[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1466639150-27814-1-git-send-email-john.stultz@linaro.org>
Date: Wed, 22 Jun 2016 16:45:50 -0700
From: John Stultz <john.stultz@...aro.org>
To: lkml <linux-kernel@...r.kernel.org>
Cc: John Stultz <john.stultz@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...eaurora.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Stephen Boyd <stephen.boyd@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org
Subject: [RESEND][PATCH] device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey
Since the pmic8xxx-pwrkey driver is already supported in the
qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
configure proper device shutdown when ps_hold goes low, it is
better to use that driver then a generic gpio button.
Thus this patch remove the gpio power key entry here, so we
don't get double input events from having two drivers enabled.
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Andy Gross <agross@...eaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Stephen Boyd <stephen.boyd@...aro.org>
Cc: linux-arm-msm@...r.kernel.org
Cc: devicetree@...r.kernel.org
Acked-by: Rob Herring <robh@...nel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 32fedfa..7b05f07 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -29,12 +29,6 @@
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
- gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- gpio-key,wakeup;
- };
volume_up {
label = "Volume Up";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
--
1.9.1
Powered by blists - more mailing lists