524958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 3.524959] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 3.573936] nvme0n1: p1 p2 p3 p4 [ 3.649251] [drm:intel_hdmi_detect] HDMI live status down [ 3.649256] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] status updated from unknown to disconnected [ 3.649259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 3.649262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 3.649264] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 3.649267] [drm:intel_power_well_enable] enabling power well 2 [ 3.649277] [drm:skl_set_power_well] Enabling power well 2 [ 3.649345] [drm:intel_power_well_disable] disabling power well 2 [ 3.649422] [drm:skl_set_power_well] Disabling power well 2 [ 3.649441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] status updated from unknown to disconnected [ 3.649443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 3.649445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 3.649446] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 3.657283] raid6: sse2x1 gen() 9096 MB/s [ 3.725261] raid6: sse2x1 xor() 6766 MB/s [ 3.777269] [drm:intel_hdmi_detect] HDMI live status down [ 3.777273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] status updated from unknown to disconnected [ 3.777275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 3.777277] [drm:drm_setup_crtcs] [ 3.777279] [drm:drm_enable_connectors] connector 37 enabled? yes [ 3.777280] [drm:drm_enable_connectors] connector 46 enabled? no [ 3.777281] [drm:drm_enable_connectors] connector 50 enabled? no [ 3.777282] [drm:drm_enable_connectors] connector 53 enabled? no [ 3.777283] [drm:drm_enable_connectors] connector 57 enabled? no [ 3.777286] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 3.777287] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 3.777290] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 3200x1800 [ 3.777291] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 3.777292] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 3.777293] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 3.777295] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 3.777296] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 26 (0,0) [ 3.777299] [drm:intelfb_create] re-using BIOS fb [ 3.777321] [drm:intelfb_create] allocated 3200x1800 fb: 0x00000000, bo ffff880272e9db40 [ 3.777380] fbcon: inteldrmfb (fb0) is primary device [ 3.777480] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 3.777481] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 3.777484] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 3.777485] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 373250KHz [ 3.777489] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24 [ 3.777490] [drm:intel_dp_compute_config] DP link bw required 895800 available 1728000 [ 3.777491] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 3.777493] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88002fe1c800 for pipe A [ 3.777494] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 3.777494] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.777495] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.777496] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 4348677, gmch_n: 8388608, link_m: 724779, link_n: 1048576, tu: 64 [ 3.777497] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.777497] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.777498] [drm:intel_dump_pipe_config] requested mode: [ 3.777499] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 3.777500] [drm:intel_dump_pipe_config] adjusted mode: [ 3.777501] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 3.777503] [drm:intel_dump_crtc_timings] crtc timings: 373250 3200 3248 3280 3360 1800 1803 1808 1852, type: 0x48 flags: 0xa [ 3.777503] [drm:intel_dump_pipe_config] port clock: 540000 [ 3.777504] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 3.777505] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 3.777506] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.777507] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.777507] [drm:intel_dump_pipe_config] ips: 0 [ 3.777507] [drm:intel_dump_pipe_config] double wide: 0 [ 3.777508] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.777509] [drm:intel_dump_pipe_config] planes on this crtc [ 3.777511] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 3.777512] [drm:intel_dump_pipe_config] FB:59, fb = 3200x1800 format = 0x34325258 [ 3.777512] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800 [ 3.777513] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 3.777514] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 3.777518] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 3.777520] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 3.777521] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 3.777522] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 3.779665] [drm:intel_edp_backlight_off] [ 3.793256] raid6: sse2x2 gen() 10620 MB/s [ 3.825283] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 3.861243] raid6: sse2x2 xor() 8103 MB/s [ 3.929258] raid6: sse2x4 gen() 12260 MB/s [ 3.981256] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 3.981284] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [ 3.981346] [drm:intel_disable_pipe] disabling pipe A [ 3.997230] raid6: sse2x4 xor() 9261 MB/s [ 3.997544] [drm:edp_panel_off] Turn eDP port A panel power off [ 3.997589] [drm:wait_panel_off] Wait for panel power off time [ 3.997619] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 3.998033] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 3.998034] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 3.998069] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 4.049816] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 4.049816] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 