[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <576963F3.2050008@opensource.altera.com>
Date: Tue, 21 Jun 2016 10:57:39 -0500
From: Thor Thayer <tthayer@...nsource.altera.com>
To: Rob Herring <robh@...nel.org>
CC: Borislav Petkov <bp@...en8.de>,
Doug Thompson <dougthompson@...ssion.com>,
Mauro Carvalho Chehab <m.chehab@...sung.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"Russell King - ARM Linux" <linux@....linux.org.uk>,
Dinh Nguyen <dinguyen@...nsource.altera.com>,
Grant Likely <grant.likely@...aro.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
<linux-edac@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Thor Thayer <tthayer.linux@...il.com>
Subject: Re: [PATCHv4 4/7] Documentation: dt: socfpga: Add Arria10 Ethernet
binding
On 06/21/2016 10:48 AM, Rob Herring wrote:
> On Tue, Jun 21, 2016 at 9:46 AM, Thor Thayer
> <tthayer@...nsource.altera.com> wrote:
>> Hi Rob,
>>
>>
>> On 06/21/2016 08:33 AM, Rob Herring wrote:
>>>
>>> On Mon, Jun 20, 2016 at 09:50:49AM -0500, tthayer@...nsource.altera.com
>>> wrote:
>>>>
>>>> From: Thor Thayer <tthayer@...nsource.altera.com>
>>>>
>>>> Add the device tree bindings needed to support the Altera Ethernet
>>>> FIFO buffers on the Arria10 chip.
>>>>
>>>> Signed-off-by: Thor Thayer <tthayer@...nsource.altera.com>
>>>> ---
>>>> v2 No Change
>>>> v3 Change to common compatible string based on maintainer comments
>>>> Add local IRQ values.
>>>> v4 Add compatible string for parent node.
>>>> ---
>>>> .../bindings/arm/altera/socfpga-eccmgr.txt | 24
>>>> ++++++++++++++++++++
>>>> 1 file changed, 24 insertions(+)
>>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
>>>> b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
>>>> index 15eb0df..7c714ba 100644
>>>> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
>>>> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
>>>> @@ -82,6 +82,14 @@ Required Properties:
>>>> - interrupts : Should be single bit error interrupt, then double bit
>>>> error
>>>> interrupt, in this order.
>>>>
>>>> +Ethernet FIFO ECC
>>>> +Required Properties:
>>>> +- compatible : Should be "altr,socfpga-eth-mac-ecc"
>>>> +- reg : Address and size for ECC block registers.
>>>> +- parent : phandle to parent (altr,socfpga-stmmac) Ethernet node.
>>>
>>>
>>> Sorry if I wasn't clear before, but I was suggesting changing 'parent'
>>> to 'altr,ethernet-mac':
>>>
>>> altr,ethernet-mac = <&gmac0>;
>>>
>>> Rob
>>>
>> Ahh, I see what you're saying.
>>
>> I used parent as the tag because I have a generic function for validating
>> that the parent status is "okay" using the "parent" string in my
>> validate_parent_available() function (see below).
>
> Ah, so common ecc-mgr code is parsing it. Then how about 'altr,ecc-parent'?
>
> Rob
>
That's clean - I'll change to that string. Thanks!
Powered by blists - more mailing lists