[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1466603939-7526-6-git-send-email-tthayer@opensource.altera.com>
Date: Wed, 22 Jun 2016 08:58:56 -0500
From: <tthayer@...nsource.altera.com>
To: <bp@...en8.de>, <dougthompson@...ssion.com>,
<m.chehab@...sung.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
<galak@...eaurora.org>, <linux@....linux.org.uk>,
<dinguyen@...nsource.altera.com>, <grant.likely@...aro.org>
CC: <devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <tthayer.linux@...il.com>,
<tthayer@...nsource.altera.com>
Subject: [PATCHv5 5/8] Documentation: dt: socfpga: Add Arria10 Ethernet binding
From: Thor Thayer <tthayer@...nsource.altera.com>
Add the device tree bindings needed to support the Altera Ethernet
FIFO buffers on the Arria10 chip.
Signed-off-by: Thor Thayer <tthayer@...nsource.altera.com>
---
v2 No Change
v3 Change to common compatible string based on maintainer comments
Add local IRQ values.
v4 Add compatible string for parent node.
v5 Change parent phandle name to altr,ecc-parent
---
.../bindings/arm/altera/socfpga-eccmgr.txt | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 15eb0df..b545856 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -82,6 +82,14 @@ Required Properties:
- interrupts : Should be single bit error interrupt, then double bit error
interrupt, in this order.
+Ethernet FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-eth-mac-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
Example:
eccmgr: eccmgr@...06000 {
@@ -108,4 +116,20 @@ Example:
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
<33 IRQ_TYPE_LEVEL_HIGH> ;
};
+
+ emac0-rx-ecc@...c0800 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0800 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@...c0c00 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0c00 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
--
1.7.9.5
Powered by blists - more mailing lists