4.049817] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 4.065253] clocksource: Switched to clocksource tsc [ 4.065263] [drm:wait_panel_status] Wait complete [ 4.065268] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 4.065270] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 4.065273] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 4.065274] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 4.065276] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 4.065276] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 4.065277] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 4.065278] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 4.065279] [drm:verify_encoder_state] [ENCODER:54:DP MST-54] [ 4.065280] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 4.065280] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 4.065281] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 4.065282] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 4.065283] [drm:intel_connector_verify_state] [CONNECTOR:53:DP-2] [ 4.065284] [drm:intel_connector_verify_state] [CONNECTOR:57:HDMI-A-2] [ 4.065285] [drm:verify_single_dpll_state] DPLL 0 [ 4.065286] [drm:verify_single_dpll_state] DPLL 1 [ 4.065287] [drm:verify_single_dpll_state] DPLL 2 [ 4.065288] [drm:verify_single_dpll_state] DPLL 3 [ 4.065290] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 4.065291] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 4.065303] [drm:edp_panel_on] Turn eDP port A panel power on [ 4.065310] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 4.065315] raid6: avx2x1 gen() 14661 MB/s [ 4.066400] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 4.066401] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.133188] raid6: avx2x2 gen() 21423 MB/s [ 4.201189] raid6: avx2x4 gen() 22687 MB/s [ 4.201190] raid6: using algorithm avx2x4 gen() 22687 MB/s [ 4.201190] raid6: using avx2x2 recovery algorithm [ 4.201363] xor: automatically using best checksumming function: [ 4.233197] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 4.241187] avx : 23213.000 MB/sec [ 4.409438] Btrfs loaded, crc32c=crc32c-intel, assert=on [ 4.409439] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 [ 4.409439] BTRFS: selftest: sectorsize: 4096 nodesize: 8192 [ 4.409439] BTRFS: selftest: sectorsize: 4096 nodesize: 16384 [ 4.409440] BTRFS: selftest: sectorsize: 4096 nodesize: 32768 [ 4.409440] BTRFS: selftest: sectorsize: 4096 nodesize: 65536 [ 4.409756] BTRFS: device fsid 994363fd-c12c-4c6c-92e9-85e8ac695cf9 devid 1 transid 295632 /dev/nvme0n1p3 [ 4.419080] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0 [ 4.419081] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 4.419082] usb 1-4: Product: Touchscreen [ 4.419083] usb 1-4: Manufacturer: ELAN [ 4.425770] usbcore: registered new interface driver usbhid [ 4.425771] usbhid: USB HID core driver [ 4.585381] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 4.605403] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 4.605410] [drm:wait_panel_status] Wait complete [ 4.605433] [drm:wait_panel_on] Wait for panel power on [ 4.605448] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 4.661604] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 4.661605] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 4.661606] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 4.809778] [drm:wait_panel_status] Wait complete [ 4.809839] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 4.809885] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 4.810302] [drm:intel_dp_get_dpcd] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 [ 4.811051] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 4.811052] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 4.811365] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.811365] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 4.811365] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 4.811664] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 4.811665] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 4.811666] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 4.815558] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682 [ 4.815559] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.815560] usb 1-5: Product: Integrated_Webcam_HD [ 4.815560] usb 1-5: Manufacturer: CKFEH41I373010052032 [ 4.815561] usb 1-5: SerialNumber: 200901010001 [ 4.817124] [drm:drm_dp_dpcd_access] too many retries, giving up [ 4.817461] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 4.817462] [drm:intel_dp_training_pattern] 5.4 Gbps link rate without sink TPS3 support [ 4.818373] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 4.818374] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 4.818374] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 4.819277] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 4.819277] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 4.819278] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 4.820179] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 4.820329] [drm:skylake_pfit_enable] for crtc_state = ffff88002fe1c800 [ 4.820562] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 4.820563] [drm:intel_enable_pipe] enabling pipe A [ 4.820568] [drm:intel_edp_backlight_on] [ 4.820569] [drm:intel_panel_enable_backlight] pipe A [ 4.820607] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 4.820646] [drm:intel_psr_match_conditions] PSR disable by flag [ 4.820646] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 4.837294] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 4.837298] [drm:verify_crtc_state] [CRTC:26] [ 4.837307] [drm:verify_single_dpll_state] DPLL 0 [ 4.837317] [drm:drm_fb_helper_hotplug_event] [ 4.837318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 4.837318] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 4.837676] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.837678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 4.837680] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 4.837682] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 4.837683] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 4.837684] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 4.837685] [drm:intel_power_well_enable] enabling power well 2 [ 4.837687] [drm:skl_set_power_well] Enabling power well 2 [ 4.837701] [drm:intel_power_well_disable] disabling power well 2 [ 4.837706] [drm:skl_set_power_well] Disabling power well 2 [ 4.837707] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 4.837708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 4.837709] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 4.838010] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 4.853537] [drm] RC6 on [ 4.965273] [drm:intel_hdmi_detect] HDMI live status down [ 4.965275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 4.965276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 4.965276] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 4.965277] [drm:intel_power_well_enable] enabling power well 2 [ 4.965278] [drm:skl_set_power_well] Enabling power well 2 [ 4.967357] [drm:intel_power_well_disable] disabling power well 2 [ 4.967362] [drm:skl_set_power_well] Disabling power well 2 [ 4.967363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 4.967364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 4.967365] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 5.093402] [drm:intel_hdmi_detect] HDMI live status down [ 5.093405] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 5.093410] [drm:drm_setup_crtcs] [ 5.093412] [drm:drm_enable_connectors] connector 37 enabled? yes [ 5.093412] [drm:drm_enable_connectors] connector 46 enabled? no [ 5.093413] [drm:drm_enable_connectors] connector 50 enabled? no [ 5.093413] [drm:drm_enable_connectors] connector 53 enabled? no [ 5.093414] [drm:drm_enable_connectors] connector 57 enabled? no [ 5.093416] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 5.093416] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 5.093417] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 3200x1800 [ 5.093418] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 5.093418] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 5.093423] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 5.093423] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 5.093434] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 26 (0,0) [ 5.093453] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 5.093498] Console: switching to colour frame buffer device 400x112 [ 5.093511] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 5.102586] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.114503] [drm:i915_gem_open] [ 5.114676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 5.114679] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 5.115037] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.115041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 5.115043] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 5.115045] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 5.122410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 5.122413] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 5.122416] [drm:intel_power_well_enable] enabling power well 2 [ 5.122419] [drm:skl_set_power_well] Enabling power well 2 [ 5.122438] [drm:intel_power_well_disable] disabling power well 2 [ 5.122443] [drm:skl_set_power_well] Disabling power well 2 [ 5.122446] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 5.122451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 5.122452] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 5.146180] PM: Starting manual resume from disk [ 5.146184] PM: Hibernation image partition 259:2 present [ 5.146185] PM: Looking for hibernation image. [ 5.146299] PM: Image not found (code -22) [ 5.146299] PM: Hibernation image not present or could not be loaded. [ 5.158284] BTRFS info (device nvme0n1p3): disk space caching is enabled [ 5.158288] BTRFS info (device nvme0n1p3): has skinny extents [ 5.169089] BTRFS info (device nvme0n1p3): detected SSD devices, enabling SSD mode [ 5.249396] [drm:intel_hdmi_detect] HDMI live status down [ 5.249400] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 5.249412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 5.249428] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 5.249430] [drm:intel_power_well_enable] enabling power well 2 [ 5.249432] [drm:skl_set_power_well] Enabling power well 2 [ 5.249445] [drm:intel_power_well_disable] disabling power well 2 [ 5.249450] [drm:skl_set_power_well] Disabling power well 2 [ 5.249452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 5.249456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 5.249457] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 5.381410] [drm:intel_hdmi_detect] HDMI live status down [ 5.381415] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 5.381439] [drm:drm_mode_addfb2] [FB:58] [ 5.408510] systemd-journald[138]: Received SIGTERM from PID 1 (systemd). [ 5.549585] BTRFS info (device nvme0n1p3): disk space caching is enabled [ 5.566729] random: nonblocking pool is initialized [ 5.597763] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 5.599485] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 5.604323] ACPI: AC Adapter [AC] (on-line) [ 5.610447] acpi INT33D5:00: intel-hid: created platform device [ 5.620568] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 5.620732] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20160422/nspredef-297) [ 5.620741] ACPI: Invalid package element [0]: got number, expecting [R] [ 5.620742] _ART package 0 is invalid, ignored [ 5.621290] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 2) [ 5.621367] input: Intel HID events as /devices/platform/INT33D5:00/input/input8 [ 5.628315] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 5.644436] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 5.644874] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 5.654521] thermal LNXTHERM:00: registered as thermal_zone3 [ 5.654525] ACPI: Thermal Zone [THM] (25 C) [ 5.662511] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.672596] Bluetooth: Core ver 2.21 [ 5.672627] NET: Registered protocol family 31 [ 5.672629] Bluetooth: HCI device and connection manager initialized [ 5.672632] Bluetooth: HCI socket layer initialized [ 5.672634] Bluetooth: L2CAP socket layer initialized [ 5.672639] Bluetooth: SCO socket layer initialized [ 5.675528] Bluetooth: HCI UART driver ver 2.3 [ 5.675531] Bluetooth: HCI UART protocol H4 registered [ 5.675532] Bluetooth: HCI UART protocol BCSP registered [ 5.675534] Bluetooth: HCI UART protocol LL registered [ 5.675535] Bluetooth: HCI UART protocol ATH3K registered [ 5.675536] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.676703] Bluetooth: HCI UART protocol Intel registered [ 5.676724] Bluetooth: HCI UART protocol BCM registered [ 5.676725] Bluetooth: HCI UART protocol QCA registered [ 5.676726] Bluetooth: HCI UART protocol AG6XX registered [ 5.679403] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937 [ 5.679407] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 5.685704] ACPI: Battery Slot [BAT0] (battery present) [ 5.686126] wmi: Mapper loaded [ 5.689310] int3403 thermal: probe of INT3403:03 failed with error -22 [ 5.689383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.691851] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 5.705720] thermal LNXTHERM:01: registered as thermal_zone7 [ 5.705724] ACPI: Thermal Zone [TZ00] (28 C) [ 5.713846] thermal LNXTHERM:02: registered as thermal_zone8 [ 5.713849] ACPI: Thermal Zone [TZ01] (30 C) [ 5.729713] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 5.758309] AVX2 version of gcm_enc/dec engaged. [ 5.758310] AES CTR mode by8 optimization enabled [ 5.763323] Intel(R) Wireless WiFi driver for Linux [ 5.763326] Copyright(c) 2003- 2015 Intel Corporation [ 5.763397] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002) [ 5.765066] iwlwifi 0000:3a:00.0: Unsupported splx structure [ 5.772476] iwlwifi 0000:3a:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm [ 5.793882] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.807918] iTCO_vendor_support: vendor-support=0 [ 5.808444] dell_wmi: Detected Dell WMI interface version 1 [ 5.808833] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 5.810118] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.810249] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 5.815480] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.815705] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.816724] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.829568] [drm:intel_power_well_enable] enabling power well 2 [ 5.829573] [drm:skl_set_power_well] Enabling power well 2 [ 5.833961] iwlwifi 0000:3a:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 5.835351] Adding 2096124k swap on /dev/nvme0n1p2. Priority:-1 extents:1 across:2096124k SSFS [ 5.836156] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled [ 5.836354] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled [ 5.857035] intel_rapl: Found RAPL domain package [ 5.857039] intel_rapl: Found RAPL domain core [ 5.857041] intel_rapl: Found RAPL domain uncore [ 5.857043] intel_rapl: Found RAPL domain dram [ 5.889709] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.889713] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.889714] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.889715] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.889716] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.889718] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 5.889719] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 5.889720] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 5.893351] device-mapper: uevent: version 1.0.3 [ 5.910551] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 5.913692] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.918647] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5.926241] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 5.927044] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 5.927117] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 5.927174] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 5.927225] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 5.943902] [drm:intel_power_well_disable] disabling power well 2 [ 5.943916] [drm:skl_set_power_well] Disabling power well 2 [ 6.050927] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input16 [ 6.051157] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 6.059089] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input18 [ 6.059308] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01 [ 6.128822] [drm:drm_mode_addfb2] [FB:58] [ 6.143634] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 6.143640] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 6.143653] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 6.159225] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 6.159232] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 6.159243] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 6.258942] systemd-journald[400]: Received request to flush runtime journal from PID 1 [ 6.259689] audit: type=1305 audit(1466516469.388:2): audit_pid=857 old=0 auid=4294967295 ses=4294967295 res=1 [ 6.292305] systemd-journald[400]: File /var/log/journal/69c54807c3cb473b82a49c7b7e022c37/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 6.658122] Linux video capture interface: v2.00 [ 6.662047] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682) [ 6.671552] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20 [ 6.671797] usbcore: registered new interface driver uvcvideo [ 6.671799] USB Video Class driver (1.1.1) [ 6.770197] usbcore: registered new interface driver btusb [ 6.784972] Bluetooth: hci0: read Intel version: 370810011003110e25 [ 6.784976] Bluetooth: hci0: Intel device is already patched. patch num: 25 [ 6.789737] systemd-journald[400]: Received request to flush runtime journal from PID 1 [ 8.121266] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 8.121306] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 8.121307] [drm:intel_power_well_disable] disabling DC off [ 8.121309] [drm:skl_enable_dc6] Enabling DC6 [ 8.121311] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 10.875183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.875187] Bluetooth: BNEP filters: protocol multicast [ 10.875191] Bluetooth: BNEP socket layer initialized [ 10.910128] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 10.940798] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.021469] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 11.026411] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.068224] XFS (dm-0): Mounting V5 Filesystem [ 11.087537] XFS (dm-0): Ending clean mount [ 11.371561] [drm:i915_gem_open] [ 11.382228] [drm:i915_gem_open] [ 11.382513] [drm:i915_gem_open] [ 11.383076] [drm:drm_mode_addfb2] [FB:61] [ 11.437848] [drm:drm_mode_addfb2] [FB:61] [ 11.438272] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 11.438276] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 11.438286] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 11.456086] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 11.456102] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 11.471813] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled [ 11.472080] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled [ 11.536666] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled [ 11.536935] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled [ 11.565498] NET: Registered protocol family 17 [ 11.873705] systemd-journald[400]: File /var/log/journal/69c54807c3cb473b82a49c7b7e022c37/user-486.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.881962] [drm:i915_gem_open] [ 12.316788] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 15.083743] wlan0: authenticate with 20:37:06:f6:24:64 [ 15.088511] wlan0: send auth to 20:37:06:f6:24:64 (try 1/3) [ 15.089642] wlan0: authenticated [ 15.093347] wlan0: associate with 20:37:06:f6:24:64 (try 1/3) [ 15.096542] wlan0: RX AssocResp from 20:37:06:f6:24:64 (capab=0x421 status=0 aid=47) [ 15.097991] wlan0: associated [ 15.136813] wlan0: Limiting TX power to 20 dBm as advertised by 20:37:06:f6:24:64 [ 15.204161] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=dc:53:60:cc:0f:b0:a4:6c:2a:10:43:80:08:00 SRC=9.232.160.4 DST=9.232.160.230 LEN=343 TOS=0x00 PREC=0x00 TTL=255 ID=11711 PROTO=UDP SPT=67 DPT=68 LEN=323 [ 15.266645] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=dc:53:60:cc:0f:b0:a4:6c:2a:10:43:80:08:00 SRC=9.232.160.4 DST=9.232.160.230 LEN=343 TOS=0x00 PREC=0x00 TTL=255 ID=11712 PROTO=UDP SPT=67 DPT=68 LEN=323 [ 15.267804] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=dc:53:60:cc:0f:b0:a4:6c:2a:10:43:80:08:00 SRC=9.232.160.3 DST=9.232.160.230 LEN=343 TOS=0x00 PREC=0x00 TTL=255 ID=53358 PROTO=UDP SPT=67 DPT=68 LEN=323 [ 15.697990] fuse init (API version 7.24) [ 15.744102] [drm:intel_power_well_enable] enabling DC off [ 15.744107] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 15.744110] [drm:intel_power_well_enable] enabling power well 2 [ 15.744113] [drm:skl_set_power_well] Enabling power well 2 [ 15.749896] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.757851] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.759933] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.765542] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.767673] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.773538] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.775684] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.781809] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.783874] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.789560] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.791625] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.794740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 15.794744] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 15.794757] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 15.794806] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 15.795181] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 15.795186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 15.795189] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 15.795192] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 15.795396] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 15.795398] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 15.795407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 15.795411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 15.795412] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 15.795421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 15.795423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 15.795425] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 15.798230] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.800351] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.805518] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.807685] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.813685] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.815772] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.821540] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.882119] Bluetooth: RFCOMM TTY layer initialized [ 15.882126] Bluetooth: RFCOMM socket layer initialized [ 15.882131] Bluetooth: RFCOMM ver 1.11 [ 15.921372] [drm:intel_hdmi_detect] HDMI live status down [ 15.921378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 15.921401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 15.921403] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 16.049353] [drm:intel_hdmi_detect] HDMI live status down [ 16.049358] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 16.051198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 16.051202] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 16.051566] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 16.051571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 16.051575] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 16.051577] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 16.051675] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 16.051677] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 16.051686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 16.051691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 16.051692] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 16.051701] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 16.051703] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 16.051705] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 16.181381] [drm:intel_hdmi_detect] HDMI live status down [ 16.181387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 16.181416] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 16.181417] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 16.309348] [drm:intel_hdmi_detect] HDMI live status down [ 16.309354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 16.310298] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 16.310304] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 16.315196] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 16.315202] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 16.315206] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 16.315208] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 16.315333] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 16.315335] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 16.315344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 16.315348] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 16.315349] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 16.315359] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 16.315362] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 16.315364] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 16.441349] [drm:intel_hdmi_detect] HDMI live status down [ 16.441354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 16.441372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 16.441373] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 16.569354] [drm:intel_hdmi_detect] HDMI live status down [ 16.569360] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 16.613010] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 16.613193] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 16.617157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 16.617162] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 16.618024] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 16.618030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 16.618034] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 16.618037] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 16.618332] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 16.618334] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 16.618344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 16.618350] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 16.618351] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 16.618360] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 16.618362] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 16.618364] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 16.745351] [drm:intel_hdmi_detect] HDMI live status down [ 16.745356] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 16.745375] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 16.745375] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 16.873358] [drm:intel_hdmi_detect] HDMI live status down [ 16.873363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 16.874212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 16.874215] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 16.874702] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 16.874707] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 16.874710] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 16.874712] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 16.874799] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 16.874801] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 16.874809] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 16.874813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 16.874814] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 16.874821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 16.874823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 16.874824] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 17.001365] [drm:intel_hdmi_detect] HDMI live status down [ 17.001383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 17.001401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 17.001402] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 17.038759] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:de53:60ff:fecc:0fb0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=465 TC=0 HOPLIMIT=255 FLOWLBL=408461 PROTO=UDP SPT=5353 DPT=5353 LEN=425 [ 17.097996] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:de53:60ff:fecc:0fb0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=286 TC=0 HOPLIMIT=255 FLOWLBL=408461 PROTO=UDP SPT=5353 DPT=5353 LEN=246 [ 17.129357] [drm:intel_hdmi_detect] HDMI live status down [ 17.129362] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 17.292320] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:de53:60ff:fecc:0fb0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=465 TC=0 HOPLIMIT=255 FLOWLBL=408461 PROTO=UDP SPT=5353 DPT=5353 LEN=425 [ 17.327015] [drm:i915_gem_open] [ 17.327184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 17.327188] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 17.327551] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 17.327556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 17.327559] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 17.327561] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 17.327654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 17.327656] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 17.327665] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 17.327670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 17.327671] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 17.327679] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 17.327682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 17.327684] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 17.453368] [drm:intel_hdmi_detect] HDMI live status down [ 17.453373] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 17.453390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 17.453391] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 17.540716] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:de53:60ff:fecc:0fb0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=465 TC=0 HOPLIMIT=255 FLOWLBL=408461 PROTO=UDP SPT=5353 DPT=5353 LEN=425 [ 17.581363] [drm:intel_hdmi_detect] HDMI live status down [ 17.581371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 17.740888] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:de53:60ff:fecc:0fb0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=429 TC=0 HOPLIMIT=255 FLOWLBL=408461 PROTO=UDP SPT=5353 DPT=5353 LEN=389 [ 17.788503] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 17.788507] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 17.788873] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 17.788887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 17.788890] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 17.788893] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 17.788993] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 17.788994] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 17.789004] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 17.789008] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 17.789009] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 17.789018] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 17.789021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 17.789022] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 17.913369] [drm:intel_hdmi_detect] HDMI live status down [ 17.913375] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 17.913395] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 17.913396] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 18.041371] [drm:intel_hdmi_detect] HDMI live status down [ 18.041377] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 18.046849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 18.046852] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 18.047213] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 18.047218] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 18.047222] [drm:drm_mode_debug_printmodeline] Modeline 38:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa [ 18.047224] [drm:drm_mode_debug_printmodeline] Modeline 39:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa [ 18.047293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] [ 18.047294] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 18.047302] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected [ 18.047305] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] [ 18.047306] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 18.047314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected [ 18.047316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] [ 18.047317] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 18.173388] [drm:intel_hdmi_detect] HDMI live status down [ 18.173393] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected [ 18.173411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 18.173412] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-2] [ 18.301377] [drm:intel_hdmi_detect] HDMI live status down [ 18.301383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 18.849580] [drm:intel_power_well_disable] disabling power well 2 [ 18.849587] [drm:skl_set_power_well] Disabling power well 2 [ 20.758543] tun: Universal TUN/TAP device driver, 1.6 [ 20.758545] tun: (C) 1999-2004 Max Krasnyansky [ 21.049406] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 21.049447] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 21.049448] [drm:intel_power_well_disable] disabling DC off [ 21.049451] [drm:skl_enable_dc6] Enabling DC6 [ 21.049452] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 21.570627] IPv4: martian source 9.232.160.230 from 9.0.154.13, on dev wlan0 [ 21.570631] ll header: 00000000: dc 53 60 cc 0f b0 60 73 5c c5 0d c0 08 00 .S`...`s\..... [ 25.923259] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 31.050823] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 31.844083] IPv4: martian source 153.66.150.226 from 199.27.180.226, on dev tun0 [ 39.089916] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)